I really love to make use-for-nothing robots such as Drinky (Drinking buddy robot). I want to make a robot for emotional purpose not for functional. This is fun, makes smile and feels good.
This robot is also one of useless robot but, I'd like to make a funny robot! There are many coin-eating robots (Robie). I'm going to make it by using 3d printer and an Arduino.
All source code and 3d printing modeling files are opensource. Feel free to make it by yourselves.
Youtube https://youtu.be/KfP_LfUiwdc
Manual https://eunchan.me/Hungry-Robot-1bac36202aae469e806f882e0308ce18
Source Code https://github.com/happythingsmaker/TrashEatingRobot
3D printing files https://www.thingiverse.com/thing:2824451
Youtube http://youtube.com/EunchanPark
Arduino Nano
ATmega328P (Old Bootloader)
if you plug the Arduino, a new com port will be appeared
Brim setting needs at least 1 mm
In this circuit, all parts are connected with Female - Female Dupont Cable. In order to save space in the robot, we need to cut and re-wire manually.
A servo motor uses 3 pins. Vcc and GND is essential. A PWM pin must be allocated with the servo motor. In this project, pin 12 is used.
The sensor is an infrared sensor. The sensor uses 3 wires as well. In order to read distance from an object, the arduino neeeds to read an analog input. In this project, A7 pin is allocated.
Servo : PIN 12
Sensor : Analog 7
In this circuit, all parts are connected with female-female Dupont cable.
in order to save space in the robot we need to cut and rewire manually. This sensor is an infrared sensor The sensor uses three wires. in order to read distance from an object, the Arduino needs to read analog signal from this sensor. we are going to use pin A7 for obtaining the sensor value
Strip the cable end by using a stripper
A servo motor uses three pins. VCC ground and PWM.
A pwm pin from the Arduino must be allocated with the servo motor. In this project we are going to use pin 13.
Let's assemble hardware part.
The black one is a horn from servo motor. We need to use the screwdriver and screw bolt.
and fix the motor with the body.
Use the cable tie from inside to outside.
cut the rest of cable tie. it's very simple you don't need to use bolt anymore.
I'm gonna assemble the head part in the same way. Put the cable tie through the hole and use one more cable tie. Check the head moves well. Cut the rest of them
This part is most important part. This is a link and it links from head to body. Assemble them together in same way. Try some move
Make sure the color, location and pin numbers
make sure the colors
And then, assemble the cover
I used Blu Tack