MonoPrice 3D Printer

All settings that I changed (everything else was left at default)

From the Toolbar - Devices -> Monoprice 3D

Create a Duplicate of Standard, name monoprice dual 3d

Device Settings - Extruder temp - 220 C

Platform Temp - 60 C

Travel Speed - 120mm/s

Z-axis Travel Speed - 18mm/s

Minimum layer duration - 5.0 s

Extrusion Speeds

Print Speeds - cut all in half

Filament Cooling Fan Speed - all default (.50 or 50 percent)

Model Properties

Layer height .40 mm or .20 mm (for a more precise but slower print)

Raft

Raft - uncheck the Raft box

RIght/Left Extruder

Filament Diameter - 1.75 (check the filament for exact size)

Retraction Distance - 1.3 mm

Retraction Speed - 20.mm/s

Multi-Material Printing

Support Material Extruder - 1 (if you want to print supports from left extruder)

Raft Material Extruder - 1 (if you want to print the raft from left extruder)

Others (3d objects with overhang)

duplicated a second profile (monoprice Dual 3d) - name monoprice dual 3d with support

Raft

Raft - check the raft box

Supports and Bridging

Check the Support box and the Breakaway Support box