9.1 Sensor Parameter
[ menu key ] -> [ Setting ]
-> [ Sensor Parameter ] -> the following screen
Here, set the following items.
Parameters of the GPS sensor.
Number of data sending by a single email.
Detection radius approaching waypoints.
Geoid altitude.
9.1.1 two GPS sensor parameters.
GPS distance: distance interval to measure location.
GPS time : time interval to update location.
In the main screen, these values should be small,
they increase in eco mode.
9.1.2 Num. of data by a email
Number of data sending by a single email is this.
A single email with this number of your location
data will be sent at each interval time of that is
this number × GPS time(main screen),
if you set an entrants.
At eco mode, an email with a single your location
data will be send by each GPS time interval of eco
mode.
9.1.3 th. of distance
Detection radius approaching waypoints is this. It will be indicated by a aqua blue circle around a waypoint.
Set this, if you set waypoints. The distance between
the nearest waypoint, if it falls below this value, the
main screen is restarted automatically.
9.1.4 geoid alti.
Elevation above sea level
= GPS altitude(degree rotating ellipsoid)
- geoid altitude
Subtracting the geoid altitude entered from GPS
measurements of your smartphone, this application
displays its value as altitude of a main screen.
Investigate the regional geoid altitude(m)
where you will use, please enter it.
The default value is the value of Tokyo.