2. The outline

2.1.Before Trip (log) start

Before beginning a trip, you'll name this trip. Your track is indicated on the map while recording your log in a trip respectively. So naming a trip is need and one of planning.

You'll also can make other planning. These are location setting of waypoints (start point, passage points and goal point), route setting(the passage order setting of an established waypoints) and a friend registration setting (nickname and friend's e-mail address).

When these planning is done, way points and route and a friend's track are indicated on the map and a friend's log is recorded.

Of course, only either's setting is possible. The established item is indicated. (When waypoints are set in advance, routes can be established. )

When need is not, these two setting is unnecessary.

2.2. During Trip(logging)

Your logs can be displayed.

Eco-mode for phone battery is supported.

Display is stopped then. When even the distance

you established is close to the way point you set

before trip, this application is restarted

automatically. Of course it's possible to restate

anytime.

A friend's track can be displayed using e-mail, if a

friend was set and chosen before trip,

Map, Satellite photo can display your track up or

north up.

Other presentation items

Compass.

GPS altitude.

GPS speed.

GPS bearing(Track Up).

Stop watch.

Pitch & Roll (can be calibrated).

Cylinder circle & Approach circle as way point,

if you set.

Route, if you set.

2.3. After Trip

Your log and/or a friend's log is saved.

Summary, chart of your log can be displayed.

chart items

GPS altitude with GPS valio

GPS speed

GPS valio

pitch

roll

Remark can be edited.

Log's kml format file, gpx format file, csv format file

can be sent by e-mail.

Of Course these can be read using a USB cable.

Your history can be selected & displayed.

2.4. Before Trip

Naming a trip is need

Way points can be set.

You connect between waypoints above-mentioned

by a straight line, and make route(Equiangular

route).

A friend can be chosen.

GPS sensor parameters can be set.