5. Instructions on the main screen

[L]Button

After planning and/or setting, click [L]button.

Then the color of letter of [L] and [S] will be changed aqua blue and the sensor will be started and the logging will be started.

After [L]Button is clicked

1. GPS is started, and from the Internet obtain the

map your position is center at.

2. display it on screen.

3. Screen is track-up mode.

4. Stopwatch is started.

5. Compass, Roll and Pitch sensor are started.

6. Will start sending and receiving e-mail, if you set

entrants in advance.

Again, if you click the [L]button, logging is terminated and the sensor will be stopped. Your log will be saved automatically. If you set entrants in advance, friend's log will be saved. Then the color of letter of [L] and [S] will be changed red.

[S]Button

Click [S]button, then the color of letter of [S] will be changed aqua blue and the sensor will be started.

After [S]Button is clicked

1. GPS is started, and from the Internet obtain the

map your position is center at.

2. display it on screen.

3. Screen is track-up mode.

Stopwatch is not started.

4. Compass, Roll and Pitch sensor are started.

Will not start sending and receiving e-mail.

Again, if you click the [S]button, sensor is terminated. And this application ask you whether you want to save your log. The color of letter of [S] will be changed red.

That is, the [S]button will check the sensor or you can see the results of sensor when you do not want to save logs.

[R]Button can be use at any time

With each click, you receive e-mail.

When you have finished your move, no longer the sensor is necessary. You terminate sensor function for energy-saving your smart phone.

However, friend is still in transit, may have sent his location by e-mail. So, if you set entrants in advance, sometimes click [R] button, please e-mail received. Track of your friends will be updated and saved.

[Roll Pitch Calibration]button will work, while the sensor is enabled

After [S]Button or [L]Button is clicked, this button will be enabled. After you mount your smart phone, when you move horizontally, click this button. Then calibration will be started. And pitch and roll will be flat.

Thereafter, on the basis of this condition, roll and pitch are measured and are displayed. Ifduring the sensing, you can click on this button as many times as necessary.

[Track],[North]button will work, while the sensor is enabled

This compass has declination correction.

If less than 2km/h, the compass will show using the z-axis orientation sensor.

For more than 2km/h, the compass will show using the bearing with the GPS sensor.

[Stopwatch]button & [C]button can be use at any time

When background color is yellow, stopwatch is counting up. Click [Stopwatch]button, then background color will be black and stopwatch display the lag time. When you click[Stopwatch]button again to display the time count up continuously.

When background color is yellow and you click [C]button, stopwatch begin to count up from 0 after cleared.

In order to clear the stopwatch, you change the background color to black, and then click [C]button.

When background color is black, Click [Stopwatch]button, then background color will be yellow and stopwatch start to count up.

[Map],[Photo]button can be use at any time

[AJ],[J],[+],[-]button can be use at any time