Main Hud shows you:
Flight time display
Altitude / Real Altitude
Speed in Meters per Second - m/s
Compass
Artificial horizon
Collective/Pitch - Multi Info Display
5 Cam settings (lock, follow, dynamic close, dynamic wide, off)
Instruction Manual:
- Rezz the RF BELL 47G physical Part. The helicopter will rezz the attachement part automaticly.
- As the pilot choose 'pilot' by right clicking on the rotors or front from canopy
- Passangers use heli icon on the left side to sit
Chat commands: - must type in lower case
- 'HELP' to see this short manual again
- 'START' 'STOP' the engine
- 'L' turns position lights on/off
- 'A' switch altitude display between barometrically and real flight level
- 'AS' set barometrically altitude to zero
- 'AR' reset barometrically alt to 20 meter sea level
- 'CAM' tursn dynamic cam on/off (turn on if flying without HUD)
- 'TEXT' turns hover text flight data on/off (turn on if flying without HUD)
- 'COPILOT' to authorize your copilot to fly the helicopter (working in flight)
- 'PILOT' to get control back
- 'EJ' to unsit your copilot
- Touch the HUD to change cam style!
To Take off:
- Start the engine (takes 20 seconds)
- Add pitch (collective) to 51% > heli beginns to rise... (50% pitch is neutral hovering without movement in any direction)
- Touch FWD (Cyclic) DO NOT HOLD FWD BUTTON! > Heli takes nose down and get fwd-speed but loses altitude. add collective to compensate for this...
Watch your speed and altitude...
- SHIFT+LEFT/RIGHT lets you move your heli sideways (not in mouselook!)
HInt: 53-62% pitch for a smooth forward flight... while you hold flight level with cyclic