forms.properties

LOCATION :

$IAS_ORACLE_HOME/Apache/Jserv/etc

SIGNIFICANCE :

IMPORTANT POINTS :

FILE :

#########################################################################################################

# $Header: forms_ux.properties 115.25 2007/06/18 12:20:32 skocherl ship $

###############################################################################

#    JServ Configuration File for Oracle HTTP Server (powered by Apache)      #

###############################################################################

################################ W A R N I N G ################################

# Unlike normal Java properties, JServ configurations have some important 

# extentions:

#

#    1) commas are used as token separators

#    2) multiple definitions of the same key are concatenated in a 

#       comma-separated list.

###############################################################################

#

# ###############################################################

# 

# This file is automatically generated by AutoConfig.  It will be read and

# overwritten.  If you were instructed to edit this file, or if you are not

# able to use the settings created by AutoConfig, refer to Metalink document

# 165195.1 for assistance.

# 

# ###############################################################

#

# Execution parameters

#######################

# The Java Virtual Machine interpreter.

# Syntax: wrapper.bin=[filename] (String)

# Note: specify a full path if the interpreter is not visible in your path.

wrapper.bin=/eb_rao1_q/applmgr/qatora/iAS/Apache/Apache/bin/java.sh

# Arguments passed to Java interpreter (optional)

# Syntax: wrapper.bin.parameters=[parameters] (String)

# Default: NONE

wrapper.bin.parameters=-verbose:gc -hotspot -Xmx1152M -Xms384M -XX:MaxPermSize=128M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB

# Fix for Bug 3389611. To support headless operation in Java AWT. 

wrapper.bin.parameters=-Djava.awt.headless=false

# For enabling JMX monitoring. Bug#5459173

wrapper.bin.parameters=-Dcom.sun.management.jmxremote

wrapper.bin.parameters=-Dcom.sun.management.jmxremote.ssl=false 

# lines for forms

wrapper.bin.parameters=-DFND_TOP=/eb_rao1_q/applmgr/qatappl/fnd/11.5.0

wrapper.bin.parameters=-Djava.protocol.handler.pkgs=HTTPClient

#Fix for Bug 4047469. To reduce synchronization of access of session vars.

wrapper.bin.parameters=-Djserv.session.getValue.instrument=false

# Apache JServ entry point class (should not be changed)

# Syntax: wrapper.class=[classname] (String)

# Default: "org.apache.jserv.JServ"

# Arguments passed to main class after the properties filename (not used)

# Syntax: wrapper.class.parameters=[parameters] (String)

# Default: NONE

# Note: currently not used

# PATH environment value passed to the JVM

# Syntax: wrapper.path=[path] (String)

# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems

#          "c:\(windows-dir);c:\(windows-system-dir)" for Win32 systems

# Notes: if more than one line is supplied these will be concatenated using

#        ":" or ";" (depending wether Unix or Win32) characters

#        Under Win32 (windows-dir) and (windows-system-dir) will be

#        automatically evaluated to match your system requirements

wrapper.path=/eb_rao1_q/applmgr/qatora/8.0.6/bin

wrapper.path=/eb_rao1_q/applmgr/qatappl/fnd/11.5.0/bin

# CLASSPATH environment value passed to the JVM

# Syntax: wrapper.classpath=[path] (String)

# Default: NONE (Sun's JDK/JRE already have a default classpath)

# Note: if more than one line is supplied these will be concatenated using

#       ":" or ";" (depending wether Unix or Win32) characters. JVM must be

#       able to find JSDK and JServ classes and any utility classes used by

#       your servlets.

# Note: the classes you want to be automatically reloaded upon modification

#       MUST NOT be in this classpath or the classpath of the shell

#       you start the Apache from.

#

wrapper.classpath=/eb_rao1_q/applmgr/qatora/iAS/Apache/Jserv/libexec/ApacheJServ.jar

wrapper.classpath=/eb_rao1_q/applmgr/qatora/iAS/Apache/Jsdk/lib/jsdk.jar

# ----- iAS 1022 -----

wrapper.classpath=/eb_rao1_q/applmgr/qatora/iAS/jsp/lib/ojsp.jar

wrapper.classpath=/eb_rao1_q/applmgr/qatora/iAS/jsp/lib/ojsputil.jar 

wrapper.classpath=/eb_rao1_q/applmgr/qatora/iAS/lib/servlet.jar

wrapper.classpath=/eb_rao1_q/applmgr/qatcomn/java/xmlparserv2-904.zip

#---------------------

wrapper.classpath=/eb_rao1_q/applmgr/qatora/iAS/sqlj/lib/translator.zip

wrapper.classpath=/eb_rao1_q/applmgr/qatcomn/java/jbojdbcpatch.zip

wrapper.classpath=/eb_rao1_q/applmgr/qatcomn/java/jdbc14.zip

wrapper.classpath=/eb_rao1_q/applmgr/qatcomn/java/nls_charset12.zip

wrapper.classpath=/eb_rao1_q/applmgr/qatcomn/java/apps.zip

wrapper.classpath=/eb_rao1_q/applmgr/qatcomn/java

wrapper.classpath=/opt/java1.5/lib/dt.jar

wrapper.classpath=/opt/java1.5/lib/tools.jar

wrapper.classpath=/opt/java1.5/jre/lib/rt.jar

wrapper.classpath=/opt/java1.5/jre/lib/charsets.jar

wrapper.classpath=/eb_rao1_q/applmgr/qatora/iAS/jlib/jssl-1_1.jar 

wrapper.classpath=/eb_rao1_q/applmgr/qatora/iAS/jlib/javax-ssl-1_1.jar 

wrapper.classpath=/eb_rao1_q/applmgr/qatora/8.0.6/forms60/java

# ----- iAS 1022 -----

wrapper.classpath=/eb_rao1_q/applmgr/qatora/iAS/Apache/Jserv/libexec/dms2Server.jar

# Oracle XSQL Servlet

wrapper.classpath=/eb_rao1_q/applmgr/qatora/iAS/lib/oraclexsql.jar

# Oracle XML SQL Components for Java

wrapper.classpath=/eb_rao1_q/applmgr/qatora/iAS/rdbms/jlib/xsu12.jar

# XSQLConfig.xml File location

wrapper.classpath=/eb_rao1_q/applmgr/qatora/iAS/xdk/lib

#----- Forms Servlet ------

wrapper.classpath=/eb_rao1_q/applmgr/qatora/8.0.6/forms60/java/f60srv.jar

#-----------------------                                                                                

# An environment name with value passed to the JVM

# Syntax: wrapper.env=[name]=[value] (String)

# Default: NONE on Unix Systems

#          SystemDrive and SystemRoot with appropriate values on Win32 systems

wrapper.env=LD_LIBRARY_PATH=/eb_rao1_q/applmgr/qatora/8.0.6/lib:/eb_rao1_q/applmgr/qatora/iAS/lib:/eb_rao1_q/applmgr/qatora/8.0.6/lib:/usr/dt/lib:/usr/openwin/lib

wrapper.env=SHLIB_PATH=/eb_rao1_q/applmgr/qatora/8.0.6/lib:/eb_rao1_q/applmgr/qatora/iAS/lib:/eb_rao1_q/applmgr/qatora/8.0.6/lib:/usr/dt/lib:/usr/openwin/lib

wrapper.env=LIBPATH=/eb_rao1_q/applmgr/qatora/8.0.6/lib:/eb_rao1_q/applmgr/qatora/iAS/lib:/eb_rao1_q/applmgr/qatora/8.0.6/lib:/usr/dt/lib:/usr/openwin/lib

wrapper.env=WV_GATEWAY_CFG=/eb_rao1_q/applmgr/qatora/iAS/Apache/modplsql/cfg/wdbsvr.app

# The new, OACore self-service framework uses a Java package called Tecate.

# Unix needs a display to use. (Win32 always has a windowing system).

wrapper.env=DISPLAY=tneda06n:15.0

# An environment name with value copied from caller to Java Virtual Machine

# Syntax: wrapper.env.copy=[name] (String)

# Default: NONE

# Copies all environment from caller to Java Virtual Machine

# Syntax: wrapper.env.copyall=[true|false] (boolean)

# Default: false

wrapper.env.copyall=false

# Protocol used for signal handling

# Syntax: wrapper.protocol=[name] (String)

# Default: ajpv12

#

# General parameters

######################

# Set the default IP address or hostname Apache JServ binds (or listens) to.

#

# If you have a machine with multiple IP addresses, this address

# will be the one used. If you set the value to localhost, it

# will be resolved to the IP address configured for the locahost

# on your system (generally this is 127.0.0.1). This feature is so 

# that one can have multiple instances of Apache JServ listening on 

# the same port number, but different IP addresses on the same machine.

# Use bindaddress=* only if you know exactly what you are doing here,

# as it could let JServ wide open to the internet.

# You must understand that JServ has to answer only to Apache, and should not

# be reachable by nobody but mod_jserv. So localhost is usually a

# good option. The second best choice would be an internal network address

# (protected by a firewall) if JServ is running on another machine than Apache.

# Ask your network admin.

# "*" _may_ be used on boxes where some of the clients get connected using

# "localhost"and others using another IP addr.

#

# Syntax: bindaddress=[ipaddress] or [localhost] or [*]

# Default: localhost

bindaddress=tneda06n.adr.corp.com

# The port parameter sets the port Apache JServ listens to. If no port is

# specified as in the third example then the JServ process randomly selects

# its own ports. If valid ports are specified then those ports are used by

# the automatically started JServ processes. The number of ports specified

# here should be greater than or equal to the total number of processes

# being automatically started.

# Syntax: port=[port1][,port2-port3] (int)

# Default: 8007

# Example1: port=

#           ports are randomly chosen by the JServ's

# Example2: port=8007

#           port 8007 could be used by a JServ

# Example3: port=8007, 8009, 8006

#           port 8007, 8009, and 8006 could be used by JServ's

# Example4: port=8007,8008-8010,8011,8012-8020

#           ports range from 8007 to 8020 could be used by JServ's

# If the total number of processes specified in jserv.conf is n, then

# at least n ports should be specified.

port=18130-18139

#

# Servlet Zones parameters

###########################

# List of servlet zones Apache JServ manages

# Syntax: zones=[servlet zone],[servlet zone]... (Comma separated list of String)

# Default: NONE

zones=forms

# Configuration file for each servlet zone (one per servlet zone)

# Syntax: [servlet zone name as on the zones list].properties=[full path to configFile] (String)

# Default: NONE

# Note: if the file could not be opened, try using absolute paths.

forms.properties=/eb_rao1_q/applmgr/qatora/iAS/Apache/Jserv/etc/formservlet.properties

#

# Thread Pool parameters

#########################

# Enables or disables the use of the thread pool.

# Syntax: pool=[true|false] (boolean)

# Default: false

# WARNING: the pool has not been extensively tested and may generate deadlocks. 

# For this reason, we advise against using this code in production environments.

pool=false

# Indicates the number of idle threads that the pool may contain.

# Syntax: pool.capacity=(int)>0

# Default: 10

# NOTE: depending on your system load, this number should be low for contantly

# loaded servers and should be increased depending on load bursts.

pool.capacity=10

# Indicates the pool controller that should be used to control the 

# level of the recycled threads.

# Syntax: pool.controller=[full class of controller] (String)

# Default: org.apache.java.recycle.DefaultController

# NOTE: it is safe to leave this unchanged unless special recycle behavior

# is needed. Look at the "org.apache.java.recycle" package javadocs for more

# info on other pool controllers and their behavior.

pool.controller=org.apache.java.recycle.DefaultController

#

# Security parameters

#####################

# Enable/disable the execution of org.apache.jserv.JServ as a servlet.

# This is disabled by default because it may give informations that should

# be restricted.

# Note that the execution of Apache JServ as a servlet is filtered by the web

# server modules by default so that both sides should be enabled to let this 

# service work.

# This service is useful for installation and configuration since it gives 

# feedback about the exact configurations Apache JServ is using, but it should

# be disabled when both installation and configuration processes are done.

# Syntax: security.selfservlet=[true|false] (boolean)

# Default: false

# WARNING: disable this in a production environment since may give reserved

# information to untrusted users.

security.selfservlet=true

# Set the maximum number of socket connections Apache JServ may handle 

# simultaneously. Make sure your operating environment has enough file

# descriptors to allow this number.

# Syntax: security.maxConnections=(int)>1

# Default: 50

security.maxConnections=256

# Backlog setting for very fine performance tunning of JServ.

# Unless you are familiar to sockets leave this value commented out.

# security.backlog=5

# List of IP addresses allowed to connect to Apache JServ. This is a first 

# security filtering to reject possibly unsecure connections and avoid the 

# overhead of connection authentication.

# <warning>

# (please don't use the following one unless you know what you are doing : 

#    security.allowedAddresses=DISABLED

#   allows connections on JServ'port from entire internet.)

#   You do need only to allow YOUR  Apache to talk to JServ.

# </warning>

#

# Default: 127.0.0.1

# Syntax: security.allowedAddresses=[IP address],[IP Address]... (Comma separated list of IP addresses)

security.allowedAddresses=127.0.0.1,tneda06n.adr.corp.com

# Enable/disable connection authentication. 

# NOTE: unauthenticated connections are a little faster since authentication 

# handshake is not performed at connection creation.

# WARNING: authentication is disabled by default because we believe that

# connection restriction from all IP addresses but localhost reduces your

# time to get Apache JServ to run. If you allow other addresses to connect and

# you don't trust it, you should enable authentication to prevent untrusted

# execution of your servlets. Beware: if authentication is disabled and the

# IP address is allowed, everyone on that machine can execute your servlets!

# Syntax: security.authentication=[true,false] (boolean)

# Default: true

security.authentication=true

# Authentication secret key.

# The secret key is passed as a file that must be kept secure and must

# be exactly the same of those used by clients to authenticate themselves.

# Syntax: security.secretKey=[secret key path and filename] (String)

# Default: NONE

# Note: if the file could not be opened, try using absolute paths.

security.secretKey=/eb_rao1_q/applmgr/qatora/iAS/Apache/Jserv/conf/jserv.secret.key

# Length of the randomly generated challenge string (in bytes) used to

# authenticate connections. 5 is the lowest possible choice to force a safe

# level of security and reduce connection creation overhead.

# Syntax: security.challengeSize=(int)>5

# Default: 5

security.challengeSize=10

#

# Logging parameters

####################

# Enable/disable Apache JServ logging.

# WARNING: logging is a very expensive operation in terms of performance. You

# should reduced the generated log to a minumum or even disable it if fast 

# execution is an issue.  Note that if all log channels (see below) are

# enabled, the log may become really big since each servlet request may

# generate many Kb of log. Some log channels are mainly for debugging

# purposes and should be disabled in a production environment.

# Syntax: log=[true,false] (boolean)

# Default: true

log=false

# Set the name of the trace/log file.  To avoid possible confusion about

# the location of this file, an absolute pathname is recommended.

# 

# This log file is different than the log file that is in the

# jserv.conf file. This is the log file for the Java portion of Apache

# JServ.

#

# On Unix, this file must have write permissions by the owner of the JVM

# process. In other words, if you are running Apache JServ in manual mode

# and Apache is running as user nobody, then the file must have its

# permissions set so that that user can write to it.

# Syntax: log.file=[log path and filename] (String)

# Default: NONE

# Note: if the file could not be opened, try using absolute paths.

log.file=/eb_rao1_q/applmgr/qatora/iAS/Apache/Jserv/logs/forms.log

# Enable the timestamp before the log message

# Syntax: log.timestamp=[true,false] (boolean)

# Default: true

log.timestamp=true

# Use the given string as a data format 

# (see java.text.SimpleDateFormat for the list of options)

# Syntax: log.dateFormat=(String)

# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]

log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]

# Since all the messages logged are processed by a thread running with

# minimum priority, it's of vital importance that this thread gets a chance

# to run once in a while. If it doesn't, the log queue overflow occurs,

# usually resulting in the OutOfMemoryError.

#

# To prevent this from happening, two parameters are used: log.queue.maxage

# and log.queue.maxsize. The former defines the maximum time for the logged

# message to stay in the queue, the latter defines maximum number of

# messages in the queue.

#

# If one of those conditions becomes true (age > maxage || size > maxsize),

# the log message stating that fact is generated and the log queue is

# flushed in the separate thread.

#

# If you ever see such a message, either your system doesn't live up to its

# expectations or you have a runaway loop (probably, but not necessarily,

# generating a lot of log messages).

#

# WARNING: Default values are lousy, you probably want to tweak them and

# report the results back to the development team.

# Syntax: log.queue.maxage = [milliseconds]

# Default: 5000

log.queue.maxage = 5000

# Syntax: log.queue.maxsize = [integer]

# Default: 1000

log.queue.maxsize = 1000

# Enable/disable logging the channel name

# Default: false

log.channel=false

# Enable/disable channels, each logging different actions.

# Syntax: log.channel.[channel name]=[true,false] (boolean)

# Default: false

# Info channel - quite a lot of informational messages

# hopefully you don't need them under normal circumstances

log.channel.info=false

# Servlets exception, i.e. exception caught during 

# servlet.service() processing are monitored here

# you probably want to have this one switched on

log.channel.servletException=true

# JServ exception, caught internally in jserv

# we suggest to leave it on

log.channel.jservException=true

# Warning channel, it catches all the important

# messages that don't cause JServ to stop, leave it on

log.channel.warning=true

# Servlet log

# All messages logged by servlets. Probably you want 

# this one to be switched on.

log.channel.servletLog=true

# Critical errors

# Messages produced by critical events causing jserv to stop

log.channel.critical=true

# Debug channel

# Only for internal debugging purposes

log.channel.debug=false