Kim Gwang-Ho
PUBLICATIONS
1. J. J. Park, G. H. Kim, S. M. Hong, S. H. Lee, M. K. Lee , C. K. Rhee,
Properties of dispersion casting of Y2O3 particles in hypo, hyper and eutectic binary Al-Cu alloys,
J. Mater. Sci. Technol., Vol. 24, No. 1, pp. 57-59, 1, 2008
2. J. J. Park, G. H. Kim, S. M. Hong, S. H. Lee, M. K. Lee , C. K. Rhee,
An investigation of dispersion behavior of Y2O3 ceramic particles in hypo,
eutectic and hyper binary Al-Cu cast alloys,
J. Kor. Powder Metall. Inst., Vol. 14, No. 2, pp. 123-126, 4, 2007
3. M. K. Lee, G. H. Kim, S. M. Hong, J. K. Lee, S. J. Hong, Y. R. Uhm, C. K. Rhee,
The mechanical milling behavior of ductile Cu flakes when using ultrafine Al2O3 reinforcements,
Solid State Phenomena, Vol. 119, pp. 179-182, 4, 2007
4. G. H. Kim, M. K. Lee, G. M. Kim, S. M. Hong, W. W. Kim, C. K. Rhee,
Erosion resistance and its mechanism for flame-hardened 12Cr steel
by high speed water drop impacts,
Solid State Phenomena, Vol. 118, pp. 179-184, 7, 2006
5. G. H. Kim, M. K. Lee, G. M. Kim, S. M. Hong, W. W. Kim, C. K. Rhee,
Optimization of movable flame hardening process for the turbine blade 12Cr steel,
Solid State Phenomena, Vol. 118, pp. 185-190, 7, 2006
6. M. K. Lee, G. H. Kim, K. H. Kim, S. M. Hong, W. W. Kim, S. J. Hong, C. K. Rhee,
Formation of tensile stress induced cracks in flame hardening surface treatment of 12Cr blade steel,
Solid State Phenomena, Vol. 118, pp. 191-196, 7, 2006
7. S. M. Hong, M. K. Lee, G. H. Kim, C. K. Rhee, K. H. Kim, W. W. Kim,
Analysis of fatigue fracture of the flame-quenched 8.8Al-bronze by ultrasonic vibratory cavitation erosion,
Solid State Phenomena, Vol. 118, pp. 463-468, 7, 2006
8. Gwang-Ho Kim, Min-Ku Lee, Kyeong-Ho Kim, Whung-Whoe Kim, Chang-Kyu Rhee, Gil-Mu Kim, Characteristics of flame hardening process for 12Cr steels,
J. Kor. Inst. Surf. Eng., Vol. 39, No. 2, pp. 49-56, 3, 2006
9. M. K. Lee, G. H. Kim, K. H. Kim, W. W. Kim,
Effects of the surface temperature and cooling rate on the residual stresses
in a flame hardening of 12Cr steel,
J. Mater. Process Tech., Vol. 176, pp. 140-145, 3, 2006
10. M. K. Lee, S. M. Hong, G. H. Kim, K. H. Kim, C. K. Rhee, W. W. Kim,
Numerical correlation of the cavitation bubble collapse load
and frequency with the pitting damage of flame quenched Cu-9Al-4.5Ni-4.5Fe alloy,
Mat. Sci. Eng. A, Vol. 425, pp. 15-21, 3, 2006
11. Min-Ku Lee, Sung-Mo Hong, Gwang-Ho Kim, Chang-Kyu Rhee,
Investigation of the impact load and erosive pit damage on the SUS316 and 8.8Al-bronze alloys
by cavitation bubble collapse,
J. Kor. Inst. Met. & Mater., Vol. 44, No. 5, pp. 350-358, 3, 2006
12. Sung-Mo Hong, Min-Ku Lee, Gwang-Ho Kim, Chang-Kyu Rhee,
An analysis on fatigue fracture of nuclear pump impeller alloys
by ultrasonic vibratory cavitation erosion,
J. Kor. Inst. Surf. Eng., Vol. 39, No. 1, pp. 35-42, 2, 2006
13. Min-Ku Lee, Kyeong-Ho Kim, Gwang-Ho Kim, Whung-Whoe Kim,
Evaluation of the service time under the moisture erosion of the flame-hardened
and Stellite-brazed last stage rotor blades in low pressure nuclear steam turbine,
J. Kor. Inst. Met. & Mater., Vol. 43, No. 6, pp. 455-460, 12, 2005
14. Gwang-Ho Kim, Min-Ku Lee, Kyeong-Ho Kim, Whung-Whoe Kim, Gil-Mu Kim,
Deformation behavior of flame-hardened surface layer of 12Cr steel
by supersonic water drop impacts,
J. Kor. Inst. Met. & Mater., Vol. 43, No. 1, pp. 23-30, 2, 2005
15. M. K. Lee, S. M. Hong, G. H. Kim, K. H. Kim, W. W. Kim,
Characterization of the microstructure and the wear resistance
of the flame-quenched Cu-8.8Al-4.5Ni-4.5Fe alloy,
J. Kor. Soc. Heat Treat., Vol. 17, No. 6, pp. 1-10, 12, 2004
16. Sung-Mo Hong, Min-Ku Lee, Gwang-Ho Kim, Kyeong-Ho Kim, Whung-Whoe Kim, Sun-Ig Hong,
Improvement of the resistance to cavitation erosion by the formation
of ?’ martensite in flame-quenched Cu-9Al-4.5Ni-4.5Fe alloys,
J. Kor. Inst. Surf. Eng., Vol. 37, No. 4, pp. 234-241, 8, 2004
17. M. K. Lee, G. H. Kim, K. H. Kim, W. W. Kim,
Behavior of the residual stress on the surfaces of 12Cr steels generated by flame hardening process,
J. Kor. Inst. Surf. Eng., Vol. 37, No. 4, pp. 226-233, 8, 2004
18. M. K. Lee, S. M. Hong, G. H. Kim, K. H. Kim, W. W. Kim,
Structural properties in flame quenched Cu-9Al-4.5Ni-4.5Fe alloy,
Met. & Mater. Inter., Vol. 10, No. 4,, pp. 313-319, 8, 2004
19. M. K. Lee, G. H. Kim, K. H. Kim, W. W. Kim,
Control of surface hardnesses, hardening depths, and residual stresses of low carbon 12Cr steel
by flame hardening,
Surf. Coat. Tech., Vol. 184, pp. 239-246, 3, 2004
20. Min-Ku Lee, Gwang-Ho Kim, Kyeong-Ho Kim, Whung-Whoe Kim,
Thermal cycle control and hardening characterization of 12Cr steel used
as steam turbine blade material by flame surface treatment,
J. Kor. Inst. Met. & Mater., Vol. 41, No. 11, pp. 1-7, 11, 2003
List of patent
1. Min-Ku Lee, Gwang-Ho Kim, Whung-Whoe Kim, Surface hardening method for carbon steels by using flame hardening process, Korea Patent, 10-2004-0042240, 6, 2004
List of Submitted papers
1. Ick-Soo Kim, Gwang-Ho Kim, Su-Min Lee, Joo-Yong Kim, Yoshimi Watanabe, Hae-Ryong Jung, Chang-Yong Kang,
Effects of tempering and Co on the precipitation of Laves phase and mechanical properties in Fe-10Cr ferritic heat-resistant steel,
J. Nucl. Mater., 2, 2008 (Submitted)
2. Jung G. Lee, J. K. Lee, G. H. Kim, M. K. Lee , C. K. Rhee,
Low temperature brazing between Ti and Cu using a Zr-based amorphous filler,
Acta Mater., 1, 2008 (Submitted)
AFTER...
Japan Atomic Energy Agency