Embedded Files
Training and Qualifications
Training and Qualifications
Complete at least two (2) training sessions with staff and demonstrate safe and competent operation of the tool to receive independent access (Prime time only: 9-5 weekdays.)
Staff may require (or users may request) additional training before access is granted.
Additional training for advanced techniques is available upon request.
24/7 access may be granted at staff's discretion after completing at least 4 hours of independent use without incident.
Staff may require refresher trainings after a period of disuse (e.g. 6 months) or if a user has demonstrated a lack of competency or understanding on the tool.
General Expectations
General Expectations
When in doubt, ask for help.
Clean up after yourself.
Reserve the tool in NEMO, then enable when you start and disable when you finish.
Report problems through NEMO.
Sample Handling
Sample Handling
Always wear gloves when handling anything that goes inside the SEM (including but not limited to: samples, stubs, and sample holders.)
Do not overtighten set screws (or remove them, unless necessary.)
Ensure samples are secure on their stubs or holders.
Sample Loading
Sample Loading
Use an appropriate sample holder
Carefully measure and input the specimen and stub dimensions.
Use the chamberscope or 3D model to help avoid collisions.
Do not overtighten set screws (or remove them, unless necessary.)
Data Management
Data Management
Upload your images or email them to yourself.
Respect other users if they are operating the SEM when you come to retrieve your images.
Page updated
Report abuse