Enter vehicle rotation
To enter the Inspections module , follow these steps:
Step 1: Press Menu > Operation Work > Simple Vehicle Inspections
Step 2: In the to be inspected section of the tab , look for the license plate of the vehicle to be inspected.
Step 3: Press the card of the searched vehicle.
Step 4: In the vehicle diagram, select a position. (Tires that have a colored dot are the ones that have an inspection to be carried out).
Step 5: Once you select a tire from a position, example pos 1, this will display a list of options to make to the tire, select Vehicle rotation.
Note: You must pair the Calliper R2 to perform bluetooth inspection.
Perform rotation in vehicle
To perform the Rotation in a vehicle, follow these steps:
Step 1: Once the Vehicle Rotation option is selected, you will find the information about the selected tire.
Step 2: In the rotation section, the starting position appears locked showing the position of the selected tire, in the final position field, enter the position to which you want to rotate the position , Example: Starting position 2 - Final position 4.
Step 3: When selecting the final position, (example: 4), a new row with initial and final position will be enabled, following the previous example, in the initial position, the field would show position 4 and the final one is enabled to select the position 2 or another in the vehicle.
Note 1: The rotations should be allowed to be even, Example, if the start position is 1 and the selected end position is 3; In the new row the initial position would show pos 3 and if in the pos field. final select pos 6, in the next row that is enabled, the initial position would be pos 6 and in the final one you can choose pos 1. In this way the rotations are even.
Note 2: You can rotate a spare tire to the vehicle.
Perform tire inspection
To carry out the inspection within Vehicle Rotation, follow these steps:
Step 1: Once the rotations have been completed, you will see an inspection icon next to the final position field, this is enabled and turns blue when the final position is selected, press it to enter the inspection section.
Step 2: In the inspection section, keep in mind that: The inspection will be carried out on the tire of the selected initial position.
Step 3: Enter tire depths and PSI pressure. ( new features can be included in the tire).
Step 4: Press the "Save" button so that the inspection is recorded.
Step 5: Once the information has been saved , you will return to the rotations section to continue with the next tire. Perform this action with each of the initial positions that you have registered.
Step 6: Once you have carried out all the inspections, the save button will be enabled, press it and you will see in the vehicle diagram, the tires rotated and with the green inspection stripe.
Delete inspection
To delete an inspection , follow these steps:
Step 1: Once the inspection is completed, you will see a "delete" icon (X) next to the inspection icon, this is enabled and turns dark gray when you have an inspection registered, press it to delete the inspection.
Step 2: In the displayed modal, press accept to delete the inspection carried out.
Step 3: In the rotation module, the inspections that have been recorded are restarted.