Embedded Files
Enter inspection
To enter the Inspections module , follow these steps:
Step 1: Press Menu > Operation Work > Inspection
Step 2: In the to be inspected section of the tab , look for the license plate of the vehicle to be inspected.
Step 3: Press the card of the searched vehicle
Step 4: In the vehicle diagram, select a position. (Tires that have a colored dot are the ones that have an inspection to be carried out).
Step 5: Once you select a tire from a position, example pos 1, a list of options to be performed on the tire will be displayed, select Inspection.
Note: You must pair the Calliper R2 to perform bluetooth inspection .
Perform inspection
To carry out the inspection follow these steps:
Step 1: Once the inspection option is selected , you will find the information about the tire selected in the position.
Step 2: If the tire is not retreaded or retreaded, continue with the depth section.
Step 3: In depths enter the information of the exterior-center-interior depth
Step 4: Then enter the PSI pressure and a support number if available (optional).
Step 5: Once the fields are completed, press the save button.
Step 6: In the vehicle diagram you will see how the tire in the position where you carried out the inspection changes its status and has a green stripe at the bottom.
Perform inspection - Renewed tire
Para registrar la inspección sigue estos pasos:
To record the inspection follow these steps:
Step 1: Once the inspection option is selected , you will find the information about the tire selected in the position.
Step 2: If the tire is retread , press yes in the retread section.
Step 3: New fields will be enabled to fill out (Brand/manufacturer, Band/floor)
Step 4: Enter the requested information and then enter the tire depths.
Step 5: Then enter the PSI pressure and a support number if available (optional).
Step 6: Once the fields are completed, press the save button.
Step 7: In the vehicle diagram you will see how the tire in the position where you performed the inspection changes its status and has a green stripe at the bottom.
Perform inspection - Renewed tire - Re-recorded
To record the inspection follow these steps:
Step 1: Once the inspection option is selected , you will find the information about the tire selected in the position.
Step 2: If the tire is retread , press yes in the retread section.
Step 3: New fields will be enabled to fill out (Brand/manufacturer, Band/floor) and enter the requested information.
Step 4: In the re-recording field, select Yes (this information will be pending so that the web analyst can finish recording the data).
Step 5: Then enter the PSI pressure and a support number if available (optional).
Step 6: Once the fields are completed, press the save button.
Step 7: In the vehicle diagram you will see how the tire in the position where you performed the inspection changes its status and has a green stripe at the bottom.
Perform simple inspection - Not the same tire - existing tire
This scenario occurs when the inspector is in front of the vehicle, is going to inspect a position, and realizes that the tire does not match what is shown in the app.
To register and inspect the tire to be registered, follow these steps.
Step 1: Once the inspection option is selected , you will find the information about the tire selected in the position.
Step 2: Press the "Not the same tire" option, on the "Search tire" button that appears, press it and you will find a hot number search engine to locate the tire that is mounted on the vehicle.
Case 1: If the tire consulted in the search engine by heat number exists in the database, it will be displayed with an information card , which must be selected and this will be loaded into the inspection module .
Note: This creation of the tire becomes a pending so that the web analyst can verify and approve the creation of the tire.
Step 3: Once the not the same tire step is completed, select whether it is renewed or re-recorded.
Step 4: In depths enter the outside-center-inside depth information.
Step 5: Then enter the PSI pressure and a support number if available (optional).
Step 6: Once the fields are completed, press the save button.
Step 7: In the vehicle diagram you will see how the tire in the position where you performed the inspection changes its status and has a Blue Dot, which indicates that it is in pending status.
Perform simple inspection - Not the same tire - non-existent tire
This scenario occurs when the inspector is in front of the vehicle, is going to inspect a position, and realizes that the tire does not match what is shown in the app.
To register and inspect the tire to be registered, follow these steps.
Step 1: Press the "Not the same tire" option, on the "Search tire" button that appears, press it and you will find a hot number search engine to locate the tire that is mounted on the vehicle.
Case 1: If the tire consulted in the search engine by heat number exists in the database, it will be displayed with an information card , which must be selected and this will be loaded into the inspection module .
Case 2: If the tire does not exist in the database, it must be registered from the "Register tire" button. Once this field is selected, a tire registration form will be enabled, which must be filled out and saved so that the information is loaded into the inspection module .
Note: This creation of the tire becomes a pending so that the web analyst can verify and approve the creation of the tire.
Step 3: Once the not the same tire step is completed, select whether it is renewed or re-recorded.
Step 4: In depths enter the outside-center-inside depth information.
Step 5: Then enter the PSI pressure and a support number if available (optional).
Step 6: Once the fields are completed, press the save button.
Step 7: In the vehicle diagram you will see how the tire in the position where you performed the inspection changes its status and has a Blue Dot, which indicates that it is in pending status.
Delete registered tire from "Not the same tire"
To delete a registered tire from the inspection module, follow these steps:
Step 1: Once the tire is registered from the "Not the same tire" option, press the switch to turn off the option.
Step 2: When you press it, an informational mode will appear, asking if you want to delete the newly registered tire, press accept and the tire will be deleted from the inspection.
Page updated
Report abuse