Enter dismantling
To enter the Inspections module , follow these steps:
Step 1: Press Menu > Operation Work > Simple Vehicle Inspections
Step 2: In the to be inspected section of the tab , look for the license plate of the vehicle to be inspected.
Step 3: Press the card of the searched vehicle
Step 4: In the vehicle diagram, select a position. (Tires that have a colored dot are the ones that have an inspection to be carried out).
Step 5: Once you select a tire from a position, example pos 1, this will display a list of options to perform on the tire, select Remove.
Carry out disassembly
To remove a tire, follow these steps:
Step 1: Once the Dismantle option is selected, you will find in the module a warehouse field, in which when selected, it will show you the warehouses available to send the tire to be dismantled.
Step 2: Once you have selected the warehouse where the tire will be sent, enter the depths, Exterior, Center and Interior.
Step 3: Enter the PSI pressure and a support (optional)
Step 4: The Save button will be enabled, press it so that the disassembly is completed, you can verify it in the vehicle diagram, seeing the empty position.