Disposal

Enter disposal

To enter the Inspections module , follow these steps:

Step 1: Press Menu > Operation Work > Simple Vehicle Inspections

Step 2: In the section of the tab to be inspected, look for the license plate of the vehicle to be inspecte.

Step 3: Press the card of the searched vehicle.

Step 4: In the vehicle diagram, select a position. (Tires that have a colored dot are the ones that have an inspection to be carried out).

Step 5: Once you select a tire from a position, example pos 1, this will display a list of options to make to the tire, select Waste.

Note: You must pair the Calliper R2 to perform bluetooth inspection.

Make waste

To dispose of a tire, follow these steps:

Step 1: Once the Waste option is selected, you will find the tire information.

Step 2: Enter the current tire depths.

Step 3: Enter the PSI pressure and a support (optional) and the DOT.

Step 4: In the end-of-life reason section, select the warehouse where the scrapped tire will be sent and then enter the section, reason, and cause of the scrap.

Step 5: Enter the evidence corresponding to the waste, remember that you can enter a maximum of 5 images.

Step 6: The Save button will be enabled, press it so that the waste is recorded, you can verify it in the vehicle diagram, seeing the empty position.

Page updated

Report abuse