Enter simple vehicle inspections
To enter the Inspections module , follow these steps:
Step 1: Press Menu > Operation Work > Simple Vehicle Inspections
Step 2: In the to be inspected section of the tab , look for the license plate of the vehicle to be inspected.
Step 3: Press the card of the searched vehicle
Step 4: In the vehicle diagram, select a position. (Tires that have a colored dot are the ones that have an inspection to be carried out).
Step 5: Once you select a tire from a position, example pos 1, a list of options to be performed on the tire will be displayed, select Inspection.
Note: You must pair the Calliper R2 to perform bluetooth inspection .
Cross inspection module
Cross inspection module
To enter the Inspections module, follow these steps:
Press Menu > Operation work > Simple vehicle inspections
Work offline: This functionality is transversal in inspections and its function is to give the inspector the opportunity to register and carry out the inspection of the vehicle in scenarios where the connection is null or does not exist.
Search engine: This search engine is transversal and in it you can search for the license plate of the vehicle to be inspected.
Tabs : In the Inspections section, you will find three navigation tabs (To be inspected - Re-inspection-Inspected).
To be inspected: These are the vehicles that have a pending inspection to be carried out.
Inspected: These are the vehicles for which the scheduled inspection has already been carried out.
card : This card shows the information of the searched vehicle and is direct access to it for inspection.
Vehicle schematic module
When selecting a vehicle card, this module is presented with the following elements:
Tabs : At the top there is a tab (Activities-Jobs).
Activities: These are all the activities or inspections that are carried out on the tire.
Work: These are the work that is carried out on the vehicle such as an alignment or a torque .
Vehicle Information: This card displays vehicle information.
Add info: In this section you enter the measurement of the inspected vehicle.
States: Here you can see the conventions of the tires and axles that the vehicle diagram has.
Diagram: This section shows the vehicle with the respective tires mounted and their inspection status.