Enter inspections by PSI
To enter the Inspections module , follow these steps:
Step 1: Press Menu > Operation Work > Simple Vehicle Inspections
Step 2: In the to be inspected section of the tab , look for the license plate of the vehicle to be inspected.
Step 3: Press the card of the searched vehicle
Step 4: In the vehicle diagram, select a position. (Tires that have a colored dot are the ones that have an inspection to be carried out).
Step 5: Once you select a tire from a position, example pos 1, a list of options to be performed on the tire will be displayed, select Inspection by PSI.
Note: You must pair the Calliper R2 to perform bluetooth inspection .
Perform Inspection by PSI
To carry out the inspection follow these steps:
Step 1: Once the PSI inspection option is selected , you will find the information about the tire selected in the position.
Step 2 : Enter the PSI pressure and a support number if available (optional).
Step 3: Once the fields are completed, press the save button.
Step 4: In the vehicle diagram you will see how the tire in the position where you performed the inspection changes its status and has a green stripe at the bottom.