Metal Shop
POWER TOOLS - FLOOR MODELS
Planishing Hammer
Chicago Pneumatic
12" Drill Press - 9-Speed
10" Table Saw
Delta model / takes 10" blades
Usually this device is set up with a 72-tooth metal cutting blade
9" Band Saw
Harbor Freight / takes 59-1/4” blades from 1/8" to 3/8" wide
Must order 1/2" wide heat resistant "bimetal blades" to cut anything thicker than sheet metal
Do NOT use the standard blades from Harbor Freight. They are "sheet metal blades" and will break frequently if used to cut thicker metal.
HOT METAL TOOLS
MIG Welder w/ Argon Tank
Plasma Cutter
POWER TOOLS - BENCH TOP
Metal Cutoff Saw
Chicago Electric - 14" fiber cutoff blade
Ridgid 16" Variable Speed Scroll Saw
6" Bench Grinder
3" x 21" Bench Sander w/ 6" Disk
Dremel Tools & Accessories
Heat Guns
AIR TOOLS
1HP / 4 Gallon Senco Air Compressor
Rivet Gun Kits (qty 2)
Blind Rivet Gun
Disk Sander
Wheel Sander
NONSTANDARD HAND TOOLS
We have all of the most common hand tools. The tools listed below are atypical and/or only seen in metal shops.
Rivet Gun (for blind/pop rivets)
Rivet Squeezer / Dimpler Kit
Microbit Countersink Kit
12-ton Hydraulic Press
Right/Left/Straight Aviation Snips
14" Straight Aluminum Shears
Tap & Die Set - metric
Tap & Die Set - standard
Deburring Tools
9-piece Roll Pin Punch/Alignment Set - 1/16" to 5/16"
28-piece Center Punch/Transfer Set - 3/32" to 17/32"
5" spring loaded automatic center punch
Aviation Needle File Set
Gauges
Rivet Length Gauges
Rivet Shop Head Gauges
Thread Gauges
Nut & Bolt Gauges
Spark Plug Gap Gauges
Thickness Gauges
Cleco Pliers
Cleco Straight Fasteners - 3/32", 1/8", 5/32", 3/16"
Cleco Side Fasteners - 1/2", 1"
Red Box 737 Rivet Gun Kits
one kit w/ 2x rivet gun
one kit w/ 3x rivet gun
teasing trigger and 1/8" aluminum rivet capacity
Uses mandrels w/ .401" shanks
3-1/2" straight rivet sets (3/32", 1/8", 5/32", 3/16")
1" flush face set
Includes #670 and #638 bucking bars
Rivet Squeezer / Dimpler Set
"Klassic Air Tool" Rivet Squeezer / Dimpler Set #KTC152
for use w/ solid rivets
w/ 1.5" and 3" interchangeable yokes
uses sets (aka bits) w/ .187" shank
includes 4 Button Head rivet squeezer sets
- 3/32, 1/8, 5/32, 3/16
includes 7 Flush rivet squeezer sets
- 1/8", 3/16", 1/4", 5/16" 3/8", 7/16", 1/2" body length
includes 4 Dimple and Die Sets
- 3/32", 1/8", 5/32", and 3/16" sizes (male and female)
Microbit Countersink Cage w/ bits
Microbit Countersink Cage
Max Cutter Body Dia: 5/8"
Shaft Travel: 9/32"
Spindle Thread: 1/4-28
Max RPM: 3,000
Outside Skirt Dia: 1"
Overall Length: 3-9/16"
Nylon Foot-Piece to prevent marring of surface
HSS Cutting Bits - 100 degree cutting angle and 7/16" bodies
w/ #10, #21, #30, #40 cutter bits
Bolt, Nut, Rivet & Thread Gauges
US Standard and Metric
thread gauges for USS, SAE, National Fine & Metric
UNIBIT Step Drill
The UNIBIT Step Drill uses a unique single flute design to drill perfectly round holes in thin materials quickly and with less effort than any other bit on the market today. Once the desired hole diameter is obtained, the hole is automatically deburred by the cutting edge of the next larger step. 1/8" max material thickness
UNIBIT #1 drills 13 holes in 1/32" increments from 1/8" through 1/2" and has a shank size of 1/4".
UNIBIT #2 drills 6 sizes of holes from 3/16" through 1/2" and has a 3/8" step thickness with a 1/4" shank.
UNIBIT #3 drills 9 sizes of holes from 1/4" to 3/4" and has a step thickness of 1/8" with a 3/8" shank.
UNIBIT #4 drills 12 sizes of holes from 3/16" to 7/8" and has a step thickness of 1/8" with a 3/8" shank.
UNIBIT #5 drills 10 sizes of holes from 1/4" to 1-3/8" and has a step thickness of 1/8" with a 3/8" shank.
5X Magnifying Lamp on Stand
Model M-2021
Uses ballast - FG-1E / 4-40W
Uses fuse - FO. 5AL 125V
Uses bulb - CH-22W