International Journal
[107] Xuan-Mung, N., Pham, D. B., Duong, X. Q., Van, M., Sareh, S., Shojaei, K., ... & Khayyam, H. (2023). Intelligent Robust Disturbance Rejection Control of a Ballbot Drive Micromobility Vehicle. IEEE Transactions on Intelligent Vehicles.
[106] Hoang, Q. D., Woo, S. H., Lee, S. G., Le, A. T., Pham, D. T., & Nguyen, V. T. (2022). Robust control with a novel 6-DOF dynamic model of indoor bridge crane for suppressing vertical vibration. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(5), 1-12.
[105] Rosas-Cervantes, V., Hoang, Q. D., Woo, S. H., & Lee, S. G. (2022). Mobile robot 3D trajectory estimation on a multilevel surface with multimodal fusion of 2D camera features and a 3D light detection and ranging point cloud. International Journal of Advanced Robotic Systems, 19(2), 17298806221089198.
[104] Xuan, H. L., Hoang, Q. D., Lee, S. G., Xuan, D. P., Viet, H. T., Van, M. P., ... & Nguyen, D. A. (2022). Adaptive hierarchical sliding mode control using an artificial neural network for a ballbot system with uncertainties. Journal of Mechanical Science and Technology, 36(2), 947-958.
[103] Weon, I. S., & Woo, S. H. (2021). Lane Departure Detecting with Classification of Roadway Based on Bezier Curve Fitting Using DGPS/GIS. Tehnički vjesnik, 28(1), 248-255.
[102] Kim, B.-H., Dong, H. Q., Ryu, J.-K., Lee, W.-H., Gu, P.-M., Lee, S.-G. (2021). Integral Sliding-Mode Control for an Interlocking Unmanned Underwater and Surface Vehicle System Connected by a Cable. Asia-pacific Journal of Convergent Research Interchange (APJCRI), 7(10), 11-24.
[101] Rosas-Cervantes, V. A., Hoang, Q. D., Lee, S. G., & Choi, J. H. (2021). Multi-Robot 2.5 D Localization and Mapping Using a Monte Carlo Algorithm on a Multi-Level Surface. Sensors, 21(13), 4588.
[100] Do, V. T., Lee, S. G., & Van, M. (2021). Adaptive hierarchical sliding mode control for full nonlinear dynamics of uncertain ridable ballbots under input saturation. International Journal of Robust and Nonlinear Control, 31(8), 2882-2904.
[99] Hoang, Q. D., Park, J., & Lee, S. G. (2021). Combined feedback linearization and sliding mode control for vibration suppression of a robotic excavator on an elastic foundation. Journal of Vibration and Control, 27(3-4), 251-263.
[98] Hoang, Q. D., Park, J. G., Lee, S. G., Ryu, J. K., & Rosas-Cervantes, V. A. (2020). Aggregated Hierarchical Sliding Mode Control for Vibration Suppression of an Excavator on an Elastic Foundation. International Journal of Precision Engineering and Manufacturing, 21(12), 2263-2275.
[97] Nguyen-Van, S., Gwak, K. W., Nguyen, D. H., Lee, S. G., & Kang, B. H. (2020). A novel modified analytical method and finite element method for vibration analysis of cable-driven parallel robots. Journal of Mechanical Science and Technology, 34(9), 3575-3586.
[96] Rosas-Cervantes, V., & Lee, S. G. (2020). 3D localization of a mobile robot by using Monte Carlo algorithm and 2D features of 3D point cloud. International Journal of Control, Automation and Systems, 18(11), 2955-2965.
[95] Do, V. T., & Lee, S. G. (2020). Neural integral backstepping hierarchical sliding mode control for a ridable ballbot under uncertainties and input saturation. IEEE Transactions on Systems, Man, and Cybernetics: Systems, 51(11), 7214-7227.
[94] Pham, D. B., Weon, I. S., & Lee, S. G. (2020). Partial feedback linearization double-loop control for a pseudo-2D ridable ballbot. International Journal of Control, Automation and Systems, 18(5), 1310-1323.
[93] Weon, I. S., Lee, S. G., & Ryu, J. K. (2020). Object Recognition based interpolation with 3d lidar and vision for autonomous driving of an intelligent vehicle. IEEE Access, 8, 65599-65608.
[92] Hoang, Q. D., Rosas-Cervantes, V. A., Lee, S. G., Weon, I. S., Choi, J. H., & Kwon, Y. H. (2020). Robust finite-time convergence control mechanism for high-precision tracking in a hybrid fluid power actuator. IEEE Access, 8, 196775-196789.
[91] Ba, P. D., Dong, H. Q., Huong, N. L., & Lee, S. G. (2019, October). Hierarchical Sliding Mode Control for a 3D Ballbot that is a Class of Second-order Under-actuated System. In 2019 19th International Conference on Control, Automation and Systems (ICCAS) (pp. 641-645). IEEE.
[90] Do, V. T., Lee, S. G., & Gwak, K. W. (2019). Passivity-based nonlinear control for a ballbot to balance and transfer. International Journal of Control, Automation and Systems, 17(11), 2929-2939.
[89] Yun, S., Gwak, K. W., Lee, S. G., & Kim, C. W. (2019). Two-DOF anthropomorphic test devices reproducing human rider motion intent for the evaluation of dynamic stability and safety of unicycle robots. International Journal of Control, Automation and Systems, 17(6), 1569-1578.
[88] Pham, D. B., Kim, J., Lee, S. G., & Gwak, K. W. (2019). Double-loop control with hierarchical sliding mode and proportional integral loop for 2D ridable ballbot. International Journal of Precision Engineering and Manufacturing, 20(9), 1519-1532.
[87] Ihn-Sik, W., Soon-Geul, L., Eom, K., Choi, H., Won, K., Won, S., & Jung, K. K. (2019). Lane departure algorithm based on classification roadway type using DGPS/GIS....... International Journal of Smart Home, 13(1), 1-6.
[86] Weon, I. S., & Lee, S. G. (2019). Environment recognition based on multi-sensor fusion for autonomous driving vehicles. Journal of Institute of Control, Robotics and Systems, 25(2), 125-131.
[85] Hoang, Q. D., Lee, S. G., & Dugarjav, B. (2019). Super‐twisting observer‐based integral sliding mode control for tracking the rapid acceleration of a piston in a hybrid electro‐hydraulic and pneumatic system. Asian Journal of Control, 21(1), 483-498.
[84] Pham, D. B., & Lee, S. G. (2018). Aggregated hierarchical sliding mode control for a spatial ridable ballbot. International Journal of Precision Engineering and Manufacturing, 19(9), 1291-1302.
[83] Weon, I. S., & Lee, S. G. (2018). Intelligent robotic walker with actively controlled human interaction. ETRI Journal, 40(4), 522-530.
[82] Le, A. T., & Lee, S. G. (2017). 3D cooperative control of tower cranes using robust adaptive techniques. Journal of the Franklin Institute, 354(18), 8333-8357.
[81] Shin, K. C., & Lee, S. G. (2017). The 16th International Conference on Control, Automation, and Systems (ICCAS 2016)[Conference Reports]. IEEE Control Systems Magazine, 37(3), 98-100.
[80] Dugarjav, B., Lee, S. G., Quang, T. B., Gwak, K. W., & Lee, B. (2017). Adaptive online cell decomposition with a laser range finder in unknown non-rectilinear environments. International Journal of Precision Engineering and Manufacturing, 18(4), 487-495.
[79] Lee, D., Lee, S. G., & Kim, S. (2017). Composite phase-change material mold for cost-effective production of free-form concrete panels. Journal of Construction Engineering and Management, 143(6), 04017012.
[78] Dugarjav, B., Lee, S. G., Quang, T. B., Gwak, K. W., & Lee, B. (2017). Adaptive online cell decomposition with a laser range finder in unknown non-rectilinear environments. International Journal of Precision Engineering and Manufacturing, 18(4), 487-495.
[77] Lee, S. G. (2016). Nonlinear feedback control of underactuated mechanical systems. In Nonlinear Systems-Design, Analysis, Estimation and Control. IntechOpen.
[76] Moon, S. C., Lee, S. G., & Weon, I. S. (2016). Evacuative Path Design due to the Optimal Cost-Function Arithmetic at Compartment Fire. International Journal of Smart Home, 10(9), 69-82.
[75] Weon, I. S., Lee, S. G., & Moon, S. C. (2016). Position and vision information of relative vehicle’s using Procrustes analysis method for position correction. International Journal of Future Generation Communication and Networking, 9(10), 51-62.
[74] Tuan, L. A., Cuong, H. M., Lee, S. G., Nho, L. C., & Moon, K. (2016). Nonlinear feedback control of container crane mounted on elastic foundation with the flexibility of suspended cable. Journal of Vibration and Control, 22(13), 3067-3078.
[73] Moon, S. C., Lee, S. G., & Kim, D. H. (2015). Classification of roadway type based on roadway characteristics using RCCC. International Journal of Applied Engineering Research, 10(11), 27587-27592.
[72] Tuan, L. A., Lee, S. G., Nho, L. C., & Cuong, H. M. (2015). Robust controls for ship-mounted container cranes with viscoelastic foundation and flexible hoisting cable. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 229(7), 662-674.
[71] Moon, S. C., Lee, S. G., & Kim, D. H. (2015). Classification of roadway type based on roadway characteristics using RCCC. International Journal of Applied Engineering Research, 10(11), 27587-27592.
[70] Joo, D. N., Moon, S. C., & Lee, S. G. (2015). Determination of driving states using the driving characteristics index. Journal of Institute of control, Robotics and Systems, 21(3), 210-216.
[69] Gwak, K. W., Kim, H. D., Lee, S. G., Park, S., & Kim, C. W. (2015). Sliding mode control for the Frank–Starling response of a piston pump mock ventricle. Journal of Process Control, 25, 70-77.
[68] Joo, D. N., Moon, S. C., Kim, M. W., Lee, S. G., & Tan, B. Q. (2014, October). A study about curve extraction and lane departure determination of linear curved road. In 2014 14th International Conference on Control, Automation and Systems (ICCAS 2014) (pp. 720-725). IEEE.
[67] Kim, M. W., Moon, S. C., Joo, D. N., & Lee, S. G. (2014). Matching GIS Lane Data with Vehicle position using camera image. Transactions of the Korean society of automotive engineers, 22(7), 40-47.
[66] Choi, J. H., Ko, D. H., Kim, H., & Lee, S. G. (2014, October). Design of body gesture recognition system for regularity and repeatability gestures. In 2014 14th International Conference on Control, Automation and Systems (ICCAS 2014) (pp. 449-453). IEEE.
[65] Tuan, L. A., Lee, S. G., Ko, D. H., & Nho, L. C. (2014). Combined control with sliding mode and partial feedback linearization for 3D overhead cranes. International Journal of Robust and Nonlinear Control, 24(18), 3372-3386.
[64] Kim, M. W., Moon, S. C., Joo, D. N., & Lee, S. G. (2014). Matching GIS Lane Data with Vehicle position using camera image. Transactions of the Korean society of automotive engineers, 22(7), 40-47.
[63] Lee, C. H., Kim, G. H., Kim, J. J., Kim, B. S., & Lee, S. G. (2014). A Real-time and Off-line Localization Algorithm for an Inpipe Robot by Detecting Elbows. Journal of Institute of Control, Robotics and Systems, 20(10), 1044-1050.
[62] Moon, S., Lee, S. G., Kim, M., & Joo, D. (2014). Assessment and reliability validation of lane departure assistance system based on DGPS-GIS using camera vision. Transactions of the Korean Society of Automotive Engineers, 22(6), 49-58.
[61] Hoang, N. Q., Lee, S. G., Kim, J. J., & Kim, B. S. (2014). Simple energy-based controller for a class of underactuated mechanical systems. International journal of precision engineering and manufacturing, 15(8), 1529-1536.
[60] Hoang, N. Q., Lee, S. G., Kim, H., & Moon, S. C. (2014). Trajectory planning for overhead crane by trolley acceleration shaping. Journal of Mechanical Science and Technology, 28(7), 2879-2888.
[59] Lee, G., Ohnuma, T., Chong, N. Y., & Lee, S. G. (2013). Walking intent-based movement control for JAIST active robotic walker. IEEE Transactions on Systems, Man, and Cybernetics: Systems, 44(5), 665-672.
[58] Tuan, L. A., Kim, J. J., Lee, S. G., Lim, T. G., & Nho, L. C. (2014). Second-order sliding mode control of a 3D overhead crane with uncertain system parameters. International journal of precision engineering and manufacturing, 15(5), 811-819.
[57] Moon, B. J., Jung, H. G., Lee, S. G., & Kim, D. H. (2014). Parallel model based fault detection algorithm for electronic parking brake system. International Journal of Automotive Technology, 15(3), 483-494.
[56] Le, T. A., Lee, S. G., & Moon, S. C. (2014). Partial feedback linearization and sliding mode techniques for 2D crane control. Transactions of the Institute of Measurement and Control, 36(1), 78-87.
[55] Dugarjav, B., Lee, S. G., Kim, D., Kim, J. H., & Chong, N. Y. (2013). Scan matching online cell decomposition for coverage path planning in an unknown environment. International journal of precision engineering and manufacturing, 14(9), 1551-1558.
[54] Tuan, L. A., Lee, S. G., Nho, L. C., & Kim, D. H. (2013). Model reference adaptive sliding mode control for three dimensional overhead cranes. International Journal of Precision Engineering and Manufacturing, 14(8), 1329-1338.
[53] Batsaikhan, D., Janchiv, A., & Lee, S. G. (2013). Sensor-based incremental boustrophedon decomposition for coverage path planning of a mobile robot. In Intelligent Autonomous Systems 12 (pp. 621-628). Springer, Berlin, Heidelberg.
[52] Tuan, L. A., Lee, S. G., Dang, V. H., Moon, S., & Kim, B. (2013). Partial feedback linearization control of a three-dimensional overhead crane. International Journal of Control, Automation and Systems, 11(4), 718-727.
[51] Hoang, N. Q., & Lee, S. G. (2013). Energy-based approach for controller design of overhead cranes: A comparative study. In Applied Mechanics and Materials (Vol. 365, pp. 784-787). Trans Tech Publications Ltd.
[50] Tuan, L. A., & Lee, S. G. (2013). Sliding mode controls of double-pendulum crane systems. Journal of Mechanical Science and Technology, 27(6), 1863-1873.
[49] Kang, S. H., Kim, Y. H., Min, B. C., Lee, S. G., An, J., & Kim, D. H. (2013). Smart floor with learning capability for mobile robot system. In Recent Advances in Robotics and Automation (pp. 205-215). Springer, Berlin, Heidelberg.
[48] Le, T. A., Dang, V. H., Ko, D. H., An, T. N., & Lee, S. G. (2013). Nonlinear controls of a rotating tower crane in conjunction with trolley motion. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 227(5), 451-460.
[47] Janchiv, A., Batsaikhan, D., Kim, B., Lee, W. G., & Lee, S. G. (2013). Time-efficient and complete coverage path planning based on flow networks for multi-robots. International Journal of Control, Automation and Systems, 11(2), 369-376.
[46] Tuan, L. A., Moon, S. C., Lee, W. G., & Lee, S. G. (2013). Adaptive sliding mode control of overhead cranes with varying cable length. Journal of Mechanical Science and Technology, 27(3), 885-893.
[45] Moon, S. C., Kim, M. W., Joo, D. N., & Lee, S. G. (2013). GPS-RTK solution using WAVE communication for vehicle. In 20th ITS World Congress.
[44] Tuan, L. A., Lee, S. G., Dang, V. H., Moon, S., & Kim, B. (2013). Partial feedback linearization control of a three-dimensional overhead crane. International Journal of Control, Automation and Systems, 11(4), 718-727.
[43] Moon, S. C., Kim, J. J., Nam, K. M., Kim, B. S., & Lee, S. G. (2012). Motion Control Algorithm Expanding Arithmetic Operation for Low-Cost Microprocessor. Journal of Institute of Control, Robotics and Systems, 18(12), 1079-1085.
[42] Moon, S., & LEE, S. G. (2012). Revision of vocabulary standard for robots and robotic devices in ISO. In Adaptive Mobile Robotics (pp. 849-854).
[41] Kim, K., Kim, J. A., Lee, S. G., & Lee, W. G. (2012). Seeing the electroporative uptake of cell-membrane impermeable fluorescent molecules and nanoparticles. Nanoscale, 4(16), 5051-5058.
[40] Moon, S. C., Lee, S. G., Kim, J. J., & Kim, B. S. (2012). Detecting lane departure based on GIS using DGPS. Transactions of the Korean Society of Automotive Engineers, 20(4), 16-24.
[39] Le, T. A., Kim, G. H., Kim, M. Y., & Lee, S. G. (2012). Partial feedback linearization control of overhead cranes with varying cable lengths. International Journal of Precision Engineering and Manufacturing, 13(4), 501-507.
[38] Lee, J. W., Jung, J. Y., Lee, S. G., & Kang, Y. T. (2011). CO2 bubble absorption enhancement in methanol-based nanofluids. International journal of refrigeration, 34(8), 1727-1733.
[37] Kim, B. S., Nam, K. M., & Lee, S. G. (2011). A study on ZMP improvement of biped walking robot using neural network and tilting. The Journal of Korea Robotics Society, 6(4), 301-307.
[36] Kim, G. H., Kim, H., Kim, B. S., & Lee, S. G. (2011). Path planning for an intelligent robot using flow networks. The Journal of Korea Robotics Society, 6(3), 255-262.
[35] Kim, M. Y., Veluvolu, K. C., & Lee, S. G. (2011). Lateral scanning linnik interferometry for large field of view and fast scanning: Wafer bump inspection. International Journal of Optomechatronics, 5(3), 271-285.
[34] Yun, H., Min, J., Bang, H., Han, D. C., Lee, S. G., & Lee, W. G. (2011). Fluorescence intensity ratio stereoscopic transform. Journal of Nanoscience and Nanotechnology, 11(7), 6377-6381.
[33] Kim, M. Y., Kim, H. W., & Lee, S. G. (2011). Array Lens and Pinhole-based Multi-Confocal Robot Vision System: Micro Bump Inspections in Wafer Level Packaging. Journal of Welding and Joining, 29(1), 29-32.
[32] Moon, S. C., Lee, C. H., & Lee, S. G. (2011, October). A study of knee brace locking timing and walking pattern detected from an FSR and knee joint angle. In 2011 11th International Conference on Control, Automation and Systems (pp. 1783-1787). IEEE.
[31] Kim, G. H., & Lee, S. G. (2011). Tip Position Control of a Flexible Cantilever based on Kalman Estimation Using an Accelerometer. Journal of the Korean Society for Precision Engineering, 28(5), 591-598.
[30] Janchiv, A., Batsaikhan, D., hwan Kim, G., & Lee, S. G. (2011, October). Complete coverage path planning for multi-robots based on. In 2011 11th International Conference on Control, Automation and Systems (pp. 824-827). IEEE.
[29] Shin, I. S., Kim, J. H., & Lee, S. G. (2010). A threshold-based thinning algorithm for a visual, automated snow-cover measurement system. International Journal of Control, Automation and Systems, 8(1), 99-106.
[28] Kim, B. S., Nam, K. M., Kim, J. J., & Lee, S. G. (2010, October). Research for gait stability of biped walking using vision. In ICCAS 2010 (pp. 1414-1418). IEEE.
[27] Ko, D. H., Kim, G. R., & Lee, S. G. (2010, October). Stable walking algorithm using tilting motion for a bipedal robot: Control of torso on 2-dimension plane of ZMP. In ICCAS 2010 (pp. 1822-1825). IEEE.
[26] Kim, J. J., Kim, B. S., Lee, J. Y., & Lee, S. G. (2010). Development of crack examination algorithm using the linearly integrated Hall sensor array. Journal of the Korean Society for Precision Engineering, 27(11), 30-36.
[25] Cha, H. Y., Bum, S. H., Kim, M. S., & Lee, S. G. (2009). Gain Parameter Determination for the Feeding Speed and Skew Controller of Media Transport System using Optimization Technique. Transactions of the Korean Society of Mechanical Engineers A, 33(6), 607-613.
[24] Park, J. H., Lee, S. G., & Rhim, S. (2009). Implementation of frequency-shaped tip reference in conjunction with learning controller for improved tip-tracking control. Journal of mechanical science and technology, 23(4), 1008-1011.
[23] Moon, S., Park, K. H., Lee, S. G., Cho, Y. J., & Ryuh, Y. (2009). Standardization activities for service robots in Korea. 2009 ICCAS-SICE, 1884-1888.
[22] Kim, J., Kang, Y. T., Kim, S. N., Hwang, J. H., Lee, S. G., Hong, H., & Kim, M. G. (2008). Performance investigation of thermoelectrics with an external spacer inserted in serious. International journal of thermal sciences, 47(4), 486-494.
[21] Lee, G. P., Choi, J. H., & Lee, S. G. (2008). Material Property Estimation of Paper for Dynamic Behavior Simulation. Journal of the Korean Society for Precision Engineering, 25(5), 103-111.
[20] Kim, G. H., Rhim, S., Yun, S. K., Bum, S. H., Kang, S., & Lee, S. G. (2008, January). Adaptive trajectory shaping for liquid container manipulation. In ICMIT 2007: Mechatronics, MEMS, and Smart Materials (Vol. 6794, pp. 206-211). SPIE.
[19] Kim, S. H., Kim, Y. H., & Lee, S. G. (2007, November). BIOMECHANICAL ANALYSIS OF THE IMPLANT MALALIGHMENT IN POSTERIOR STABILIZED TOTAL KNEE REPALCEMENT (PS-TKR)(1B2 Orthopaedic & Rehabilitation Biomechanics II). In The Proceedings of the Asian Pacific Conference on Biomechanics: emerging science and technology in biomechanics 2007.3 (p. S32). The Japan Society of Mechanical Engineers.
[18] Jo, Y. K., Kim, J. K., Lee, S. G., & Kang, Y. T. (2007). Development of type 2 solution transportation absorption system for utilizing LNG cold energy. International journal of refrigeration, 30(6), 978-985.
[17] Kim, M. S., Cho, H., Lee, S. G., Choi, J., & Bae, D. (2007). DFSS and robust optimization tool for multibody system with random variables. Journal of System Design and Dynamics, 1(3), 583-592.
[16] Kim, J. S., & Lee, S. G. (2007, October). Development of precision inspection system for 3D micro system packaging using the projected grid pattern distortions method. In 2007 International Conference on Control, Automation and Systems (pp. 2808-2811). IEEE.
[15] Kim, G. H., Rhim, S., & Lee, S. G. (2007). Automated Visual Snow-Cover Measurement Using SRG and VMS. IAENG International Journal of Computer Science, 34(1).
[14] Kim, S. K., Moon, H. J., Na, H. S., Kim, K. J., Kim, J. H., Park, J. H., ... & Min, B. I. (2006). The analgesic effects of automatically controlled rotating acupuncture in rats: mediation by endogenous opioid system. The Journal of Physiological Sciences, 56(3), 259-262.
[13] Rhim, S. S., & Lee, S. G. (2006). Tracking control of automatic pipe cutting robot with magnetic binder. In Materials science forum (Vol. 505, pp. 1201-1206). Trans Tech Publications Ltd.
[12] Ryu, J. K., Lee, S. G., Rhim, S. S., Choi, J. H., & Song, I. H. (2005). Simulation and experimental methods for media transport system: part II, effect of normal force on slippage of paper. Journal of mechanical science and technology, 19(1), 403-410.
[11] Lee, S. G., Lim, T. G., & Rhim, S. (2005). Development of Pill Counting Algorithm and Pill Counting Machine Using Non-contact Photo Sensor. Journal of Institute of Control, Robotics and Systems, 11(9), 810-815.
[10] Rhee, K. Y., Lee, S. G., & Lee, J. H. (2005). Fracture and impact behaviour of solid phase formed polypropylene composites with long glass fibres. Materials science and technology, 21(6), 743-748.
[9] Cho, H. J., Bae, D. S., Choi, J. H., Lee, S. G., & Rhim, S. S. (2005). Simulation and experimental methods for media transport system: Part I, Three-dimensional sheet modeling using relative coordinate. Journal of mechanical science and technology, 19(1), 305-311.
[8] Rhim, S., Lee, S. G., & Lim, T. G. (2005). Model-based reference trajectory generation for tip-based learning controller. Journal of mechanical science and technology, 19(1), 357-363.
[7] Ryu, J. K., Lee, S. G., Rhim, S. S., Kim, S. E., & Lim, T. G. (2005). An improvement of transfer performance in paper feeding systems. In Proceedings of International Federation of Automatic Control (pp. 201-205).
[6] Yang, S. H., Kim, K. H., Park, Y. K., & Lee, S. G. (2004). Error analysis and compensation for the volumetric errors of a vertical machining centre using a hemispherical helix ball bar test. The International Journal of Advanced Manufacturing Technology, 23(7), 495-500.
[5] Rhee, K. Y., Lee, S. G., Choi, N. S., & Park, S. J. (2003). Treatment of CFRP by IAR method and its effect on the fracture behavior of adhesive bonded CFRP/aluminum composites. Materials Science and Engineering: A, 357(1-2), 270-276.
[4] Rhee, K. Y., Lee, S. G., & Lee, J. H. (2003). Effect of hydrostatic pressure on the elastic work factor, ηel and fracture toughness determination of unidirectional composites using ηel. Materials Science and Engineering: A, 349(1-2), 218-223.
[3] Yang, S. H., & Lee, S. G. (2002). CNC tool-path planning for high-speed high-resolution machining using a new tool-path calculation algorithm. The International Journal of Advanced Manufacturing Technology, 20(5), 326-333.
[2] Lee, S. G. (1999). Slope Detecting and Walking Algorithm of a Quadruped Robot Using Contact Forces. Journal of the Korean Society for Precision Engineering, 16(4), 138-147.
[1] Lee, S. G. (1993). Theoretical and experimental biomechanical analyses of the effects of age and peripheral neuropathy on unipedal balance (Doctoral dissertation, University of Michigan).