Embedded Files
Start with Blank Document
Start with Blank Document
Small Objects: Inches
two finger click the image
two finger click the image
Save image to documents
Save image to documents
Turn on Snaps
Turn on Snaps
Check END, NEAR and CENTER
Check END, NEAR and CENTER
Use BACKGROUND BITMAP
Use BACKGROUND BITMAP
Type Background Bitmap into command bar. Select the saved SUN STENCIL file to place. Start in Corner (0,0) and set second Corner to (6,8) hit enter to place. Then enter again to confirm.
Type Background Bitmap into command bar. Select the saved SUN STENCIL file to place. Start in Corner (0,0) and set second Corner to (6,8) hit enter to place. Then enter again to confirm.
Use Circle and curve
Use Circle and curve
Draw a circle over the center of the sun and use the control point cure to draw ONE large and ONE small ray.
Draw a circle over the center of the sun and use the control point cure to draw ONE large and ONE small ray.
Use join
Use join
Type JOIN then select all the parts to join them together.
Type JOIN then select all the parts to join them together.
Use Background Bitmap
Use Background Bitmap
Type Background Bitmap again. In the Command Options on the left, select Remove. This removes your background image.
Type Background Bitmap again. In the Command Options on the left, select Remove. This removes your background image.
Use Array Polar
Use Array Polar
Select the rays and hit enter.
Select the rays and hit enter.
For center of array hover cursor over circle until it snaps to Center point.
For center of array hover cursor over circle until it snaps to Center point.
Click when cursor says center.
Click when cursor says center.
For amount of arrays type 5.
For amount of arrays type 5.
For Angle to fill or first reference point, 360 will auto fill, hit enter.
For Angle to fill or first reference point, 360 will auto fill, hit enter.
When completed hit enter.
When completed hit enter.
Use Group
Use Group
Select all the objects and hit enter.
Select all the objects and hit enter.
Use Move
Use Move
Select the grouped sun.
Point to move from is the center.
Type in (3,3) to move the sun to that point.
Use rectangle
Use rectangle
First corner is (0,0) press enter.
Second corner is (6, 6.25) press enter.
Changing Object layers
Changing Object layers
Select the sun.
Two finger click the red layer. On the pop up menu select CHANGE OBJECT LAYER.
Take a screen shot and submit to google classroom
Take a screen shot and submit to google classroom
Screen shot your Sun with
Screen shot your Sun with
(Command + Shift + 4)
(Command + Shift + 4)
or (Command + Shift + 5) for whole screen
copy your command history
copy your command history
Paste your command history into the google classroom submission
Paste your command history into the google classroom submission
Video Tutorials for Reference
Video Tutorials for Reference
Follow these videos to learn the basic commands of Rhino
When watching the videos try this method.
Watch
Pause
Try
Rhino Basics.mp4Rhino Basics
Polyine.mp42. Polyline (multiple straight lines)
Curve.mp43. Curves (lines with anchors that curve)
Join and Extend.mp44. Join (connecting objects and lines)
Trim and Split.mp45. Trim and Split (cutting lines and breaking them apart)
Rotate.mp45. Rotate (rotating objects on an axis)
Array.mp46. Array (duplicating an object on a grid)
Report abuse