Turning Sound On and Off

NOTE: To turn the sound system OFF, follow these steps in reverse

Instructions to turn the sound system ON:

1. Turn on the stage box (top right button in the rack on the stage)

2. Turn on sound board (above power cord on the back of the board)

3. Turn on speakers in the basement

   1. 1. • Find electrical panel in the large room in the basement

         • Turn on both switches that say "Pillar Speakers"

4. Turn on needed monitors

   1. 1. • Make sure they are plugged into a working outlet

         • Push the power button once (same with turning off, but it takes a few seconds)

5. Make sure the speaker in the lobby is also on, if needed. You may need to adjust the main volume knob directly on that speaker during performances.