DIY Vinyl T-Shirt Design
MATERIALS NEEDED:
1. Yellow or blue long or short sleeve t-shirt
2. Ipad
3. Color Vinyl
4. Cricut mat
5. Cricut printer (https://cricut.com/en_us)
6. Iron
7. Hanger
FAQ/TROUBLESHOOTING:
Be careful for design flaws.
Be careful not to damage your decal.
Be careful for the decal when weeding
Make sure you preheat the iron to 345 degrees.
PROCESS:
Choose a yellow or blue long or short sleeve t-shirt and then iron the t-shirt you desire.
Design the logo on the Ipad , choose the color vinyl, and put it on the cricut mat shine-side down.
Send the logo from the Ipad to the cricut printer and let the cricut printer print out the design.
Peel off the unnecessary vinyl that is not part of the logo by weeding it and take the vinyl design that is ready to put on the t-shirt.
Place the design on the upper right hand corner, place the t-shirt on the iron mat, preheat the iron to 345 degrees, set the iron timer to 30 seconds, and place the iron on the logo without moving the iron for 30 seconds.
HANG YOUR T-SHIRT UP AND IT IS READY FOR SALE!!!
Choose a yellow or blue long or short sleeve t-shirt
Choose a yellow or blue long or short sleeve t-shirt
2. Iron the t-shirt you desire.
3. Design the logo on the Ipad.
4. Choose the color vinyl and put it on the cricut mat shine-side down.
5. Send the logo from the Ipad to the cricut printer and let the cricut printer print out the design.
6. Peel off the unnecessary vinyl that is not part of the logo by weeding it and take the vinyl design that is ready to put on the t-shirt.
7. Complete design after weeding.
8. Place the design on the upper right hand corner.
10. HANG YOUR T-SHIRT UP AND IT IS READY FOR SALE!!!
9. Place the t-shirt on the iron mat, preheat the iron to 345 degrees, set the iron timer to 30 seconds, and place the iron on the logo without moving the iron for 30 seconds.