DIY: How to Weed Vinyl- Step by Step
Weeding tool
vinyl
Cricut maker
A design
❀ Step by Step ❀
Step 1
Prepare your workspace
Step 2
Choose the design
on the Cricut application
(The one you think you like)
Step 3
Choose the vinyl color for the design that you picked
Step 4
You will need a cutting matt to secure the vinyl with tape and measure the space for your design
Step 5
Print out the design
Step 6
Weed out the design and Inspect it to ensure all unwanted vinyl has been removed
Step 6
Transfer and apply the design
( Lay your design onto the fabric, this time shiny side up and then press your iron onto your design, hard, for about 20 seconds
Result
(Your result should look something like this)
Helpful Advise
Work in a well -lit area
Use and appropriate weeding tool
Take it slow and be careful
Start with smaller details
Practice on simple designs
Safety Considerations
Work in a well-ventilated area
Be cautious with sharp tools
Keep your work area tidy
Follow the manufacturer's instructions
Always read and follow the instructions and warnings
The iron gets very hot, so make sure to follow the recommended temperature and time