DIY: Holiday bags
Easy project using weeding and iron design.
Materials:
Scissors
Weeding Tool
Iron
Tote bag
Vinyl design
Steps:
Step 1
Get the vinyl design
Step 2
Cut (using the scissors) out the design and weeding the outside of the design
Step 3
Get the bag and place the design on the bag wherever you prefer
Step 4
Heat the iron to 320 degrees. After its hot and reaches 320, grab your iron using two hands making sure to press down hard to ensure the design stays
Step 5
Press down moving up and down for 20 seconds. After place the iron back on its platform
Step 8
Let the bag cool down and your bag is ready to go! Enjoy!
Before
After
Some problems that frequently happen are:
Keeping the iron pressed onto the design for too long can cause the design to melt and be ruined. You can fix this by only pressing the iron onto the design for 20 seconds.
Cutting the design when weeding by accident can cause the design to be ruined. You can fix this by working under a light and working more carefully
Not letting the bag cool down can cause it to stick to other material in the area. You can fix this by letting the design/bag cool down properly.
Some frequently asked questions are:
How long do I press down the iron on the design for? Answer: 20 seconds
What should I use to cut out the design? The weed tool