Embedded Files
Follow us on Instagram! @ehhsbuzzstop
The Materials needed:
Cricut, Iron-on (HTV) material, Cricut heat iron, scissors, weeding tool, Machine mat.
Steps:
Turn the Cricut on make sure the Wifi and Bluetooth is connected to the laptop/ipad.
Get the mat and and cut the vinyl to fit the size of the design you plan to create.
Put the vinyl on the mat and connect your laptop to the Cricut and go on the Cricut to find the image you would like to do.
Put the vinyl on the mat and connect your laptop to the Cricut and go on the Cricut to find the image you would like to do.
Put the mat in the Cricut and there is going to be a button for the mat to sysc in the machine
Then, push the C button to start and the Cricut will start cutting the design.
Then you will weed
Then you will weed
Once done with weeding it, go get the item you want to put the design on,
Once done with weeding it, go get the item you want to put the design on,
Cut out and place it on the fabric,
Cut out and place it on the fabric,
Iron the design on the desired product.
Iron the design on the desired product.
Take the plastic off and BOOM, you're all done!
TROUBLESHOOTING/ Frequently Asked Questions
There might not be enough vinyl and if you don't have anymore, you can reduce the size of the cutout.
Frequently Asked Questions: *questions a beginner might have
How does the Cricut and your laptop connect?
From Bluetooth.
What if the Cricut and laptop don´t connect?
Try shutting down the Cricut, and disconnecting the wifi from the Cricut and reconnecting and starting everything up.
Page updated
Report abuse