Manufacturer: ArcLight Dynamics
Model#: Arc Pro 9600 (table)
Model#: Hypertherm PowerMax 65 W (plasma unit)
Stock#: n/a
Serial#: 65-046635 (plasma unit)
Acquired: Received Feb. 2017, placed in service May 2017 (New)
Link to Green Guard Rust Blocker (corrosion inhibitor recommended for table water, 10/2023; sold by the manufacturer Arc Light Dynamics). This table has a capacity of 100 gallons of water, and requires 2 gallons of rust blocker when the water is changed.
Air Filter System for the Plasma Table (May 2017):
1. General Purpose Filter (blue, on right in picture)
Manufacturer: Campbell Hausfeld
Model # PA212103
2. Sub-Micronic Compressed Air Filter (black in picture)
Manufacturer: Motor Guard
Model #: M-30
3. Air Cleaner and Dryer (the two left-most blue canisters in the picture, the cleaner is the right-most canister, and the dryer is at far left)
Manufacturer: Campbell Hausfeld
Model #: PA208503
Air Filter System Spare Parts:
1. Filter Element Kit: Campbell Hausfeld Part #SX139400AV
2. Replacement Filter Element: Motor Guard Part#M-723 (SKU 00375)
3. Replacement Desiccant: Campbell Hausfeld Part #PA2086
3. Coalescing Filter Element: Campbell Hausfeld Part #PA208703AV
CNC Plasma Table Safety Guidelines (Users must review these before using the table.)
Preparing G-Code Using SheetCam (Refer to these guidelines whenever needing to generate G-Code from either a .dxf file generated in Solidworks, or a .svg file generated in Adobe Illustrator).
Using the ArcLight CNC Plasma Table (Step-by-step instructions when cutting parts on the plasma table once G-Code has been generated).
This picture shows an electrode that is at the point of needing to be changed.
Firmware Updated: CommandCNC 0.9.7 (10/12/2023)