3D Printing

I designed and printed out a phone holder. I researched and measured the exact dimensions for both my phone, and the charger. I cut out a hole for my phone, and a hole at the bottom of the holder. I also added out an engraving of my name and 2 spaces for pencils. The cut took 1 hour and 17 minutes and went very smoothly. While designing the file in fusion I had a few problems while trying to angle the cut out of the phone. I solved this problem very easily, but then realized that I had no way to add a cut out for a charger. I solved this by adding in an angled plane onto the bottom of the sketch of the phone. This allowed me to cut out a rectangle on the bottom of the holder to plug in a charger. I thought that adding my name would be a cool addition to personalize the project. I thought that the top of the project looked like it could fit one more addition, so I added 2 holes for pencils just to add more functionality. I followed the workflow exactly and the printing process had no errors.

Here is a video of the beginning of my Print:

Here are 2 pictures of my finished 3D print: