Embedded Files
1. Noisy, Glitchy Sound - Clock Sync
2. Fix the Neumann Shock Mounts
Note: always make sure you have "Dante Virtual Soundcard" selected as your input and output in the preferences section of your DAW of choice.
__________________________________________
Grace m108 preamp notes:
-Users should not need to get into the Grace setup menu, but if the pre-aamp is not connecting to the Dante system there are a couple things to check.
-first, if the word ;'dante' on the ,1-8 is blicking it means the sample clock is not yet locked - this can take a few minutes when the device is switch off and on. Open 'dante controller' in the computer applications folder, and click the 'refresh devices' button. This sometimes helps the m108 connect and sync it's sample clock.
- on the m108, push and hold the PEAK CLR (setup) button to enter the setup parameters. Check that "1. ADC samplerate" and "2. ADC clocksource" are both set to 'dante'. OR, go to "12. Preset recall" and choose preset 1. granoff1_ and recall that setting (the same setting is saves to slots 59 and 99 in case one gets altered).
____________________________________________
Dante Controller Notes:
You can find a copy of the currently good Dante setup in :
Macintosh HD>Users>Shared>[see 'Dante files]
or at this link. To load the setup choose 'load preset' from the file menu in Dante controller:
__________________________________________
If necessary:
To unlock devices in Dante controller use 1234 for the passcode
Page updated
Report abuse