Steps To Setup Canon Pixma MG 2520 Printer

Canon printers are one of the most robust printers to use as they have grown immensely and catered with their outstanding performance and quality service. Canon has paved the way since an era as it is one of the oldest players in the world of printers. Well if you are also looking to set up your brand new canon Pixma printer then this blog will help you out!!


Follow the steps below and set your canon Pixma wireless setup with the easy steps below. Follow the guide below and get it fixed!!


Wireless Setup for Canon Pixma MG 2520 Printer


  • The first is to switch on the printer and press and hold the wifi button till you observe the light starts blinking make sure there is the blue light that will blink for the Canon Pixma MG 2520 wireless setup process.

  • Now once through with the above steps now you need to press the WPS button on your access point within two minutes. Now the blue light will start to flash to while looking for the access point.

  • The next step is after you are done with the above step you will notice that once it connects to the access point and the power the wifi will flash.

  • The next is for Canon Pixma MG 2520 wireless setup process if you have successfully connected both power and wifi lamp will stop to blink now.

  • Now you need to check if the above step is successful or not you need to try to run the print test on your network settings of the printer.

  • Insert the sheet of paper in the tray for the next procedure of the setup.

  • Now you need to long-press and maintain the cancel button till the indicator lamp flashes and then release it.

  • Well, now your printer will print the network information page which means that the installation of the printer is complete.


Well, we hope that now you are able to do Canon Pixma MG 2520 wireless setup as explained above in detail. In case still, you are unable to do it then you can get in touch with us we will help you out.


Steps To Setup Canon Pixma MG 2520 Printer


  • The first step is to ensure that the printer is sealed well while buying it from the manufacturer. If not then you need to report it.

  • The next step for the Canon Pixma mg2520 setup is to unbox the printer and take out other accessories from the box if in case you got along with the printer.

  • Now you need to place the printer on the flat base carefully.

  • The next step is to take off all the protecting tapes from the canon printer setup process.

  • The next is to connect the printer with the power switch and the other to the printer cord to start it.

  • Now you need to download the printer driver from the renowned web site and then follow the instructions and install it make sure that the driver should be compatible with the device for the process of Canon Pixma MG 2520 setup

  • Once the printer is switched on you need to put the paper in the paper tray to run the print test.


Well if all goes well then you are all set with the canon pixma setup. In case you still are not able to do it then you need to contact us our team of experts will help you out.



Conclusion


We hope that now you have understood the steps above to help you set the Canon Pixma MG 2520 setup. In case still, you are not able to do it then don’t worry you can simply get in touch with our team of experts and they will assist you further. Feel free to reach us we are available for 24*7 at your assistance to resolve all your queries and doubts.