canon pro-100 setup

Canon is taken into consideration because it the most famed and well-known brand of Printers. It is well-known for designing the great pleasure of the Printers to the customers. It is quite clean to set up the Canon Pixma Pro-one hundred Printer. This printer has gained a reputation as they provide the finest pleasant of Print-outs to the customers.

So if you are also looking out for the steps for the canon pro-100 setup then this guide will help you out.

Steps For Canon Pro 100 Setup

To begin with the setup of the printer you need to make sure that before unboxing it your printer is sealed well with the manufacturer’s seal.

Now you need to remove all the tapes and packaging from the printer and get started now.

The next step is you need to place the printer on the flat surface and begin with the canon pro-100 setup.

Now you need to power the printer’s cable to the power button and turn in your printer.

The next is to take the A4 size and cargo it in your printer for the canon pro-100 setup.

Now, you could see the (resume/cancel) button, you want to press and maintain the button until the power light begins flashes six times.

After that, you could release the button and the community web page might be revealed.

Check the network connection lively whilst taking the printouts. Also, take a look at two times to make sure that the provider set identifier is displayed because of the actual name for the wifi community.

The last step is you need to run the print test if all is good then you are now all completed with the canon pro-100 setup.