Embedded Files
Printers are known to be one of the greatest inventions of humans for more than a decade now. Canon is the most used brand when it comes about printers as they are well known for their performance and range of printers. Well if you are also looking out for the steps for the setting of the canon pixma mg 3022 printers then this blog will help you out.
So let’s start with the steps for the canon pixma mg 3022 setups follow the guide below and get set for the setup of your canon pixma printer!!
Steps For Canon Pixma MG 3022 Printer
To begin with, the canon pixma mg3022 setup is to check that the printer is purchased from the manufacturer, and also you need to ensure if it is sealed correctly before opening.
The next is to unbox your canon pixma mg 3022 printer box & check if the printer components are provided in it and then remove the packaging from it.
After the above steps now place the printer on a flat surface for the next steps.
Now you need to connect the power cord to the respective port of the canon pixma mg3022 setup process.
Well, now you need to switch the printer on by force pressing its power button.
The next one is to unpack the ink cartridges enclosed with the printer package.
After you have unpacked the printer package open the front door of the printer. Insert the cartridges into the respective slots
.
Well, now you need to make sure you load enough papers into the input tray with their print side facing up. Print a test page and complete the first time printer setup.
Now after the above step-free Canon Pixma MG 3022 driver download. Also, ensure that the driver you installed is compatible with the device.
.Lastly you need to run the print test if all goes well then you are all done with the canon pixma mg3022 setup process.
Well, we believe that you have understood the steps now. In case of any issues, you can reach us.
Steps For Canon Pixma MG 3022 Wireless Setup
To start with the wireless process first you need to make sure that the printer is turned on.
The next one is to press & maintain the wifi button at the top of the printer until the lamp flashes once for the process of canon pixma mg3022 setup wireless.
Well, now you will notice that your lamp next to this button begins to flash blue after which go to the access point and press the wps button within 2 mins.
After you are through with the above process now the blue wifi lamp at the printer will flash at the same time as searching, and the power and wifi network will also flash while connecting to the access point.
Now when the printer has correctly made a connection to your wi-fi network, the power and wifi light will stop flashing and continue to be lit.
To confirm if the printer is well connected with wifi we recommend running the print test if you are able to print then it means you are all done with the process of canon pixma mg3022 setup wireless.
Conclusion
Well, now we hope that you are able to do the canon pimxa mg 3022 setup wireless as explained above with the easy guide. In case still, you have issues or any queries then you can get in touch with our team and they will assist as our experts are available for 24*7 at your assistance to resolve all your queries and doubts. Feel free to reach us. We are happy to assist you.
Page updated
Google Sites
Report abuse