Embedded Files
Canon pixma printers are the most robust and user-friendly printer with the best of features intact canon needs no introduction as Canon printers are known for their performances and high printing quality as canon has about million of users across the globe. Well, if you are also looking out to set up your printer then this blog will help you out to fix your queries.
So let’s get started with the steps to do the canon pixma ix 6820 printer setup with the easy steps. Follow the guide below and get set go with the canon pixma setup steps.
Canon Pixma Setup For IX 6820 Printer
Firstly you need to check that the printer is sealed with the manufacturer seal.
The next step is to unbox the printer and then place the printer on the flat base carefully.
The next one is to remove the protecting tapes from the printer for the canon pixma ix6820 setup
The next steps is to connect the printer with the power switch and the other to the printer cord to start it.
Now after you are done with the above process now install the printer driver from the renowned website and make sure that the driver installed suites the best for the device for the canon pixma ix6820 setup.
Now that you are all done with the steps above of driver installation you need to insert the paper in the paper tray to run the print test.
Well, now you are all done with the canon pixma ix6820 setup as explained above. In case of any issues then you can reach us we are happy to assist you.
Canon Pixma IX 6820 Wireless Setup
The first step is to check and ensure that your wifi connection should be in the range of your Canon printer.
The next step is to make sure that your WPS button must be ready to press.
Now you need to press and hold the ‘wireless (A) button present to your printer. The wi-fi plans will start to flash.
Press the button for the canon pixma ix6820 wireless setup process.
The next step is to press the ‘Wireless’ button until you see the lamp is lit up.
Now you need to press the button and make certain that the wireless light lamp is on as the lamp will flash.
After this, click on on the WPS button present on the router for approximately 2 mins fo the process of canon pixma ix6820 wireless setup.
The Blue WiFi mild in your Canon will start to flash whilst searched. Also, the ‘Power and WiFi’ mild will flash whilst attempting to hook up with the Access factor.
Once your printer has efficaciously made the Wi-Fi connection, the strength and the mild will prevent blinking and remain steady.
Hence now you are all done with the wireless setup now run the print test if all goes well then you are done with the wireless process.
Conclusion
We hope that now you are able to do the canon pixma ix6820 wireless setup as explained above in detail. In case still, you have issues then you can get in touch with our expert as they are available for 24*7 at your assistance. Feel free to reach us we are happy to help you.
Page updated
Google Sites
Report abuse