Embedded Files
Canon pixma setup is one of the easiest setups as canon is one of the most preferred brands in the world of the printer with across millions of users across the globe. Canon pixma ranges of the printer are one of the finest ranges of printers. Well if you are also looking out for the steps to set up your canon printer then this blog will help you do it. So let’s begin with the steps to do the setup.
Let’s get started with the steps to do the setup below in-depth follow these steps and get started!!
Steps For Canon Pixma MG 2522 Setup
Firstly ensure that your printer properly sealed with the manufactures’ seal before unboxing your canon pixma mg2522 printer setup.
Now you need to unbox your printer and then follow the instruction by simply observe these steps.
The next is to assemble and insert the sheets in the printer.
The next step is to plug the printer’s cord into the printer and an energy socket.
The next step for the canon pixma mg2522 printer setup plugs the ethernet cable into the printer. Depending on your setup, you’ll plug the other end into your table, wall, or without delay into your router.
Now you need to press the power button to show on the printer for the setup process.
Well, wait approximately one minute while the printer configures. When it’s prepared, the repute mild will turn green
Lastly, you need to insert the sheets in the printer’s tray and then run the print test if all goes well then you have completed the printer setup.
Hence we hope that now you are able to do the canon pixma mg2522 printer setup as explained above. In case of any queries reach out.
Steps For Canon Pixma MG 2522 Wireless Setup
Make sure that the printer is turned on and then click on the setup button on your canon printer.
Now the software program will check to peer if there are any updates to the driving force and software program and could download them as essential, this make takes a couple of minutes.
The next step for the canon pixma mg2522 wireless setup is to select your location and then click on the next option.
The next is to agree to the terms of the license settlement and then click yes.
Now to begin you need to install wireless processes, click on the next option.
The next step is to select a wireless LAN connection and then click on the next option.
Connect via a wireless router then click on the next option on your screen for the process of canon pixma mg2522 wireless setup.
The next one is If you've got already linked your printer for your wireless then you need to choose it from the list inside the printers and network list appearing on your window and then you need to click on the next option to start the software installation, and then proceed.
Ensure “Setting printer could not be found on the listing” is selected, then click on the next option.
The following display will briefly appear.
The setup guide will open and guide you through connecting your printer to your community using the “Connection thru Cableless setup” procedure.
Please observe the on-display screen instructions carefully to prepare your printer for connection. Only click on subsequent, while your printer corresponds with the example proven within the diagrams underneath.
Please wait at the same time as the setup discovers the printer. During this time the network connection to your pc is temporarily disabled.
Once the setup is complete, click on the next option, and now to confirm if all is well connected you need to run the print test if all is successful then you are all done with the setup process.
Conclusion
We hope that now you are able to do the canon pixma mg2522 wireless setup as explained above. In case of any issues then you can reach out as our team is available for 24*7 at your assistance. Feel free to reach us as we are happy to help.
Page updated
Google Sites
Report abuse