canon mg3022 setup


Canon printer is known to be one of the most frequently used printers across the globe among millions of users as canon is known for its features and unique rangers of printers as pixma is one of the exclusive range of printers. If you are also looking out for the steps to do the canon mg 3022 printer setup then this blog will help you answer all your queries.


So let’s look into the steps to do the canon mg 3022 printers follow the steps below and get started now.


Steps For Canon MG 3022 Printer Setup


  • Firstly you need to ensure that the printer is properly sealed with the manufactures’ seal before unboxing your canon pixma mg 3022 printer.

  • Now you need to unbox your printer and then follow the instruction by simply observe these steps. You also can discard the grey USB cable, but you'll want an Ethernet cable.

  • Now you need to assemble and insert the sheets into the printer for the process of canon mg3022 setup.

  • Now you need to plug the printer’s cord into the printer and an energy socket.

  • The next step for the canon mg3022 setup plugs the Ethernet cable into the printer. Depending on your setup, you’ll plug the other end into your table, wall, or without delay into your router.

  • Well now press the power button to show on the printer.

  • Wait approximately one minute while the printer configures. When it’s prepared, the repute mild will turn green.

  • Lastly, insert the sheets in the printer’s tray and then run the print test if all goes well then you have completed the printer setup.







Steps For Canon MG 3022 Wireless Setup


  • The first step is to turn on your canon mg 3022 printer for the process of wireless setup.

  • The next step is that if the light on your printer turns green it means that the wireless is on.

  • Press the setup button on your printer for the canon mg3022 wireless printer setup.

  • The next step is to select the wireless LAN setup on your canon mg 3022 printer.

  • Now you need to click on the ok option for the wireless setup.

  • Now that you are done with the above step check if the wireless connection is on if the blue Wi-Fi flashes up.

  • Now you need to wait for a few minutes as the printer is searching for the well-suited device to get connected.

  • Now you need to press the stop button if the push button method screen

  • Press the stop button if the push button appears on the printer for the process of canon mg3022 wireless printer setup.

  • You will notice that your net connection can also be unavailable at some point in the installation.

  • Lastly, once you are done with the above step run a print test to check if the printer is printing if it is successfully printing then you are all done with the wireless setup.


Conclusion

We hope that now you are able to do the canon mg3022 wireless printer setup as explained above. In case still, you are facing issues then you can get in touch with our team of experts and they will assist you as they are available for 24*7 at your assistance.