期刊論文 (SCI)

• Jinn-Jong Sheu, Cheng-Hsien Yu,Chiuan-Shuen Tasi (2015) The Preform and Cold Forging Die Design for a Hollow Bushing Part with Face Gear Features, Journal of the Chinese Society of Mechanical Engineers, Vol.36, pp.75-84. SCI.
• Jinn-Jong Sheu,Cheng-Hsien Yu (2009) Preform and forging process designs based on geometrical features using 2D and 3D FEM simulations, International Journal of Advanced Manufacturing Technology, Vol.44, pp.244-254. SCI.
• J.J. Sheu,C.H. Yu (2008) The die failure prediction and prevention of the orbital forging process, Journal of Materials Processing Technology, Vol.201, pp.9-13. SCI.

期刊論文 (EI)

• Jinn-Jong Sheu, Chien-Jen Ho, Cheng-Hsien Yu and Kuo-Ting Wu (2018). Fastener products lightweight design and forming process simulation. In MATEC Web of Conferences (Vol. 185, p. 00030). EDP Sciences. EI.
• Cheng Hsien Yu,Jinn Jong Sheu (2015) Cold Forging Die Design and Process Simulation of a Disk with Inner Ring Gear, Key Engineering Materials, Vol.626, pp.211-216. EI.
• Jinn Jong Sheu, Chia Cheng Hsieh,Cheng Hsien Yu (2015) Cold Roll Forming Process and Die Design for Double-Gutter Frame of Drawer Slider, Key Engineering Materials, Vol.626, pp.205-210. EI.
• Cheng Hsien Yu,Jinn Jong Sheu (2013) Preform and Die Designs for Hot Forging Process of Linear Slide Block, Applied Mechanics and Materials, Vol.419, pp.395-400. EI.
• Jinn-Jong Sheu,Cheng-Hsien Yu (2011) Local Thickening of Stainless Tube Considering Dimension Variation of the Cold Roll Formed Tube Billet, AIP Conference Proceedings, Vol.1315, pp.575-580. EI.

期刊論文 (中文)

• 吳國鼎,張婉琪,許進忠,余征諴, 2019, 扣件參數化設計及成形負荷快速評估系統, 機械工業雜誌, Vol.441, pp. 37-42.
• 許進忠,余征諴,吳國鼎,張佳富,張婉琪 (2018) 應用類神經網路模型於螺栓多道次鍛造成形負荷預估, 精密機械與製造科技期刊, Vol.8, No.1, pp.01-15, ISSN:2224-4328.
• 余征諴, 許進忠, 毛建豐,陳彥宏 (2009) 細小圓管冷鍛成形分析與模具設計, 鍛造, Vol.18, pp.20-27.
• 許進忠, 余征諴,蔡全順 (2010) 中空套筒零件鍛造成形製程設計與有限元素分析, 鍛造, Vol.20, pp.33-38.
• 許進忠,余征諴 (2010) 不銹鋼管凸緣擺輾成形製程技術, 精密機械與製造科技期刊, Vol.1, pp.62-67.

會議論文 (英文)

• Jinn-Jong Sheu, Cheng-Hsien Yu (2018) Development of the orbital forging process of a vehicle sleeve, The 11th Asian Workshop on Micro/Nano Forming Technology (AWMFT2018), Yun-Lin, Taiwan.
• Jinn-Jong Sheu, Chien-Jen Ho, Cheng-Hsien Yu and Kuo-Ting Wu (2018) Fastener products lightweight design and forming process simulation, ICPMMT2018(International Conference on Precision Machinery and Manufacturing Technology), Crowne Plaza, Feb4-8,Auckland, New Zealand.
• J. J. Sheu, C. H. Yu and C. C. Cheng (2016) Roll Bending Process and Roll Designs of Roll Formed Sheet Panel, Advances in Materials and Processing Technologies 2016 (AMPT 2016), Kuala Lumpur, Malaysia .
• Jinn-Jong Sheu, Su-Yi Lin,Cheng-Hsien Yu (2014) Optimum die design for single pass steel tube drawing with large strain deformation, 11th International Conference on Technology of Plasticity, ICTP 2014., Nagoya Congress Center, Nagoya, Japan.
• J.J. Sheu,C.H. Yu (2009) Local Thickening Limitation of Tube End and the Pre-Form Designs, The International Conference on Advances in Materials and Processing Technologies (AMPT 2009), Kuala Lumpur, Malaysia.
• Jinn-Jong Sheu,Cheng-Hsien Yu (2007) Cold Forging Die and Process Design for the Defect-Free Production, AUTOMATION 2007, pp.111-114, Taipei , Taiwan.
• J.J. Sheu,C.H. Yu (2006) Forming analysis and die design for cold forging of a combined gear and cup product, Advances in Materials and Processing Technologies (AMPT) conference, Lasvegas , America.

會議論文 (中文)

• 許進忠、陳靖、張晉誠、余征諴 (2018) 具凸緣及壓扁特徵扣件成形製程分析, 台灣鍛造協會一○七年度會員大會暨「國內鍛造技術研發現況研討會」 , 台灣鍛造協會, 台中, 台灣.
• 許進忠,許維中,余征諴,梁倉輔,李炳坤 (2017) 對稱路徑三維柔性連續輥軋製程設計及分析模擬, 中國機械工程學會第三十四屆全國學術研討會論文集, 國立勤益科技大學, 台中市, 台灣.
• 許進忠, 王嘉章, 余征諴, 紀宏儒, 林鈺凱, 李炳坤 (2016) U型不等斷面三維柔性連續輥軋製程設計與分析, 中國機械工程學會第三十三屆全國學術研討會論文集(CSME), 新竹, 台灣.
• 許進忠, 梁倉輔, 余征諴 (2016) 方管連續輥軋成形設計及分析, 中國機械工程學會第三十三屆全國學術研討會論文集(CSME), 新竹, 台灣.
• 許進忠、紀宏儒、余征諴、徐毓宏(2015) 帽型U斷面產品連續輥軋製程設計及分析模擬, 中國機械工程學會(CSME), 高雄, 台灣.
• 許進忠, 毛建豐,余征諴 (2009) 不銹鋼零件多道次冷鍛成形分析與模具設計 , 中國機械工程學會(CSME).