Projects - 6

Laboratory Machine Base Cabinet:

I designed and built this cabinet to hold a 500 lb universal test machine. It's made with hard maple and maple plywood.

Make-Up Vanity:

This make-up vanity was also built of maple.

Additional photos can be found at this link: https://goo.gl/photos/cXhLkdK3HUntVoxQA

Companion Bath Cabinet:

And then I made a companion cabinet to go with the vanity cabinet above.

I also made a matching picture frame:

Mahogany Mid-Century Modern Vanity:

I designed and built this vanity to go in the bath of a MCM house. It's dyed mahogany.

Behind one door is a pullout shelf:

The long drawer front above it, where the sink will be on the counter top, tips out for storage of small items.

And here it is after the counter top and sink were installed:

Pullout Kitchen Pantry Cabinet:

I designed and built this pullout pantry to fit into a small dead zone in this kitchen. I built and finished the new cabinet to match the existing cabinets as close as practical:

I also built the small cabinet on the right side.

Wainscot and Bath Vanity:

I designed and built this wainscot panel system and vanity for a small half bath.