Setup HP 8610 wireless printer

The HP Officejet Pro 8600 is a color multifunction printer with fax, copy, print, and scan functions. It is compatible with small home offices for industrial purposes. Find device drivers for your printer at 123hp com/setup 8600. These printers produce a low cost per page for high-quality prints. And it has modern technology like built-in Wi-Fi connectivity.

HP Officejet Pro 8600 supports mobile printing technology such as wireless direct printing, Mopria print service, Apple AirPrint, and HP ePrint. And it helps in yellow, cyan, black, and magenta. The HP Officejet Pro 8600 can print documents and photos from a USB flash drive. You can set up an HP printer through 123.hp.com/setup 8600 It has fax functions such as automatic reduction, automatic redial, and fax forwarding.

HP OfficeJet Pro UnBox-123 hp com/ojpro8600

Start the process by opening the box and removing the software installation CD. On the other hand, you can download the software and drivers from the HP official website. The installation booklet provides you with basic installation instructions for your printing device. Then use the HP Instant Ink card and subscribe to the Instant Ink service. The User's Guide is the document that provides information on additional functions such as fax and web services. Then you can find the power cord that is required for a fax receive connection. Configure the HP printer at 123 hp com/setup 8600. Use the setup cartridges to initialize and calibrate the ink levels. Now, remove the cardboard and set it aside for the recycling process. You can recycle all the materials in the HP package; Learn more at hp.com/recycle. Remove the Styrofoam end caps and remove the printer with the plastic bag. After that, remove all visible tape around the printer and the cellophane covering the printer's control panel. Now open the scanner lid and remove the foam sheet. Then open the front input tray and remove the blue tape. After that, connect one end of the power cord to the printer device and the other end to the power supply.

123 hp com / setup 8600 - Initialize HP Officejet Pro 8600

First, remove the cardboard box from the HP Officejet Pro 8600 printer box. You can find the software installation CD; The same software can also be downloaded from 123 hp com/setup 8600. Below are installation posters, basic setup instructions, Getting Started Guide, Cautions booklet, ink cartridge kit, cable, fax cable, and the HP Instant Ink card.

Now tilt the box and place it on a flat surface and remove the lid that contains the printer. Remove the Styrofoam caps on both sides. Please note that all packaging materials that come with the printer are recyclable. Then remove all the blue tape around the tape and slide the input tray out, remove the packing materials inside, and close the input tray.

Remove the clear plastic from all reflective surfaces and now lift the scanner lid. You can find a sheet of Styrofoam inside the scanner platform. Turn on the HP Officejet Pro 8600 printer, unplug the power cord, and connect it to the printer's power cord and wall outlet. Turn on the printer. It takes time for the printer to initialize from the printer's control panel to choose the date, time, country, and language.

Setting up the HP Officejet Pro 8600 printer

The printer asks us to install the ink cartridges, open the ink cartridge access door and wait for the carriage to reach the ink access area.

Then remove the carriage insert take out the ink cartridge pack, look at the color in the cartridges, as well as the slot to insert the ink cartridges correctly.

Before inserting, remove the orange tab around the cartridges, be aware that you must not touch the copper contacts that can damage the ink flow.

Then close the ink cartridge access door to the printer and touch OK on the printer screen. Now the printer asks you to install paper.

Slide the input tray and raise the output tray. Adjust the paper width guide to load new paper into the HP Officejet Pro 8600 printer and touch OK on the printer screen.

Then slide the output tray for the printer to print the alignment page after aligning the print head.

Then open the scanner lid and position the bottom of the alignment page following the markings on the scanner lid to position the alignment page correctly.

Touch scan on the screen after scanning and aligning the print head and a success message will appear. If you do not receive it, visit 123hp com / ojpro8600 to debug the problem.

Conclusion

This site 123.hp.com/setup 8610 Provides instructions for downloading the printer driver, wireless setup, and assistance for printer-related problems. We can help you troubleshoot the printer if you can give us a call.