Access the printer's Command Center RX web page
Log into the printer's Command Center RX web page
Navigate to Device Settings > Date/Time
Set Date and Time to correct values if incorrect
Navigate to Network Settings > TCP/IP
IPv4 Settings (Wired Network)
If DHCP/BOOTP is set to On, continue to IPv4 Settings (Common)
If DHCP/BOOTP is set to Off
Is the IP Address correct?
Is the Subnet Mask address correct?
IPv4 Settings (Common)
If DHCP/BOOTP is set to On
if DNS Server set to Use DNS Server from DHCP? continue to Network security settings
If DNS Server is set to Use following DNS Server
In the DNS Server (Primary) field, type in the IP address of the DNS server
If using a home or business router, this is the IP address of the router
If DHCP/BOOTP is set to Off
Is the Default Gateway IP address correct?
If using a home or business router, this is the IP address of the router
DNS Server should set to Use following DNS Server
In the DNS Server (Primary) field, type in the IP address of the DNS server
If using a home or business router, this is the IP address of the router
Google (https://dns.google/ and https://developers.google.com/speed/public-dns/docs/using)
8.8.8.8
8.8.4.4
Cloudflare (https://1.1.1.1/)
1.1.1.1
1.0.0.1
OpenDNS (https://www.opendns.com/setupguide/#familyshield)
208.67.222.222
208.67.220.220
If any of the above was set or changed then
Select Submit
Select OK
Navigate to Management Settings > Reset
Select Restart Device
! Do not close the Command Center RX web page
Wait ~2 minutes and refresh the web page, and log back into the Command Center
Navigate to Security Settings > Network Security
Set TLS or SSL to On
Serverside Settings
TLS Version
Untick SSL 3.0/TLS 1.0 (some printers may not have this)
Untick TLS 1.1 (some printers may not have this)
Select TLS 1.2
Select TLS 1.3 (some printers may not have this)
Effective Encryption
Untick DES (some printers may not have this)
Untick 3DES (some printers may not have this)
Untick ARCFOUR (some printers may not have this)
Untick AES (some printers may not have this)
Select AES-GCM
Select CHACHA20-POLY1305 (some printers may not have this)
Hash
Untick SHA1 (some printers may not have this)
Select SHA2(256/384)
Clientside Settings
TLS Version
Untick SSL 3.0 / TLS 1.0 (some printers may not have this)
Untick TLS 1.1 (some printers may not have this)
Select TLS 1.2
Select TLS 1.3 (some printers may not have this)
Effective Encryption
Untick DES (some printers may not have this)
Untick 3DES (some printers may not have this)
Untick ARCFOUR (some printers may not have this)
Untick AES (some printers may not have this)
Select AES-GCM
Select CHACHA20-POLY1305 (some printers may not have this)
Hash
Untick SHA1 (some printers may not have this)
Select SHA2(256/384)
3. Select Submit to apply any changes
Navigate to Management Settings > Remote Services
Set Remote Services to On
Communication Protocol should be set to MQTT (ignore if not shown)
Connection Mode should be set to Manage (ignore if not shown)
Expiration Time Settings should be set to Off (ignore if not shown)
Select Submit
Select OK
A restart is not required
Wait for the settings to be applied
Select the Settings button.
Skip this step If the printer is not required to use a proxy server to access the internet.
Note: If the Settings button for the Proxy is not shown, restart the printer.
Select the Settings button next to Proxy
Select On for Proxy
Set Proxy Server (HTTP) address
Set Port Number
Select On for Use the Same Proxy Server for All Protocols
Select Submit
Select Management Settings > Remote Services
Select Settings
For Registration By select Use Access Code
In the URL field input https://rfs-eu.kyocera.biz
In the Access Code field input the 8 character case-sensitive registration access code that was provided
Select Submit (just once)
The printers' Command Center web page will take a moment to respond
Select OK (if prompted)
Registration can take up to ~5 minutes
A successful registration is shown when it is not possible to turn off Remote Services
Navigate to Device Information > Configuration, Options, Remote Services section
Counter info Last Sent should be for today
2xx - restart photocopier/printer and try registration again
400 - try a dummy access code and then try the provided access code
403 - check that there is a 'S' in HTTPS
403 - Printer record may already exist in another group. Printer records (serial numbers and MAC addresses) are unique in KFS