Hive Mind Synthesis
DoubleDouble
Embedded Files
BOM
BOM
1x Hive Mind DoubleDouble board/faceplate set
6x Thonk-style 3.5mm jacks
1x DPDT mini toggle switch
BUILD
BUILD
This is a quick, simple build. You add all components to the board, place the faceplate, flip, and solder!
1) Place Components
No need to solder yet
2) Place Faceplate
Add the faceplate on top of the unsoldered components.
3) Flip and solder
Flip the board and balance the ends so that all of the components can hang in place.
Solder the pins on the switch and jacks. There may be some gapping between the jacks and the board, depending on the model of switch used. Soldering it upside-down like this makes it a non-issue
3) Flip and add nuts
Flip the board to view the faceplate and add knurled nuts around jacks.
2-sided faceplate gives you the option of rotating placement 180 degrees.
USE
USE
The switch routes both connections in either direction.
Great for moving a PitchCV/Trigger set between two VCO/VCA routes
If you use an on-off-on switch, you can also use this for muting!
Page updated
Google Sites
Report abuse