Hive Mind Synthesis
3 Switches
Embedded Files
BOM
BOM
1x Hive Mind 3 Switches board/faceplate set
9x Thonk-style 3.5mm jacks
3x SPDT mini toggle switch
BUILD
BUILD
This is a quick, simple build. You add all components to the board, place the faceplate, flip, and solder!
1) Place Components
No need to solder yet
2) Place Faceplate
Add the faceplate on top of the unsoldered components.
3) Flip and solder
Flip the board and balance the ends so that all of the components can hang in place.
Solder the pins on the switches and jacks. There may be some gapping between the jacks and the board, depending on the model of switch used. Soldering it upside-down like this makes it a non-issue
3) Flip and add nuts
Flip the board to view the faceplate and add knurled nuts around jacks.
2-sided faceplate can orient jacks at top or bottom of module as desired.
USE
USE
Each of the 3 switches acts as an A/B switch for the input/output with matching design
If you use an on-off-on switch, you can also use this for muting!
Page updated
Google Sites
Report abuse