Drinking fountains are widely used in public spaces such as schools, parks, and office buildings. They provide a convenient way for people to access clean drinking water. However, like any mechanical device, drinking fountain troubleshooting is vital to prevent any emergency and costly repairs. This guide will provide an overview of common issues that can arise with nursery drinking fountains and how to troubleshoot them.
Ø No Water Flow
One of the most common issues with your nursery water fountain is a need for more water flow. Probably, you may lose the functionality due to various things, including:
· Clogged aerator: A small screen at the end of the spout helps mix air with the water, creating a steady flow. If the aerator becomes clogged with debris, it can restrict water flow. To check for a clogged aerator, remove the aerator and clean it with a small brush or a toothpick.
· Low water pressure: Have you noticed that the water pressure is too low? It can prevent the fountain from dispensing water. Check the water pressure at the source and ensure that it meets the manufacturer's specifications.
· Water shut-off valve: The water shut-off valve controls water flow to the fountain. Make sure the valve is fully open and not blocked by debris.
· Leak: If the fountain is leaking, it can cause a loss of water pressure. Check for leaks around the fountain and tighten any loose connections.
· Broken solenoid valve: If the above steps don't fix the issue, it's possible the solenoid valve, which controls the flow of water, may be broken and needs to be replaced.
Ø Drinking fountain troubleshooting for Low Water Pressure
Another common issue with nursery water fountains is low water pressure. It may happen due to a variety of factors, including:
· Clogged water line: If it becomes clogged with debris, it can restrict water flow to the fountain. Flush out the water line to remove debris and improve the water pressure.
· Leak: If the fountain is leaking, it can cause a loss of water pressure. Check for leaks around the fountain and tighten any loose connections.
· Broken water pump: If the pump is not working correctly, it can cause the water pressure to drop. So, don't hesitate to check out the water pump and replace it if essential.
· Low water pressure at the source: If the water pressure is down at the start, it can affect the fountain's performance. Check the water pressure at the head and ensure it meets the manufacturer's specifications.
Ø Have not noticed that Water is too cold or too hot
Some drinking fountains have a cooling or heating system to provide chilled or heated water. If you find water is too cold or too hot, it can be caused by a variety of factors, including:
· Thermostat issues: The main functionality of the thermostat is to control the temperature of the water. If the thermostat malfunctions, it can cause the water to be too cold or too hot.
Cooling/heating unit not working: If the cooling or heating unit is not working correctly, it can cause the water to be too cold or too hot. Check the cooling or heating unit and replace it if necessary.
· Insulation issues: If the nursery water fountain is not insulated correctly, it can cause the water to lose or gain heat.
Bottom Line
Hopefully, the discussed points will give a clear picture of a drinking fountain troubleshooting to make your water unit in the best condition. Source Omega is a reliable service provider with highly trained technicians experienced in troubleshooting and repairing all drinking fountains. They have the knowledge and tools to diagnose and fix any issues that may arise quickly.