Embedded Files
The user can place their files with the parameters of the cores and wires on the External Storage in the directory rWinding/ring and rWinding/wire.
To edit a resource file, use the RESOURCE EDITOR (Menu - Editor).
Attention! If you use a text editor to use UTF-8!
File with parameters of the cores has the following structure in the lines:
•1 or 0 (inch or millimeters)
•1 or 0 (choke or ferrite)
•marking ring (the separator ‘;’)
•outer diameter (separator ‘;’)
•inner diameter (separator ‘;’)
•height (separator ‘;’)
•Al (delimiter ‘;’, 0 ferrites, because it is considered from the dimensions and material properties)
•A*coils (separated by ‘;’, 0 ferrites, because it is considered from the dimensions and material properties)
•Al deviation max
•Al deviation min
•comment (Optional. Separator ‘;’ to separate lines of comment)
•comment in Russian lang (Optional. Separator ‘;’ to separate lines of comment)
The maximum number of rings in the file 30.
Example:
fer_exmpl.txtdross_exmpl.txtFile with parameters of the wires has the following structure in the lines:
•1 or 0 (inch or millimeters)
•marking of wire (separated by ‘;’)
•diameter without insulation (separator ‘;’)
•outer diameter (separator ‘;’)
•the mass per unit length (separator ‘;’, kg/km)
•comment (Optional. Separator ‘;’ to separate lines of comment)
•comment in Russian lang (Optional. Separator ‘;’ to separate lines of comment)
The maximum number of wires in the file 30.
Example:
wire_exmpl.txtGoogle Sites
Report abuse