programTriggerChannelParam()

Description

Sends a single trigger channel parameter to the Pulse Pal device. 

• This is faster than syncAllParams, and is preferred in closed-loop feedback applications where a single parameter must be quickly adjusted.

• Parameters are described in depth in the Parameter guide. 

Syntax

programTriggerChannelParam(paramName, channel, value)

Parameters

• paramName: An integer or string specifying the parameter to change. 

  • In time-critical applications (i.e. closed-loop), specify the parameter by its numerical code (see equivalent function in MATLAB client for code table)

  • In less constrained applications, paramName contains a string with the parameter field name (i.e. "triggerMode")

• channel: The trigger channel to program (1-2)

• value: The value of the parameter. Acceptable range depends on parameter being set.

Returns

None

Example

myPulsePal.programTriggerChannelParam('triggerMode', 1, 2) # Set trigger channel 1 to pulse gated mode

myPulsePal.programTriggerChannelParam('triggerMode', 2, 0) # Set trigger channel 2 to normal mode