Bill of Materials for v1.1

*Note: The leaflabs Maple microcontroller platform was recently retired and is now out of stock at almost all vendors. An updated version of Pulse Pal based on Arduino Due is undergoing severe torture testing, and will be released this coming fall, 2016. Until then, be sure not to order other parts unless you have successfully obtained a Leaflabs Maple microcontroller!

• Digikey's internal BOM system has a list of Pulse Pal r1.0 parts ready to order! Log into your DigiKey account and then Click Here. Alternatively, search for BOM#1501598.

• Sparkfun also has the r1.0 parts ready to order as a "wish list". Log into your Sparkfun account and then Click Here.

  • For the printed circuit board, we have previously used SeeedStudio's FusionPCB service as follows:

i. Select QTY: 5

PCB Layer: 2

PCB Thickness: 1.6mm

PCB Dimension: 10cm max X 10cm max

PCB Color: green

Surface Finish: Hasl(Lead Free)

This should work out to ~$5.00 per board for a minimum order of 5 boards (Feb 2014). Select "Next".

ii. Select \CAD\PCB\r1_0\GERBER\Rev1_0.zip and finish the order. Design files are available in the Pulse Pal repository.

• • For the acrylic enclosure, you can order from Pololu's Custom laser cutting service as follows:

# of pulse pals: Quote to order: Price (each, 5-day lead):