Bill of Materials for v2.0
Note: v2.0 relies on parts that are out of production. v2.1 is recommended for new builds.
Bill of materials
For the printed circuit board, we have previously used SeeedStudio's FusionPCB service as follows:
Upload the GERBER zip file from https://github.com/sanworks/PulsePal/tree/master/CAD/PCB/r2_0/GERBER
Select:
i. QTY: 5
PCB Layer: 4
PCB Thickness: 1.6mm
PCB Dimension: 10cm max X 10cm max
PCB Color: green
Surface Finish: Hasl(Lead Free)
This should work out to ~$10.00 per board for a minimum order of 5 boards (Oct 2016).
For the enclosure, we have previously used Pololu Robotics and Electronics laser cutting service.
Upload the enclosure design file from https://github.com/sanworks/PulsePal/tree/master/CAD/Enclosure
Select a 3mm acrylic.
Complete the quote request. Pololu will contact you with ordering options.