Student Guidance

Doctoral Students (3)

1. Mr. Yogesh Verma (2014-19) : J-7, C-2

Registration Seminar title : Vibration of Mindlin’s plates with rotationally restrained edges

Enhancement Seminar title : Vibration of Kirchhoff’s plates with translationally constrained edges

Extension Seminar title : Partially wet modeshape of cantilever plate theoretical and experimental verification

Thesis title : Free dry and wet vibration of plates including rigid body modes through semi-analytical approach with experimental verification.

2. Mr. Rajendra Praharaj (2017-20) : J-6, C-2

Registration Seminar title : Transverse vibration of rectangular plates with edges elastically restrained against translation and rotation.

Enhancement Seminar title : Dynamic analysis of viscoelastic structures of fractional derivative type subject to moving point load.

Extension Seminar title : Dynamic response of the plates resting on a fractionally damped viscoelastic foundation subjected to moving load.

Thesis title : Passive vibration control of continuous structures with viscoelastic foundation under dynamic and transient loads. (Tentative)

2-Yr M.Tech students (3)

1. Mr. L.S. Lingesh (2015-16) : C-2

Thesis title : Experimental vortex-induced vibration of spring mounted cylinder: achieving lock-in.

2. Mr. Mohd. Ishtiyak (2016-17) : C-2

Thesis title : Harvesting of hydrokinetic energy by enhancing-vortex induced vibration of a submerged cylinder.

3. Y. Omkar Venkata (2017-18) : C-2

Thesis title : Numerical study of vortex-induced vibration for hydro-kinetic energy extraction.

Dual degree students (BTP+MTP) (6)

1. Mr. Parag P Majumdar (2011-12)

2. Mr. Joseph D. Thekinen (2012-14) : J-3, C-4

MTP Thesis title : Rayleigh-Ritz method-based analysis of dry coupled horizontal-torsional-warping vibration of mathematical open-section containership hulls.

BTP Thesis title : Transient point load induced wet vibration of Kirchhoff’s plate with translationally constrained edges : aircraft landing on floating airports.

3. Mr. Ankit (2013-15) : J-5, C-1

MTP Thesis title : Free transverse vibration of mono-piled ocean tower.

BTP Thesis title : Dynamic analysis of a partially submerged Compliant Tower with superstructure as a non-uniform Timoshenko beam with a non-classical foundation, due to marine environmental loads.

4. Mr. Ameya Kannamwar (2013-15) : J-2, C-3

MTP Thesis title : Free dry and wet vibration of marine rudder: theoretical and numerical analysis with experimental verification.

BTP Thesis title : Free vibration of marine rudder: theoretical and numerical analysis with experimental verification.

5. Mr. Abhishek Mondal (Autumn 2016)

6. Mr. Athrey Ranjith Krishnanunni (2019-2020, Department of Aerospace Engineering) : C-2

Project title : Free vibration of wind turbine blade modeled as a tapered twisted cantilever beam with aerofoil cross-section and varying twist angle.

MTP Thesis Title : In-house design and fabrication of concentrator-augmented horizontal axis wind turbine : Wind Analysis, Concept and Basic Design, Blade Design, Component Layout Design.

B.Tech students (BTP) (16)

1. Mr. Jagram Meena (2011-12)

2. Mr. Debjyoti Besra (2011-12)

3. Mr. Mohd. Atif Siddiqui (2012-13) : J-2, C-2

Thesis title :Dynamic response of axially loaded plates with intermediate fixities to transient hydrodynamic impact loads.

4. Mr. Smarak Sikdar (2012-13)

5. Mr. Rahul Jindal (2014-15) : J-2, C-2

Thesis title : Theoretical analysis of free and forced dry and wet vibration of 2-way tapered hollow marine rudder with numerical verification.

6. Mr. Prateek Sinha (2014-15) : J-1, C-1

Thesis title : Vortex-induced vibration of a tension leg platform tendon: multi-mode limit cycle oscillations.

7. Mr. Ashish Shukla (2015-16)

Thesis title : Shock response spectrum of elastically supported circular helideck under axisymmetric impact due to helicopter landing.

8. Mr. C. Ravindra (2015-16)

Thesis title : Finite element analysis of beams with various complications : Timoshenko beam, intermediate end fixities, multi-span beams, Stepped beam, beams with concentrated masses.

9. Mr. Vishal Kumar Gupta (2017-2018)

10. Mr. Abhinav Attri (2017-18)

11. Mr. Anshuman Panda (2017-18) : J-1, C-1

12. Mr. N. Mahesh Babu (Spring 2019)

BTP Thesis title : MATLAB-based tool development of monopile-depth optimization of offshore wind turbine in Indian territorial waters.

13. Mr. Diwakar Swaroop (2019-2020, Dept. of Mechanical Engineering) : C-1

BTP Thesis Title : In-house design and fabrication of horizontal axis wind turbine : Mechanical design of Drive-train, Machinery Selection, Structural design of tower and foundation, Protection Design.

14. Mr. Hrushikesh Chambhare (2019-2020) : C-1

BTP Thesis Title : In-house design and fabrication of horizontal axis wind turbine : Composite fabrication, Planning and Production design, Economics and Operations Research.

15. Umang Agarwal (B.Tech 2020-2021). Dept. of Mechanical Engineering

BTP Thesis Title : Design and Construction of a Solar-Powered Lawn Mower : Green-Cover Study, Concept Design, Basic Design, Blade Design, Detailed Design, Construction, Operation, Cost Estimate.

16. Shivam Pandey (B.Tech 2020-2021). Dept. of Mechanical Engineering

17. Mr. Yash Goyal (B.Tech, Spring 2021), Dual Degree in Engineering Entrepreneurship.

BTP Thesis Title : Design and Construction of a Solar-Powered Pest Repellent: Basic Design, Detailed Design, Construction, Operation, Cost Estimate.

18. Mr. Jus L. Jaisinghani (B.Tech, 2021-2022), Dept. of Mechanical Engineering (Manufacturing Sc. and Engineering)

BTP Thesis Title : In-house design and fabrication of concentrator-augmented horizontal axis wind turbine: blade fabrication, drive train assembly, control systems assembly.

Internship (9)

1. Mr. I.S. Sivaraman (Summer 2019), B.Tech 2017-2021, Production Engineering, National Institute of Technology (NIT) Trichy.

Project title : Free dry and wet vibration of twisted cantilever anisotropic tapered plate with aerofoil cross-section.

2. Mr. Umang Agarwal (B.Tech 2020-2021). Dept. Of Mechanical Engineering.

Project title : Design and Construction of a Solar-Powered Lawn Mower : Green-Cover Study, Concept Design, Basic Design, Blade Design, Detailed Design, Construction, Operation, Cost Estimate.

3. Mr. Shivam Pandey (B.Tech 2020-2021). Dept. of Mechanical Engineering.

Project title : Design and Construction of a Solar-Powered Lawn Mower : Green-Cover Study, Concept Design, Basic Design, Blade Design, Detailed Design, Construction, Operation, Cost Estimate.

4. Mr. Unnikrishnan Nambiar K., Dual Degree in Financial Engineering.

Project title : Feasibility Study and Cost Analysis of Small Wind Turbine on the Coast of West Bengal : Site Assessment, Wind Data Analysis, Soil Study, Wind Farm Micro-siting, Machine Size Optimization, Cost Estimate, Business Model.

5. Mr. Siddharth Mohapatra, Dept. of Chemical Engineering.

Project title : Design and Construction of On-campus Biogas Plant : Basic Design, Detailed Design, Cylinder design, Cost Estimate, Business Model, Construction, Operation.

6. Mr. Yash Goyal, Dual Degree in Engineering Entrepreneurship.

Project title : Design and Construction of a Solar-Powered Pest Repellent: Basic Design, Detailed Design, Construction, Operation, Cost Estimate.

7. Ms. Anshika Srishti, Dept. of Chemical Engineering.

Project title : Design and Fabrication of a Fully Biodegradable Jute-Based Sanitary Pad for Rural Population : Raw material, Superabsorbent Material, Basic Design, Fabrication process, Cost Estimate, Business Model, Factory layout.

8. Mr. Abhas Sarkar, Dept. of Chemical Engineering.

9. Mr. Saumitra S. Joshi, Dept. of Mechanical Engineering.

Project title : Design and Fabrication of a Bicycle-powered road broom : Concept Design, Basic Design, Detailed Design, Construction, Operation, Cost Estimate.

10. Mr. Nirbhay. Dept. of Mechanical Engineering.

In-house design and fabrication of concentrator-augmented horizontal axis wind turbine: Drive train and nacelle assembly.

11. Mr. Pritam Das. Dept. of Electronics and Electrical Communication Engineering.

In-house design and fabrication of concentrator-augmented horizontal axis wind turbine: Design of control systems.

12. Ms. Bhaswati Sen.

In-house design and fabrication of concentrator-augmented horizontal axis wind turbine: Instrumentation.