Kerbal Engineer  (This is ROUGH and in progress and might be wrong)

Tips and Tricks  

  Short cut key :   \

  Primary VAB Data: TWR this must be above 1 when not in space 

            Delta-V This is what you look at when building your craft and what we are talking about with on the pad stats.

  Areas of use    VAB and During missions

  Why is it useful?  Kerbal Engineer (KER) is an information tool that gives you knowledge that is going on with your craft or its potential.

  Useful bits of KER:

  VAB

     Use burn:   When adding different boosters types watch burn to adjust your staging order 2 seconds is too long to carry unused weight. 

  On MISSION

     Stuff people miss:  Sorted by importance/use

IN THE VAB Look down at the bottom right of your KSP game.  See the Wrench with KER under it click on it.  Now you have a new box(or you do not because it was already there) That says "Kerbal Engineer Redux 1.0.xx.x"  if not then go download the right one here.

    Now this Box has 5 buttons BODY, Atmospheric, All stages, Settings, and Compact (If all you see is compact click it so that you can see the rest).  This  now has 9 headings and maybe a few numbers precede by an s on the side.

On Missions:   

    Edit your info:  This is a guide to making KER work for you.   None of this is hard and fast.  This is recommendations only

 1.  On the launch pad click on the Wrench with a KER under it.  This shows a bunch of buttons.

 2.  ADD kick in started flying ships went to land on the mun ( will work on later)