Plummer Block and UCF-bearing Manufactueres in India

Plummer blocks made of high-performance cast iron have excellent rigidity and are simple to manipulate. Spherical roller bearings with a high load capacity or self-aligning ball bearings can be installed in them.

They can be used with adapters and bearings with tapered bores or cylindrical bores.

Building supplies: Ductile cast iron with anticorrosive passivation and protective coating is more shock-resistant and can be used with bearings with a higher load capacity. Grey cast iron. identical dimensions Various options for sealing are available for all applications:

Plummer Block and UCF-bearing Manufactueres in India-igus

Two-lip seal: There are two parts to a double-lip seal. Four halves can be attached to the housing on both sides. Great ability to seal.

Felt seal: One seal consists of a retainer made up of two parts, a round cord made up of two parts, and an oil-prepped felt strip made up of two parts. can also be used with a seal from a V-ring. For a single housing, four felt strips, four die-cast aluminum retainer halves, and four NBR ring halves are provided for mounting on both sides.

V-ring seal: A single seal consists of a steel washer and a V-ring made of NBR rubber that has been vulcanized. As a result, each housing comes with two V-rings and two washers that can be mounted on either side of the housing.

Maze seal - One seal comprises of one cast-iron maze ring and one NBR round rope.

taconite seal: One seal has a cast-iron body, one grease nipple, one cast-iron labyrinth, two NBR rubber O-rings, and one NBR V-ring. End cover – One end cover made of steel and NBR is used in the toughest conditions due to its excellent sealing properties.

These combinations of housings and various standard seals can be made into numerous variants. Two seals are needed for a single Plummer block, or one seal and one end-cover. Plummer blocks are distinguished by: One bearing housing can be used for self-aligning ball bearings 12..., 22..., 23..., as well as spherical roller bearings of series 222... and 223... with cylindrical and tapered bores. It also has high functionality, high stiffness, and circular ribs for heat dissipation.

Plummer Block and UCF-bearing Manufactueres in India-igus

Highlights of Plummer block mounting:

Markings for mounting with four fastening bolts Markings for additional dowel pin The housing's circular ribbing provides excellent form stability and rigidity. Markings for additional dowel pin Connection bolt Alignment Markings for quick and easy alignment

Split Plummer blocks include SNN, SD3100 (under the brand NSK), SNC, SD31, SNOE, and SNOL200 (under the brand NTN-SNR). Non-split Plummer blocks include SPW/SFCW, TN200/300, and TVN 200/300 (under the brand NTN-SNR). Flanged housings include 722500 and F11200 Take-up housings Split Plummer blocks include Loiskové tolé 20–140 mm.

Housings for rolling bearings with a tapered bore, SNN/SNC series 600, series 1300K, 2300K, 21300K, and 22300K. Shaft diameter: 20–90 mm.

Housings of the SNC series 200: cylindrical bore housings for rolling bearings in the series 1200, 2200, 22200, and 23200. Size of the shaft: 25–160 mm.

Housings of the SNC series 300: cylindrical bore housings for rolling bearings in the series 1300, 2300, 21300, and 22300. Size of the shaft: 25–100 mm.