Embedded Files
Note:
The following settings are for the Dremel 3d45. These settings are still being tested with trial and error.
Post Processing Scripts
Pause at height: Set to layer height
Park Print Head X an Y set to 0
Retraction 2mm
Retraction speed 55 mm/s (This could be faster)
The following line needs to be added for the Dremel to activate its pause menu (G-Code Before Pause)
G-Code Before Pause: {IF "[current_layer_number] == 30"}G5
{IF "[current_layer_number] == 30"}G5
You will need to slice the model then use the slice slider.
Locate the layer you want the Dremel 3d45 to pause so you can change the filament.
Add the number to the Post Processing Code.
You need to add a new "Post Processing Code, for each pause.
Dremel Plugin for CURA
Dremel Plugin for CURA
Acceleration and speed
Print speed -main speed for printer and filament
Report abuse