Official Product Manual

10 Inputs

• • SDI*10

  • HDMI*1

Input No.1 is selectable between SDI and HDMI via settings on the ATEM Software Control App - Note: You cannot use both simultaneously.

Note: There is a known Hardware Failure for the ATEM SDI Input #2 and it cannot be used.   

3 Aux Outputs

• • SDI*3

Each Aux Output's source can be configured/selected from the ATEM Software Control App or from the Front Panel Buttons of the device. All 3 of these are hard routed to the inputs of the Hyperdeck Studio Mini's for discrete Camera ISO recording.

3 PGM Outputs

• • SDI*3

  • HDMI*1

Two of the the PGM Outputs are full workflow compatible whereas the 3rd PGM Out is HD only - labelled (HD)

Official Product Manual

Inputs

• • SDI*4

  • HDMI*1

  • BNC*3

  • Thunderbolt 2 Port*1

There are 4 SDI Channel Input labelled A,B,C,D, as well one HDMI input. As well as these, there are also a collection of 3 BNC inputs to represent the Analog Component/Composite input options.  As a further option a Thunderbolt 2 port is available - allowing direct uncompressed video feed/stream to your connected computer.

Outputs

• • SDI*4

  • HDMI*1

  • BNC*3

Similarly to the input section; there are 4 SDI Channels A,B,C,D, HDMI and BNC Analog Video Outputs which are intended for 'looping' your input video streams out to other devices. 

SSD Hard-Drives

• • SSD*2

Two high capacity Read/Write speed SSD drives are available for direct recording and playback of the chosen input(s) - using the 'INPUT' button on the front panel. Note these drives are 'Hot-Swappable' and data can be retrieved/copied using an 'SSD Hard-Drive to USB 3.0 Dock' available for hire at the Tech Desk.

Official Product Manual

Inputs

• • SDI*2

  • HDMI*1

  • Optical*1

There are 2 SDI Channel Input labelled A & B, as well one HDMI input. These inputs can be scaled, accessed and switched by utilising the buttons on the Front Panel. Note: Channel A has the option to choose between HDMI or SDI as an input source; Channel B is SDI only.

Outputs

• • SDI*8

  • HDMI*2

  • Optical*1

Across the various outputs we have 2 SDI and 1 HDMI 'Loop' outputs which can be utilised to send the incoming digital video stream out to other devices without processing. 

Other outputs include Post Processed Channel A & B Outputs (both SDI and HDMI) as well as 4 SDI 'QUAD 3G Outputs', which are used to output the incoming video stream out to a mosaic-style/multiple screen presentation.

Scaling & Processing

This device is used to conform incoming video streams (via HDMI/SDI/BNC etc..) to the chosen ATEM  workflows up to 2160p . The conversion happens in near real-time speeds using the low latency option in the settings. Note, however, it is not recommended for separate Video/Dialogue style workflow as the latency induced is still apparent and distracting. 

Official Product Manual

Inputs

• • SDI*1

These 3 devices have only 1 SDI input - which is used as the sole 'Live' video input stream for recording locally on to the SD Cards. 

Their input can be assigned from the ATEM Software Panel's Aux drop down menu (labelled Mini IN #1,#2,#3) - normally assigned to Camera #2,#3,#4 respectively for Camera ISO recording.

Outputs

• • SDI*2

  • HDMI*1

There are 2 SDI and 1 HDMI outputs available on these 3 devices. They can be used as a simple 'Loop' Output to other devices as well as an output pathway for recorded media on the SD cards.

Alternatively, when using both SDI outputs simultaneously, Channel A can be utilised as 'FILL' Source and the Channel B can be used as the 'KEY' Source. Such scenarios could be useful for superimposing/keying backgrounds on to 'Live' input feeds with green backgrounds or media with 'Alpha Channels'. Please enquire further with your lecturer/tech team member for information.

SD Memory Cards

• • SD Card*2

Ethernet

• • FileZilla/CyberDuck - FTP (File Transfer Protocol)

All 3 of these devices are each connected to the internal network and assigned a Static IP Address. 

On 'Computer #1' (Black Mac Pro) in the control room you can remotely access the SD Cards to upload media/content (Video, Images, Audio etc...) ready to stream out using FTP Software such as 'FileZilla', or 'CyberDuck'. 

This is a very convenient and efficient method for transferring data to and from the devices without having to remove/re-insert the SD Cards, particularly in 'Live' and 'Mission-Critical' Productions.

Outputs (Top Row)

• • SDI*8

From Left to Right:

• • • • • • BMD PCIe Decklink 4K Studio SDI Output (Computer #1 - Mac Pro)

          • PGM Mix Output ('copy of' - via the BMD Distributor inside the rack out of view)

          • Comms/IT Rack SDI Output 1

          • Comms/IT Rack SDI Output 2

          • Blank/Not Used

          • Teranex AV SDI Output Channel A

          • Teranex AV SDI Output Channel B

          • Cyclorama AUX IN A (This can be utilised for Cam #2 in the Cyclorama since the hardware failure of the physical ATEM #2 Input)

          • Cyclorama AUX IN B

Inputs (Bottom Row)

• • SDI*5

  • HDMI*2

From Left to Right:

• • • • • • BMD PCIe Decklink 4K Studio SDI Input (Computer #1 - Mac Pro)

          • BMD PCIe Decklink 4K Studio HDMI Input (Computer #1 - Mac Pro)

          • Blank/Not Used

          • Teranex AV SDI Input Channel A

          • Teranex AV HDMI Input Channel A

          • Teranex AV SDI Input Channel B

          • Blank/Not Used

          • ATEM IN #8

          • ATEM IN #9

Official Product Manual

Inputs

• • Analog Mic Input 1 - 4 - Cyclorama Mic Inputs 1-4

  • Analog Mic Input 5 (Not Used)

  • Analog Mic Input 6 - Voice of God (VoG - Routed only to the Cyclorama via AUX 1-2)

  • Stereo Input 1 - Line Audio Output - Computer #1 (MacPro Trashcan)

  • Stereo Input 2 - Line Audio Output - Computer #2 (MacPro Silver)

Outputs

• • Main Mix XLR Outputs L-R - Mixed audio is routed out to Control Room G (Line IN 5-6 PreSonus DigiMax D8)

  • Main Monitor TRS Outputs - KRK Rokit 6 G3 Monitor Speakers

  • AUX 1-2 - Routed out to the Cyclorama for SLS Talkback and Music Playback during Live Productions (AV Wall Boxes: P2 - Audio 14, P3 -  Audio 14)

2 TRACK - 'MONITOR' Button

This is probably the single most important button on this small format analog console to take note of, so pay attention and understand. 

The '2 Track' Input CONNECTION is being fed from the Blackmagic Design HyperDeck Studio Pro SSD Recorder's XLR Outputs. 

When the MONITOR button is in the DOWN position the signal sent to the speakers will be the audio from the Blackmagic Design HyperDeck Studio Pro Recorder's XLR Outputs. 

When the MONITOR button is in the UP position the signal sent to the speakers will be the mixed audio from the various inputs on the mixer itself. *L-R Main Mix Output - Yellow Faders 

IN SHORT 

• • MONITOR Button DOWN PGM Mix Output (HyperDeck Studio Pro SSD Recorder) 

  • MONITOR Button UP Mixed Audio (White/Yellow Faders)

2 TRACK - 'TO MIX' Button

This button is not used and is to remain in the UP POSITION at all times. 

DO NOT push/leave in the DOWN Position. 

Official Product Manual

• 38 Hz - 35 kHz Frequency Response

• 2.3 kHz Crossover Frequency

• 107 dB Max Peak Output

• XLR, TRS & RCA Analog Input Connector

Official Product Manual

Inputs

• • Analog XLR Comms - AUDIO DEPARTMENT - Control Room G (Listenback Only)

Outputs

• • Analog Output 1 Comms - CAMERA

  • Analog Output 2 Comms - FLOOR MANAGER

  • Analog Output 3 Comms - CUSTOM (Patchable via IT/Comms Cupboard)

  • Analog Output 4 Comms - AUDIO DEPARTMENT - Control Room G (Talkback Only)

Buttons

• Remote Mic/Kill This switch will actively shut off any active microphone that any channel is transmitting remotely.

• Link Toggle this to open or close the 'party line' for all users

• Outputs 1-4 Independently toggle each channel to communicate with the recipient.

• Call Once pressed it will force the 'Mic' button to flash on the recipient belt pack - signalling them to wear/turn on the belt-pack.

Inputs

• • HDMI 1 = ATEM Program Mix Output

  • HDMI 2 = Screen 2 Copy (of the MacPro #1 Computer - Trashcan)

This screen cannot be used as an 'Extra Desktop Screen', although HDMI Input 2 will show a mirrored copy of computer screen #2 of the MacPro Computer. 

This can be useful for presentations in the Post Edit Control, or for showcasing your work directly from your software session.

Inputs

• • HDMI 1 = ATEM Multiview Output

  • HDMI 2 = Not Currently Used (intended for Patchbay in the near future)

This screen is mounted above the Lighting and Audio Rack on the Control Room's right side. 

It can be utilised as a PVM (Personal Viewing Monitor) for the Operator of the Sound and Lighting for a show.