André Filiatrault, Ph.D., P.Eng, is a Professor in the Department of Civil, Structural and Environmental Engineering at the State University of New York at Buffalo in Buffalo, NY, USA and a Professor of Structural Engineering at the University School for Advanced Studies IUSS Pavia, Italy. He received his master’s (1985) and Ph.D. (1988) degrees in civil engineering from the University of British Columbia after obtaining his bachelor’s degree in civil engineering from Université de Sherbrooke in 1983. After a two-year stint as an assistant professor at the University of British Columbia, he joined the Department of Civil Engineering at École Polytechnique, part of Université de Montréal, where he became a full professor in 1997. Professor Filiatrault joined the faculty at the University of California, San Diego in 1998, where he was a professor of structural engineering until 2003. From 2003 to 2007, he served as the Deputy Director of the Multidisciplinary Center for Earthquake Engineering Research (MCEER). Professor Filiatrault also served as the Director of MCEER from 2008 to 2011. He is the current founding president of the International Association for the Seismic Performance Of Non-Structural-Elements (SPONSE).
His research over the last 32 years has focused on the seismic testing, analysis and design of civil engineering structures and non-structural building components. The professional achievements resulting from his research and teaching activities include four textbooks, more than 330 peer-reviewed scientific publications, the 1990 Sir Casimir Stanislaus Gzowski Medal from the Canadian Society for Civil Engineering, the 2002 Moisseiff Award from the American Society of Civil Engineers and the 2008 Outstanding Researcher/Scholar Award from the Research Foundation of the State University of New York.
[J150] Merino, R.J., Gabbianelli, D., Perrone, D. and Filiatrault, A. 2021. “Calibrated Equivalent Viscous Damping for Direct Displacement Based Seismic Design of Pallet-Type Steel Storage Racks,” Journal of Earthquake Engineering (accepted).
[J150] Steneker, P., Wiebe, L., Filiatrault, A. and Konstantinidis, D. 2021. “A Framework for the Rapid Assessment of Seismic Upgrade Viability Using Performance Based Earthquake Engineering,” Earthquake Spectra (accepted).
[J149] Perrone, D., Rodriguez, D., Filiatrault, A., Brunesi, E., Beiter, C. and Piccinin, R. 2021. “A Framework for the Quantification of Non-Structural Seismic Performance Factors,” Journal of Earthquake Engineering, DOI: https://doi.org/10.1080/13632469.2021.1991516.
[J148] Merino, R.J., Perrone, D. and Filiatrault, A. 2021. “Calibrated Equivalent Viscous Damping for Direct Displacement Based Seismic Design of Suspended Piping Trapeze Restraint Installations,” Journal of Earthquake Engineering, DOI: https://doi.org/10.1080/13632469.2021.1987357.
[J147] Rodriguez, D., Perrone, D., Filiatrault, A. and Brunesi, E. 2021. “A Probabilistic Strong Floor Motion Duration Model for Seismic Performance Assessment of Non-Structural Building Elements,” Earthquake Engineering and Structural Dynamics, 1-19, DOI: https://doi.org/10.1002/eqe.3550.
[J146] Bianchi, S., Ciurlanti, J., Perrone, D., Filiatrault, A., Campos Costa, A., Candeias, P.X, Correia, A.A. and Pampanin, S. 2021. “Shake-Table Tests of Innovative Drift Sensitive Non-Structural Elements in a Low-Damage Structural System”, Earthquake Engineering & Structural Dynamics, DOI: https://doi.org/10.1002/eqe.3452.
[J145] Filiatrault, A., Perrone, D., Merino, R.J.J. and Calvi, G.M. 2021. “Performance-Based Seismic Design of Non- Structural Building Elements,” Journal of Earthquake Engineering, 25:2, 237-269, DOI: https://doi.org/10.1080/13632469.2018.1512910.
[J144] Steneker, P., Wiebe, L. and Filiatrault, A. 2021. “Seismic Response Comparison of Steel MRFs with Yielding and Low-Damage Connections,” Journal of Constructional Steel Research, 179, 106502,1-14, DOI: https://doi.org/10.1016/j.jcsr.2020.106502.
[J143] Carofilis, W., Perrone, D., O’Reilly, G., Monteiro, R. and Filiatrault, A. 2020 “Seismic Retrofit of Existing School Buildings in Italy: Performance Evaluation and Loss Estimation,” Engineering Structures, 225, DOI: https://doi.org/10.1016/j.engstruct.2020.111243.
[J142] Chalarca, B., Filiatrault, A. and Perrone, D. 2020. “Seismic Demand on Acceleration-Sensitive Nonstructural Components in Viscously Damped Braced Frames,” ASCE Journal of Structural Engineering, 146(9), 04020190-1-14, DOI: https:///doi.org/10.1061/(ASCE)ST.1943-541X.0002770.
[J141] Steneker, P., Filiatrault, A., Wiebe, L. and Konstantinidis, D. 2020. “Integrated Structural–Nonstructural Performance-Based Seismic Design and Retrofit Optimization of Buildings,” ASCE Journal of Structural Engineering, 146(8), 04020141-1-13, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0002680.
[J140] Perrone, D., Brunesi, E., Filiatrault, A., Peloso, S., Nascimbene, R., Beiter, C. and Piccinin, R. 2020. “Seismic Numerical Modelling of Suspended Piping Trapeze Restraint Installations Based on Component Testing,” Bulletin of Earthquake Engineering, 18 (7), 3247–3283, DOI: https://doi.org/10.1007/s10518-020-00832-0.
[J139] Perrone, D., O’Reilly, G.J., Monteiro, R. and Filiatrault, A. 2020. “Assessing Seismic Risk in Typical Italian School Buildings: from In-Situ Survey to Loss Estimation,” International Journal of Disaster Risk Reduction (IJDRR), 44, DOI: https://doi.org/10.1016/j.ijdrr.2019.101448.
[J138] Perrone, D., Filiatrault, A., Peloso, S., Brunesi, E., Beiter, C. and Piccinin, R. 2020. “Experimental Seismic Performance Evaluation of Suspended Piping Restraint Installations, Bulletin of Earthquake Engineering, 18(4), 1499-1524, DOI: https://doi.org/10.1007/s10518-019-00755-5.
[J137] Perrone, D., Brunesi, E., Filiatrault, A. and Nascimbene, R. 2020. “Probabilistic Estimation of Floor Response Spectra in Masonry Infilled Reinforced Concrete Building Portfolio,” Engineering Structures, 202(1), 109842 1-18, DOI: https://doi.org/10.1016/j.engstruct.2019.109842.
[J136] Merino, R.J., Perrone, D. and Filiatrault, A. 2019. “Consistent Floor Response Spectra for Performance-Based Seismic Design of Non-Structural Elements,” Earthquake Engineering & Structural Dynamics, 49(3), 261-284, DOI: https://doi.org/10.1002/eqe.3236.
[J135] Tatarsky, M. and Filiatrault, A. 2019. “Seismic Response of Viscously Damped Braced Thin-Wall Piping System: A Proof-of-Concept Case Study,” Bulletin of Earthquake Engineering, 17(1), 537-559, DOI: https://doi.org/10.1007/s10518-018-0447-0.
[J134] O’Reilly, G.J., Perrone, D., Fox M., Lanese, I., Monteiro, R., Filiatrault, A. and Pavese, A. 2019. “System Identification and Seismic Assessment Modelling Implications for Italian School Buildings,” ASCE Journal of Performance of Constructed Facilities, 33(1), 04018089 1-18, DOI: https://10.1061/(ASCE)CF.1943- 5509.0001237.
[J132] Filiatrault, A., Perrone, D., Brunesi, E., Beiter, C. and Piccinin, R. 2018. “Effect of Cyclic Loading Protocols on the Experimental Seismic Performance Evaluation of Suspended Piping Restraint Installations,” International Journal of Pressure Vessels and Piping, 166, 61-71, DOI: https://doi.org/10.1016/j.ijpvp.2018.08.004.
[J131] Morales, E., Filiatrault, A. and Aref, A. 2018. “Seismic Floor Isolation Using Recycled Tires for Essential Buildings in Developing Countries,” Bulletin of Earthquake Engineering, 16(12), 6299-6333, DOI: https://doi.org/10.1007/s10518-018-0416-7.
[J130] O’Reilly, G.J., Perrone, D., Fox, M., Monteiro, R., and Filiatrault, A. 2018. “Seismic Assessment and Loss Estimation of Existing School Buildings in Italy,” Engineering Structures, 168,142–162, DOI: https://doi.org/10.1016/j.engstruct.2018.04.056.
[J129] Perrone, D. and Filiatrault, A. 2017. “Use of Building Information Modelling for the Automated Seismic Design of Non-structural Elements,” Journal of Automation in Construction, 84, 166-175, DOI: http://dx.doi.org/10.1016/j.autcon.2017.09.002.
[J128] Koliou, M. and Filiatrault, A. 2017. “Development of Wood and Steel Diaphragm Hysteretic Connector Database for Performance-Based Earthquake Engineering,” Bulletin of Earthquake Engineering, 15(10), 4319-4347, DOI: https://10.1007/s10518-017-0141-7.
[J127] Koliou, M., Filiatrault, A., and Kircher, C.A. 2017. “Assessing Modeling Complexities on the Seismic Performance of a Short Period Instrumented Hospital,” ASCE Journal of Performance of Constructed Facilities, 31 (1), 1-16, DOI: https://10.1061/(ASCE)CF.1943-5509.0000933.
[J126] Koliou, M., Lawson, J., Filiatrault, A. and Kelly, D.J. 2017. “Evaluation of Out-of-Plane Wall Anchorage Force Provisions in Buildings with Rigid Walls and Flexible Roof Diaphragms,” Earthquake Spectra, 33(1), 1-23, DOI: http://dx.doi.org/10.1193/121915EQS186EP.
[J125] Zhong, Z., Aref, A. and Filiatrault, A. 2017. “Numerical Simulation and Seismic Evaluation of Segmental Pipelines Rehabilitated with Cured-In-Place-Pipe Liner under Seismic Wave Propagation,” Earthquake Engineering & Structural Dynamics, 46(5), 811-829, DOI: https://10.1002/eqe.2832.
[J124] Zhong, Z., Filiatrault, A., and Aref, A. 2017. “Experimental Performance Evaluation of Pipelines Rehabilitated with Cured-In-Place-Pipe Liner under Earthquake Transient Ground Deformations,” ASCE Journal of Infrastructure Systems, 23(2), 1-16, DOI: https://10.1061(ASCE)IS 1943-555X.0000326, 04016036.
[J123] Koliou, M., van de Lindt, J.W. and Filiatrault, A. 2016. “Evaluation of an Alternative Seismic Design Approach for Rigid Wall Flexible Wood Roof Diaphragm Buildings through Probabilistic Loss Estimation and Disaggregation,” Engineering Structures, 127, 31-39.
[J122] Barrera Gutiérrez de Piñeres, M.J., Przelazloski, K., Filiatrault, A., Sullivan, T.J. and Christovasilis, I.P. 2016. “Assessment of the Loss of Functionality of Individual Rooms in Critical Facilities after Earthquakes,” Bulletin of Earthquake Engineering, 15(3), 1135-1159, DOI: https://10.1007/s10518-016-9988-2.
[J121] Koliou, M., Filiatrault, A., Kelly, D.J. and Lawson, J. 2016. “Buildings with Rigid Walls and Flexible Roof Diaphragms II: Evaluation of a New Seismic Design Approach Based on Distributed Diaphragm Yielding,” ASCE Journal of Structural Engineering, 142(3), 1-9, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0001439.
[J120] Koliou, M., Filiatrault, A., Kelly, D.J. and Lawson, J. 2016. “Buildings with Rigid Walls and Flexible Roof Diaphragms I: Evaluation of Current United States Seismic Provisions,” ASCE Journal of Structural Engineering, 142(3), 1-13, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0001438.
[J119] Koliou, M., Filiatrault, A., Kelly, D.J. and Lawson, J. 2016. “Distributed Yielding Concept for Improved Seismic Collapse Performance of Rigid Wall-Flexible Diaphragm Buildings,” ASCE Journal of Structural Engineering, 142(2), 1-16, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0001386.
[J118] Calvi, P.M., Moratti, M., and Filiatrault, A. 2016. “Studio della Risposta di Elementi Non Strutturali di edifice scolastici soggetti ad eventi sismici/ Role and Importance of Non-Structural Elements in the Seismic Vulnerability of School Buildings,” (in Italian), Progettazione Sismica, 6(3), 9-29, DOI: 10.7414/PS.6.3.9-29 – http://dx.medra.org/10.7414/PS.6.3.9-29.
[J117] Sideris, P., Aref, A. and Filiatrault, A. 2015. “Experimental Seismic Performance of a Hybrid Sliding-Rocking Bridge for Various Specimen Configurations and Seismic Loading Conditions,” ASCE Journal of Bridge Engineering, 20(11), 1-15, DOI: https://doi.org/10.1061/(ASCE)BE.1943-5592.0000742.
[J116] Soroushian, S., Zaghi, A. E., Maragakis, E. M., Echevarria, A., Tian, Y., Filiatrault, A. 2015. “Analytical Seismic Fragility of Fire Sprinkler Piping Systems with Threaded Joints,” Earthquake
Spectra, 31(2), 1125-1155.
[J115] Tian, Y., Filiatrault, A. and Mosqueda, G. 2015. “Seismic Response of Pressurized Fire Sprinkler Piping Systems I: Experimental Study,” Journal of Earthquake Engineering, 19(4), 649-673.
[J114] Tian, Y., Filiatrault, A. and Mosqueda, G. 2015. “Seismic Response of Pressurized Fire Sprinkler Piping Systems II: Numerical Study,” Journal of Earthquake Engineering, 19(4), 674-699.
[J113] Martínez-Rodrigo, M.D., and Filiatrault, A. 2015. “On the Application of Passive Control and Seismic Isolation Techniques to Cable-stayed Bridges: A Comparative Investigation through Non-linear Dynamic Analyses,” Engineering Structures, 99 (2015), 232-252.
[J112] Nicknam, A. and Filiatrault, A. 2015. “Direct Displacement-Based Seismic Design of Propped Rocking Walls,” Earthquake Spectra, 31(1), 179-196.
[J111] Soroushian, S., Zaghi, A. E., Maragakis, E. M., Echevarria, A., Tian, Y., Filiatrault, A. 2015. “Seismic Fragility Study of Fire Sprinkler Piping Systems with Grooved Fit Joints,” ASCE Journal of Structural Engineering, 141(6), 1-15. DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0001122.
[J110] Welch, D.P., Sullivan, T.J., and Filiatrault, A. 2014. “Potential of Building Information Modelling for Seismic Risk Mitigation in Buildings,” Bulletin of The New Zealand Society for Earthquake Engineering, 47 (4), 11 p.
[J109] Hamidia, M, Filiatrault, A. and Aref J. A. 2014. “Seismic Collapse Capacity Based Evaluation and Design of Frame Buildings with Viscous Dampers Using Pushover Analysis,” ASCE Journal of Structural Engineering, 141 (6), 1-12, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0001114.
[J108] Tian, Y., Filiatrault, A. and Mosqueda, G. 2014. “Experimental Seismic Fragility of Pressurized Fire Suppression Sprinkler Piping Joints,” Earthquake Spectra, 30(4), 1733-1748.
[J107] Sideris, P., Aref, A. and Filiatrault, A. 2014. “Quasi-static Cyclic Testing of a Large-Scale Segmental Column with Slip Dominant Joints,” ASCE Journal of Bridge Engineering, 19(10), 04014036-1 to 04014036-11.
[J106] Apostolakis, G., Dargush, G. and Filiatrault, A. 2014. “Computational Framework for Automated Seismic Design of Self-Centering Connections in Steel Frames,” ASCE Journal of Computing in Civil Engineering, 28(2), 170-181.
[J105] Filiatrault, A. and Sullivan, T. 2014. “Performance-based Seismic Design of Nonstructural Building Components: The Next Frontier of Earthquake Engineering,” Earthquake Engineering and Engineering Vibration, Special Issue on the State-of-the-art and Future Challenges of Earthquake Engineering, 13(1) Supplement, 17-46.
[J104] Sideris, P., Aref, A. and Filiatrault, A. 2014. ”Large-scale Seismic Testing of Hybrid Sliding-Rocking Post-tensioned Segmental Bridge System,” ASCE Journal of Structural Engineering, 140(6), 1-15, DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0000961.
[J103] Zhong, Z., Bouziou, D., Wham, B., Filiatrault, A., Aref, A., O’Rourke, T.D. and Stewart, H.E. 2014. “Seismic Testing of Critical Lifelines Rehabilitated with Cured in Place Pipeline Lining Technology,” Journal of Earthquake Engineering, 18(6), 964-985.
[J102] Sideris, P., Aref, A. and Filiatrault, A. 2014. “Effects of Anchorage Hardware on the Cyclic Tensile Response of Unbonded Monostrands,” PCI Journal Summer 2014, Precast/Prestressed Concrete Institute. 60-77.
[J101] Farhidzadeh, A., Dehghan-Niri, E., Zhong, Z., Salamone, S., Aref, A. and Filiatrault, A. 2014. “Post-Earthquake Evaluation of Pipelines Rehabilitated with Cured in Place Lining Technology using Acoustic Emission,” Construction and Building Materials 54C, 326-338.
[J100] Hamidia, M, Filiatrault, A. and Aref J. A. 2014. “Simplified Seismic Sidesway Collapse Analysis of Buildings,” Earthquake Engineering & Structural Dynamics, 43: 429-448.
[J99] Sideris, P. and Filiatrault, A. 2014. “Seismic Response of Squat Rigid Bodies on Inclined Planes with Rigid Boundaries,” ASCE Journal of Engineering Mechanics, 140(1), 149-158.
[J98] Hamidia, M, Filiatrault, A. and Aref J. A. 2013. “Simplified Seismic Sidesway Collapse Capacity Based Evaluation and Design of Frame Buildings with Linear Viscous Dampers,” Journal of Earthquake Engineering, 18(4), 528-552.
[J97] Christovasilis, I.P. and Filiatrault, A. 2013. “Numerical Framework for Nonlinear Analysis of Two-Dimensional Light-Frame Wood Structures,” Ingegneria Sismica: International Journal of Earthquake Engineering, XXX (4), 5-25.
[J96] Koliou, M., Filiatrault, A., and Reinhorn, A.M. 2013. “Seismic Response of High Voltage Transformer Bushing Systems Incorporating Flexural Stiffeners II: Experimental Study,” Earthquake Spectra, 29(4), 1353-1367.
[J95] Koliou, M., Filiatrault, A., and Reinhorn, A.M. 2013. “Seismic Response of High Voltage Transformer Bushing Systems Incorporating Flexural Stiffeners I: Numerical Study,” Earthquake Spectra, 29(4), 1335-1352.
[J94] Retamales, R., Davies, R., Mosqueda, G. and Filiatrault, A. 2013. “Experimental Seismic Fragility of Cold-Formed Steel Framed Gypsum Partition Walls,” ASCE Journal of Structural Engineering. 139(8), 1286-1293.
[J93] Retamales, R., Mosqueda, G., Filiatrault, A. and Reinhorn, A. 2011. “Testing Protocol for Experimental Seismic Qualification of Distributed Nonstructural Systems,” Earthquake Spectra, 27(3), 835-856.
[J92] Sideris, P., Filiatrault, A., Leclerc, M. and Tremblay, R. 2010. “Experimental Investigation on the Seismic Behavior of Palletized Merchandise in Steel Storage Racks,” Earthquake Spectra, 26(1), 209-233.
[J91] Filiatrault, A., Christovasilis, I.P., Wanitkorkul, A. and Van de Lindt, J.W. 2010. “Experimental Seismic Response of a Full-Scale Light-Frame Wood Building,” ASCE Journal of Structural Engineering, 136(3), 246-254.
[J90] Van de Lindt, J.W., Pei, S., Liu, H. and Filiatrault, A. 2010. “Three-Dimensional Seismic Response of a Full-Scale Light-Frame Wood Building: A Numerical Study, ASCE Journal of Structural Engineering, 136(1), 56-65.
[J89] Christovasilis, I.P., Filiatrault, A., Constantinou, M.C. and Wanitkorkul, A. 2009, “Incremental Dynamic Analysis of Woodframe Buildings,” Earthquake Engineering and Structural Dynamics 38, 477–496
[J88] Mosqueda, G., Retamales, R., Filiatrault, A. and Reinhorn, A. 2008. “Testing Facility for Experimental Evaluation of Nonstructural Components under Full-Scale Floor Motions,” Structural Design of Tall and Special Buildings, 18, 387-404.
[J87] Filiatrault, A., Higgins, P.S., Wanitkorkul, A., Courtwright, J.A. and Michael, R. 2008. “Experimental Seismic Response of Base Isolated Pallet-Type Steel Storage Racks,” Earthquake Spectra, 24(3), 617-639.
[J86] Fathali, S. and Filiatrault, A. 2008. “Effect of Elastomeric Snubber Properties on Seismic Response of Vibration-Isolated Mechanical Equipment: An Experimental Study,” Earthquake Spectra, Vo. 24, No. 2, 387-404.
[J85] Fathali, S. and Filiatrault, A. 2008 “Experimental Seismic-Performance Evaluation of Integrated Isolation/Restraint Systems for Heavy HVAC Equipment,” ASHRAE Transactions, 114, Part I, 12 p., 2008 ASHRAE Transactions Paper Award.
[J84] Wanitkorkul, A. and Filiatrault, A. 2008. “Influence of Passive Supplemental Damping Systems on Structural and Nonstructural Seismic Fragilities of a Steel Building,” Engineering Structures, 30(3), 675-682.
[J83] Filiatrault, A., Higgins, P., Wanitkorkul, A. and Courtwright, J. 2007. “Experimental Stiffness of Pallet-Type Steel Storage Rack Tier Drop Connectors,” ASCE Practice Periodical on Structural Design and Construction, 12(4), 210-215.
[J82] Ou, Y.-C, Chiewanichakorn, M., Ahn, I.-S., Aref, A., Chen, S.S, Filiatrault, A. and Lee, G. 2006. "Cyclic Performance of Precast Segmental Bridge Columns." Transportation Research Record, Journal of the Transportation Research Board. No. 1976, 66-74.
[J81] Filiatrault, A., Wanitkorkul, A., and Higgins, P. 2006. “Experimental Stiffness and Seismic Response of Pallet-Type Steel Storage Rack Connectors,” ASCE Practice Periodical on Structural Design and Construction, 11(3), 161-170.
[J80] Filiatrault, A., Bachman, R.E. and Mahoney, M.G. 2006. “Performance-Based Seismic Design of Pallet-Type Steel Storage Racks,” Earthquake Spectra, 22(1), 47-64.
[J79] Filiatrault, A. and Matt, H. 2006. “Seismic Response of High Voltage Electrical Transformer-Bushing Systems,” ASCE Journal of Structural Engineering, 132(2), 287-295.
[J78] Filiatrault, A. and Matt H. 2005. “Experimental Seismic Response of High Voltage Transformer-Bushing Systems,” Earthquake Spectra, 21(4), 1009-1026.
[J77] Bruneau, M., Engelhardt, M., Filiatrault, A., Goel, S.C., Itani, A., Hajjar, J., Leon, R., Ricles, J., Stojadinovic, B. and Uang, C-M. 2005. “Review of Selected Research on US Seismic Design and Retrofit Strategies for Steel Structures,” Journal of Progress in Structural Engineering and Materials, 7, 103-114.
[J76] Filiatrault, A., and Stearns, C. 2005. “Flexural Properties of Flexible Conductors Interconnecting Electrical Substation Equipment”, ASCE Journal of Structural Engineering, 131(1), 151-159.
[J75] Folz, B., and Filiatrault, A. 2004. “Blind Predictions of the Seismic Response of a Woodframe House: An International Benchmark Study”, Earthquake Spectra, 20(3), 825-851.
[J74] Filiatrault, A., Tremblay, R., and Kuan, S. 2004. “Generation of Floor Accelerations for Seismic Testing of Operational and Functional Building Components,” Canadian Journal of Civil Engineering, 31(4), 646-663.
[J73] Filiatrault, A., Kuan, S., and Tremblay, R. 2004. “Shake Table Testing of Bookcase – Partition Wall Systems,” Canadian Journal of Civil Engineering, 31(4), 664-676.
[J72] Folz, B., and Filiatrault, A. 2004. “Seismic Analysis of Woodframe Structures I: Model Formulation”, ASCE Journal of Structural Engineering, 130(9), 1353-1360.
[J71] Folz, B., and Filiatrault, A. 2004. “Seismic Analysis of Woodframe Structures II: Model Implementation and Verification”, ASCE Journal of Structural Engineering, 130(9), 1361-1370.
[J70] Lam, F., Filiatrault, A., Kawai, N., Nakajima, S., and Yamaguchi, N. 2004. “Performance of Timber Buildings under Seismic Load – Part 2: Modeling,” Journal of Progress in Structural Engineering and Materials, 6(1), 79-83.
[J69] Filiatrault, A., Epperson, M., and Folz, B. 2004. “Equivalent Elastic Modeling for the Direct-Displacement Based Seismic Design of Wood Structures,” Special Edition of the ISET Journal of Earthquake Technology on Performance Based Design, 41(1), 75-100.
[J68] Filiatrault, A., and Stearns, C. 2004. “Seismic Response of Electrical Substation Equipment Interconnected by Flexible Conductors”, ASCE Journal of Structural Engineering, 130(5), 769-778.
[J67] Dastous, J-B., Filiatrault, A., and Pierre, J-R. 2004. “Estimation of Displacement at Interconnection Point of Substation Equipment Subjected to Earthquakes”, IEEE Transactions on Power Delivery, Vo. 19, No. 2, 618-628.
[J66] Christopoulos, C., Léger, P., and Filiatrault, A. 2003. “Sliding Response of Gravity Dams Under Vertical Seismic Accelerations,” Journal of Earthquake Engineering and Engineering Vibration, 2(2), 189-200.
[J65] Wanitkorkul, A., Lukkunaprasit, P., and Filiatrault, A. 2003. “Friction Damped Steel Moment-Resisting Frames Subjected to Long-Distance Earthquakes: Influence of Weld Fractures”, Journal of Earthquake Engineering, 7(3), 495-510.
[J64] Tremblay, R., Archambault, M.-H., and Filiatrault, A. 2003, “Seismic Response of Concentrically Braced Steel Frames Made with Rectangular Hollow Bracing Members”, ASCE Journal of Structural Engineering, 129(12), 1626-1636.
[J63] Isoda, H., Filiatrault, A., and Folz, B. 2003. “A Case Study of Seismic Modeling and Analytical Study on Woodframe Buildings in California”, Journal of Structural and Construction Engineering, Transactions of the Architectural Institute of Japan, 653, 115-121.
[J62] Filiatrault, A., Isoda, H., and Folz, B. 2003. “Hysteretic Damping of Wood Framed Buildings,” Engineering Structures, 25(4), 461-471.
[J61] Lam, F., Filiatrault, A., Kawai, N., Nakajima, S., and Yamaguchi, N. 2002. “Performance of Timber Buildings under Seismic Loads Part I: Experimental Studies”, Journal of Progress in Structural Engineering and Materials, 4(3), 276-285.
[J60] Filiatrault, A., Fischer, D., Folz, B., and Uang C-M. 2002. “Experimental Parametric Study on the In-Plane Stiffness of Wood Diaphragms”, Canadian Journal of Civil Engineering, 29, 554-566.
[J59] Filiatrault, A., Fischer, D., Folz, B., and Uang C-M. 2002. “Seismic Testing of Two-Story Woodframe House: Influence of Wall Finish Materials”, ASCE Journal of Structural Engineering, 128(10), 1337-1345.
[J58] Christopoulos, C., Filiatrault, A., Folz, B., and Uang, C-M. 2002. “Posttensioned Energy Dissipating Connections for Moment-Resisting Steel Frames”, ASCE Journal of Structural Engineering, 128(9), 1111-1120.
[J57] Gibson, N., Filiatrault, A., and Ashford, S.A. 2002 “Impulsive Seismic Response of Bridge Column-Cap Beam Joints,” ACI Structural Journal, 99(4), 470-479.
[J56] Christopoulos, C., Filiatrault, A., and Folz, B., 2002. “Seismic Response of Self-Centering Hysteretic SDOF Systems”, Earthquake Engineering & Structural Dynamics, 31(5), 1131-1150.
[J55] Filiatrault, A., and Folz, B., 2002. “Performance-Based Seismic Design of Wood Framed Buildings”, ASCE Journal of Structural Engineering, 128(1), 39-47.
[J54] Spangler-Shortreed, J., Seible, F., Filiatrault, A., and Benzoni, G. 2001. “Characterization and Testing of the Caltrans Seismic Response Modification Devices Test System”, Philosophical Transactions of the Royal Society of London: Theme Issue on Dynamic Testing of Structures, 359(1786), 1829-1850.
[J53] Filiatrault, A., Tremblay, R., and Wanitkorkul, A., 2001. “Performance Evaluation of Passive Damping Systems for the Seismic Retrofit of Steel Moment Resisting Frames Subjected to Near Field Ground Motions”, Earthquake Spectra, 17(3), 427-456.
[J52] Filiatrault, A., and Holleran, M., 2001. “Stress-Strain Behavior of Reinforcing Steel and Concrete under Seismic Strain Rates and Low Temperatures”, Materials and Structures, 34, 235-239.
[J51] Paquette, J., Bruneau, M., and Filiatrault, A. 2001. “Out-of-Plane Seismic Evaluation and Retrofit of Turn-of-the-Century North American Masonry Walls”, ASCE Journal of Structural Engineering, 127(5), 561-569.
[J50] Folz, B., and Filiatrault, A. 2001. “Cyclic Analysis of Wood Shear Walls”, ASCE Journal of Structural Engineering, 127(4), 433-441, 2002 Leon S. Moisseiff Award Paper.
[J49] Filiatrault, A. and Kremmidas, S. 2000. “Seismic Interaction of Interconnected Electrical Substation Equipment”, ASCE Journal of Structural Engineering, 126(10), 1140-1149.
[J48] Filiatrault, A., Tremblay, R. and Kar, R. 2000. “Performance Evaluation of Friction Spring Seismic Damper”, ASCE Journal of Structural Engineering, 126(4), 491-499.
[J47] Daudey, X., and Filiatrault, A. 2000. “Seismic Evaluation and Retrofit with Steel Jackets of Reinforced Concrete Bridge Piers Detailed with Lap-Splices”, Canadian Journal of Civil Engineering, 27(1), 1-16.
[J46] Tremblay, R., Filiatrault, A. and Kremmidas, S. 1998. “Near Field Seismic Response of Steel Moment Resisting Frames Retrofitted with Passive Friction Energy Dissipating Systems”, ISET Journal of Earthquake Technology, 35(4), 243-263.
[J45] Filiatrault, A., and Tremblay, R. 1998. “Design of Tension-Only Concentrically Braced Steel Frames for Seismic Induced Impact Loading”, Engineering. Structures 20(12), 1087-1096.
[J44] Filiatrault, A., Lachapelle, E., and Lamontagne, P. 1998. “Seismic Performance of Ductile and Nominally Ductile Reinforced Concrete Moment Resisting Frames. II: Analytical study”, Canadian Journal of Civil Engineering 25(2), 342-352.
[J43] Filiatrault, A., Lachapelle, E., and Lamontagne, P. 1998. “Seismic Performance of Ductile and Nominally Ductile Reinforced Concrete Moment Resisting Frames. I: Experimental study”, Canadian Journal of Civil Engineering 25(2), 331-341.
[J42] Massicotte, B., Mossor, B., Filiatrault, A., and Tremblay, S. 1998. “Compressive Strength and Ductility of Steel Reinforced Concrete”, ACI Special Publication SP182, American Concrete Institute, Farmington Hills, MI., 23 pages.
[J41] Bondonet, G. and Filiatrault, A. 1997. "Frictional Response of PTFE Sliding Bearings at High Frequencies”, ASCE Journal of Bridge Engineering 2(4), 139-148.
[J40] Tremblay, R. and Filiatrault, A. 1997. "Seismic Performance Evaluation of Steel Moment Resisting Frames Retrofitted with Locally Reduced Beam Section Connections", Canadian Journal of Civil Engineering 24(1), 78-89.
[J39] Filiatrault, A. and Lebrun I. 1996. "Seismic rehabilitation of reinforced concrete joints by epoxy pressure injection technique", ACI Special Publication SP160-03, American Concrete Institute, Farmington Hills, MI., pp. 73-92.
[J38] Tremblay, R. and Filiatrault, A. 1996. "Seismic Impact Loading in Inelastic Tension-Only Concentrically Braced Steel Frames: Myth or Reality?" Earthquake Engineering & Structural Dynamics 25(12), 1373-1389.
[J37] Tremblay, R., Bruneau, M., Nakashima, M., Prion, H.G.L., Filiatrault, A. and DeVall R., 1996. "Seismic Design of Steel Buildings: Lessons from the 1995 Hyogo-ken Nanbu Earthquake", Canadian Journal of Civil Engineering 23(3), 727-756, Honorable Mention for the 1997 CSCE Gzowski Medal Award.
[J36] Prion, H. and Filiatrault, A., 1996. "Performance of Timber Structures during the Hyogo-Ken Nanbu Earthquake of 17 January, 1995", Canadian Journal of Civil Engineering 23(3), 652-664.
[J35] Filiatrault, A., Pineau, S., and Houde, J., 1995. "Seismic Behavior of Steel-Fiber Reinforced Concrete Interior Beam-Column Joints", ACI Structural Journal 92(5): 543-552.
[J34] Filiatrault, A., Wagner, P. and Cherry, S., 1995. "Analytical Prediction of Experimental Building Pounding", Earthquake Engineering & Structural Dynamics,” 24(8), 1131-1154.
[J33] Filiatrault, A. and Stieda, C.K.A., 1995. "Seismic Weaknesses of Residential Wood Framed Buildings: Confirmations from the January 17, 1994 Northridge Earthquake". Canadian Journal of Civil Engineering 22(2) 403-414.
[J32] Tremblay, R., Timler, P., Bruneau, M. and Filiatrault, A., 1995. "Performance of Steel Structures during the 1994 Northridge Earthquake" Canadian Journal of Civil Engineering, 22(2), 338-360.
[J31] Park, R., Billings, I.J., Clifton, G.C., Cousins, J., Filiatrault, A., Jennings, D.N., Lones, L.C.P., Perrin, N.D., Roonet, S.L., Sinclair, J., Spurr, D.D., Tanaka, H., Walker, G., 1995. "The Hyoho-ken Nanbu Earthquake of 17 January 1995, Report of the NZNSEE Reconnaissance Team", Bulletin of the New-Zealand National Society for Earthquake Engineering, 28(1), 1-98.
[J30] Tinawi, R., Filiatrault, A. and Léger, P., 1995. "Strong Motion Accelerograph Records from the 1993 Napierville Earthquake", Canadian Journal of Civil Engineering, 22(1), 190-196.
[J29] Filiatrault, A. and Cervantes, M. 1995. "Separation Between Buildings to Avoid Pounding During Earthquakes", Canadian Journal of Civil Engineering, 22(1), 164-179.
[J28] Filiatrault, A., Ladicani, K. and Massicotte, B. 1994. "Seismic Performance of Code Designed Fiber Reinforced Concrete Joints", ACI Structural Journal, 91(5), 564-571.
[J27] Katzensteiner, B., Mindess, S., Filiatrault, A. and Banthia, N., 1994. "Dynamic Tests of Steel-Fiber Reinforced Concrete Frames", Concrete International, 16(9), 57-60.
[J26] Filiatrault, A., Léger, P. and Tinawi, R., 1994. "On the Computation of the Seismic Energy in Inelastic Structures", Engineering Structures, 16(6), 425-436.
[J25] Filiatrault, A., Tremblay, S. and Tinawi, R., 1994. "A Rapid Seismic Screening Procedure for Existing Bridges in Canada", Canadian Journal of Civil Engineering, 21(4), 626-642.
[J24] Filiatrault, A., D'Aronco, D. and Tinawi, R., 1994. "Seismic Shear Demand of Ductile Cantilever Walls: A Canadian Code Perspective", Canadian Journal of Civil Engineering, 21(3), 363-376.
[J23] Filiatrault, A., Cervantes, M., Folz, B. and Prion, H., 1994. "Pounding of Buildings During Earthquake: A Canadian Perspective", Canadian Journal of Civil Engineering. 21(2), 251-265.
[J22] Tinawi, R., Sarrazin, M. and Filiatrault, A., 1993. "Influence of Soft Clays on the Response Spectra for Structures in Eastern Canada", International Journal of Soil Dynamics & Earthquake Engineering, 12, 469-477.
[J21] Filiatrault, A., 1993. Book Review "Analyse des structures - André Picard", Canadian Journal of Civil Engineering, 20(6), 1081-1082.
[J20] Cherry, S. and Filiatrault, A., 1993. "Seismic Response Control of Buildings Using Friction Dampers", Earthquake Spectra, 9(3), 447-466.
[J19] Tinawi, R., Filiatrault, A. and Doré, C. 1993. "Damage to Base of LNG Tanks from Blast Loading: Case Study, ASCE Journal of Performance of Constructed Facilities, 7(3), 148-163.
[J18] Filiatrault, A., Tinawi, R. and Massicotte, B. 1993. "Damage to Cable-Stayed Bridge during 1988 Saguenay Earthquake, II: Dynamic Analysis", ASCE Journal of Structural Engineering, 119(5), 1450-1463.
[J17] Filiatrault, A., Tinawi, R. and Massicotte, B. 1993. "Damage to Cable-Stayed Bridge during 1988 Saguenay Earthquake, I: Pseudostatic Analysis", ASCE Journal of Structural Engineering, 119(5), 1432-1449.
[J16] Tremblay, R., Stiemer, S.F. and Filiatrault, A., 1993. "Overview of Seismic Provision changes in National Building Code of Canada, 1990: Discussion", Canadian Journal of Civil Engineering, 20(4), 334-339.
[J15] Filiatrault, A. and Folz, B., 1992. "Nonlinear Earthquake Response of Structurally Interconnected Buildings", Canadian Journal of Civil Engineering, 18(4), 560-572.
[J14] Filiatrault, A., Anderson, D.L. and Devall R.H., 1992. "Effect of Weak Foundation on the Seismic Performance of Core Wall Type Buildings", Canadian Journal of Civil Engineering, 19 (3), 530-539.
[J13] Filiatrault, A., 1991. "Seismic Evaluation of Modular Office Furniture System", Earthquake Spectra, 7(4), 529-541.
[J12] Filiatrault, A. and Foschi, R.O., 1991. "Static and Dynamic tests of Timber Shear Walls Fastened with Nails and Wood Adhesive", Canadian Journal of Civil Engineering, 18(5), 749-755.
[J11] McLellan, A. and Filiatrault, A., 1991. "Discussion on a Paper by H.C. Tsai and J.M. Kelly", Earthquake Engineering & Structural Dynamics, 20(3), 293-295.
[J10] Filiatrault, A. and Foschi, R.O., 1990. "Seismic Performance of Timber Shear Walls Fastened with Wood Adhesive", Wood Design Focus, 1(4), 16-20.
[J9] Filiatrault, A., 1990. "Static and Dynamic Analysis of Timber Shear Walls", Canadian Journal of Civil Engineering, 17(4), 643-651, 1990 CSCE Gzowski Medal Award Paper.
[J8] Filiatrault, A., Folz, B. and Foschi R.O., 1990, "Finite Strip Free Vibration Analysis of Wooden Floors, ASCE Journal of Structural Engineering, 116(8), 2127-2142.
[J7] Filiatrault, A., Cherry S., and Byrne, P.M., 1990. "The Influence of Mexico City Soils on the Seismic Performance of Friction Damped and Base Isolated Structures", Earthquake Spectra, 6(2), 335-352.
[J6] Filiatrault, A. and Cherry, S., 1990. "Seismic Design Spectra for Friction Damped Structures", ASCE Journal of Structural Engineering, 116(5), 1334-1355.
[J5] Filiatrault, A., 1990, "Analytical Prediction of the Seismic Response of Friction Damped Timber Shear Walls", Earthquake Engineering & Structural Dynamics, 19(2), 259-273.
[J4] Filiatrault, A., and Cherry, S., 1989. “Parameters Influencing the Design of Friction Damped Structures”, Canadian Journal of Civil Engineering, 16(5), 753-766.
[J3] Filiatrault, A., and Cherry, S., 1989. “Efficient Numerical Modeling for the Design of Friction Damped Braced Steel Frames”, Canadian Journal of Civil Engineering, 16(3), 211-218.
[J2] Filiatrault, A. and Cherry, S., 1988. "Comparative Performance of Friction Damped Systems and Base Isolation Systems for Earthquake Retrofit and Aseismic Design”, Earthquake Engineering & Structural Dynamics, 16(3), 389-416.
[J1] Filiatrault, A. and Cherry, S., 1987. “Performance Evaluation of Friction Damped Braced Steel Frames Under Simulated Earthquake Loads”, Earthquake Spectra, 3(1), 57-78.
[S1] Carofilis, W., Perrone, D., O’Reilly, G., Monteiro, R. and Filiatrault, A. 2020 “Seismic Retrofit of Existing School Buildings in Italy: Performance Evaluation and Loss Estimation,” Engineering Structures.
[B5] Filiatrault, A., Tremblay, R., Christopoulos, C., Folz, B. and Pettinga, D. 2013. “Elements of Earthquake Engineering and Structural Dynamics - Third Edition,” Polytechnic International Press, Montreal, Canada, 874 p.
[B4] Christopoulos, C., and Filiatrault, A. 2006. “Principles of Supplemental Damping and Seismic Isolation,” IUSS Press, Istituto Universitario di Studi Superiori di Pavia, Pavia, Italy, 500 p.
[B3] Filiatrault, A. 2002. “Elements of Earthquake Engineering and Structural Dynamics - Second Edition,” Polytechnic International Press, Montreal, Canada, 405 p.
[B2] Filiatrault, A. 1998. “Elements of Earthquake Engineering and Structural Dynamics”, Polytechnic International Press, Montreal, Canada 378 p.
[B1] Filiatrault, A. 1996. "Éléments de génie parasismique et de calcul dynamique des structures", Éditions de l'École Polytechnique de Montréal, Canada, 505 p. (in French).
[M9] FEMA. 2018 “Vulnerability-Based Seismic Assessment and Retrofit of One- and Two-Family Dwellings Volume 1 – Prestandard,” FEMA P-1100, Federal Emergency Management Agency, National Institute of Building Sciences, Washington, DC, 290 p.
[M8] FEMA. 2015. “Seismic Design of Rigid Wall-Flexible Diaphragm Buildings: An Alternate Approach,” FEMA P-1026, Federal Emergency Management Agency, National Institute of Building Sciences, Washington, DC, 184 p.
[M7] FEMA. 2011. “Seismic Retrofit of Weak-Story Multi-Unit Wood-Frame Structures: A Cost Effective
Technique,” FEMA P807, Federal Emergency Management Agency, National Institute of Building Sciences, Washington, DC, 326 p.
[M6] FEMA. 2009. “Quantification of Building Seismic Performance Factors,” FEMA P695, Federal Emergency Management Agency, National Institute of Building Sciences, Washington, DC, 421 p.
[M5] Sideris, P., Aref, A., and Filiatrault, A. 2009 "Development of a Simplified Element for Seismic Analysis of Segmental Bridges", in B.H.V. Topping, L.F. Costa Neves, R.C. Barros, (Editors), "Trends in Civil and Structural Engineering Computing", Saxe-Coburg Publications, Stirlingshire, UK, Chapter 10, pp. 209-223, 2009. DOI: 10.4203/csets.22.10.
[M4] FEMA. 2007. “Interim Testing Protocols for Determining the Seismic Performance Characteristics of Structural and Nonstructural Components,” FEMA 461, Federal Emergency Management Agency, National Institute of Building Sciences, Washington, DC, 138 p.
[M3] FEMA. 2005. “Seismic Considerations for Pallet Type Steel Storage Racks and their Contents in Areas Accessible to the Public,” FEMA 460, Federal Emergency Management Agency, National Institute of Building Sciences, Washington, DC, 160 p.
[M2] Filiatrault, A., Editor. 2001. “Woodframe Project Testing and Analysis Literature Reviews”, CUREE Publication No. W-03, Consortium of Universities for Research in Earthquake Engineering, Richmond, CA.
[M1] Filiatrault, A. and Massicotte, B. 1999. "Steel Fiber Reinforced Concrete as a Potential Material for Earthquake Resisting Structures", Fiber Reinforced Concrete: Present and Future, Editors: Nemkumar Banthia, Arnon Bentur, Aftab Mufti, Canadian Society for Civil Engineering, pp. 159-187.
[C207] Kircher, C., Filiatrault, A., Pang, W., Harris, J., Kingsley, G., Shing, P.B., Berman, J., Starr, L., Tong, M., Hanson, R., Moresco, J. and Heintz, J. 2020 “Solutions to the Short-Period Building Performance Paradox,” 17th World Conference on Earthquake Engineering, 17WCEE, Sendai, Japan, Paper N° C004316, 13 p.
[C205] Clemett, N.A., Carr, A.J. and Filiatrault, A. 2020. “Contributions to the Development of Elemental Viscous Damping Models,” 17th World Conference on Earthquake Engineering, 17WCEE, Sendai, Japan, Paper N° C000729, 12 p.
[C204] Filiatrault, A., Perrone, D., Merino, R.J.J. and Calvi, G.M. 2020. “Displacement-Based Seismic Design of Non-Structural Building Elements,” 17th World Conference on Earthquake Engineering, 17WCEE, Sendai, Japan, Paper N° C002123, 12 p.
[C203] Bianchi, S., Ciurlanti, J., Perrone, D., Pampanin, S. and Filiatrault, A. 2020. “Seismic Demand and Performance Evaluation of Non-Structural Elements in a Low-Damage Building System,” 17th World Conference on Earthquake Engineering, 17WCEE, Sendai, Japan, Paper N° C003916,12 p.
[C202] Carofilis, W., Perrone, D., O’Reilly, G., Monteiro, R. and Filiatrault, A. 2020. “Seismic Retrofit of School Buildings In Italy: A Performance Evaluation and Loss Estimation,” 17th World Conference on Earthquake Engineering, 17WCEE, Sendai, Japan, Paper N° C000933, 12 p.
[C201] Steneker, P., Filiatrault, A., Wiebe, L. and Konstantinidis, D. 2020. “Optimizing the Integrated Structural and Nonstructural Seismic Retrofit of Buildings,” 17th World Conference on Earthquake Engineering, 17WCEE, Sendai, Japan, Paper N° C002201, 12 p.
[C200] Francis, T.C., Sullivan, T.J. and Filiatrault, A. 2020. “Value Case for the Use of Seismically Isolated Light-Frame Wood Buildings in New-Zealand,” 17th World Conference on Earthquake Engineering, 17WCEE, Sendai, Japan, Paper N° C000658, 12 p.
[C199] Perrone, D., Filiatrault, A., Peloso, S., Brunesi, Nascimbene, R., E., Beiter, C. and Piccinin, R. 2020. “Seismic Performance of Suspended Piping Restraint Installations,” 17th World Conference on Earthquake Engineering, 17WCEE, Sendai, Japan, Paper N° C000603, 12 p.
[C198] Merino, R.J., Perrone, D. and Filiatrault, A. 2020. “Equivalent Viscous Damping for Nonstructural Building Elements,” 17th World Conference on Earthquake Engineering, 17WCEE, Sendai, Japan, Paper N° C000113, 12 p.
[C197] Rodríguez Pacheco, D., Filiatrault, A. and Perrone, D. 2020. “A Framework for Quantifying Seismic Performance Factors for Non-Structural Elements,” 17th World Conference on Earthquake Engineering, 17WCEE, Sendai, Japan, Paper N° C000109, 12 p.
[C196] Chalarca, B., Perrone, D. and Filiatrault, A. 2020. “Earthquake Economic Losses in Moment-Resisting Steel Frames Equipped with Fluid Viscous Dampers,” 17th World Conference on Earthquake Engineering, 17WCEE, Sendai, Japan, Paper N° C000103, 12 p.
[C195] Merino, R.J., Perrone, D. And Filiatrault, A. 2019. “Force-Based vs Displacement-Based Seismic Design of Non-structural Elements,” Italian National Conference on Earthquake Engineering – ANIDIS 2019, Ascoli Piceno, Italy, 11 p.
[C194] Chalarca, B. and Filiatrault, A. 2019. “Seismic Performance of Steel Moment-Resisting Frame Retrofitted with Linear and Nonlinear Viscous Dampers,” 16th World Conference on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures, St. Petersburg, Russia, 13 p.
[C193] Perrone, D. and Filiatrault, A. 2019. “Improving the Seismic Performance of Non-Structural Elements Using Building Information Modelling,” Fourth International Workshop on the Seismic Performance of Non-Structural Elements (SPONSE), 11 p.
[C192] Chalarca, B. and Filiatrault, A. 2019. “Floor Acceleration Demand on Steel Moment Resisting Frame Buildings Retrofitted with Linear and Nonlinear Viscous Dampers,” Fourth International Workshop on the Seismic Performance of Non-Structural Elements (SPONSE), Pavia, Italy, 16 p.
[C191] Steneker, P., Wiebe, L. and Filiatrault, A. 2019. “Retrofit vs. Repair: Economic Benefits and Costs of Seismic Retrofit of Non-structural Components,” Fourth International Workshop on the Seismic Performance of Non-Structural Elements (SPONSE), Pavia, Italy, 12 p.
[C190] Perrone, D., Brunesi, D.E., Dacarro, F., Peloso, S. and Filiatrault, A. 2019. “Seismic Assessment and Qualification of Non-Structural Elements in Europe: A Critical Review,” Fourth International Workshop on the Seismic Performance of Non-Structural Elements (SPONSE), Pavia, Italy 11p.
[C189] Merino, R.J.J., Perrone, D. and Filiatrault, A. 2019. “Estimating Consistent Displacement and Acceleration Floor Response Spectra in Elastic Buildings,” Fourth International Workshop on the Seismic Performance of Non-Structural Elements (SPONSE), Pavia, Italy, 14p.
[C188] Steneker, P., Wiebe, L. and Filiatrault, A. 2019. “Steel Moment Resisting Frames with Sliding Hinge Joint Connections: Seismic Evaluation Using Various Response Indices,” 12th Canadian Conference on Earthquake Engineering (12CCEE), Quebec City, Canada, 9 p.
[C187] Blaney, C., Cobeen, C., Hortacsu, A., Anderson, T., Bourcier, V., Cochran, M., Dolan, J.D., Filiatrault, A., McDonald, B., Osteraas, J. and Pang, W. 2018. “Prestandard for Seismic Assessment and Retrofit of One- and Two-Family Dwellings (FEMA P-1100, ATC-110 Project),” Structural Engineering Association of California (SEAOC) Annual Convention, Palm Desert, CA, 11 p.
[C186] Lawson, J, Koliou, M., Filiatrault, A. and Kelly, D.J. 2018. “The Evaluation of Current Wall-to-Roof Anchorage Force Provisions for Single-Story Concrete and Masonry Buildings with Lightweight Flexible Roof Diaphragms,” Structural Engineering Association of California (SEAOC) Annual Convention, Palm Desert, CA, 13 p.
[C185] Steneker, P., Wiebe, L. and Filiatrault, A. 2018. “A Comparison of Recently Developed Analytical Models of MRF Connections,” Canadian Society of Civil Engineering Annual Conference (CSCE 2018), Fredericton, Canada, 10 p.
[C184] Perrone, D. and Filiatrault, A. 2018. “Use of Building Information Modelling for the Seismic Design of Non-Structural Elements,” 16th European Conference on Earthquake Engineering (16ECEE), Thessaloniki, Greece, 12 p.
[C183] Perrone, D. and Filiatrault, A. 2018. “Seismic Demand on Non-Structural Elements: Influence of Masonry Infills on Floor Response Spectra,” 16th European Conference on Earthquake Engineering (16ECEE), Thessaloniki, Greece, 12 p.
[C182] Steneker, P., Wiebe, L. and Filiatrault, A. 2018. “Identifying Critical Locations for Connection Ductility in Steel Moment Resisting Frames,” 11th National Conference on Earthquake Engineering (11NCEE), Los Angeles, CA. 12 p.
[C181] Kircher, C.A., Pang, W., Ziaei, E., Filiatrault, A. and Heintz, J. 2018. “Solutions to the Short-Period Building Performance Paradox,” 11th National Conference on Earthquake Engineering (11NCEE), Los Angeles, CA. 12 p.
[C180] Blaney, C., Cobeen, C., Filiatrault, A., Welch, D., Stoner, M., Pang, W. and Vincent, T. 2018. “Vulnerability Based Seismic Assessment and Retrofit of One- and Two-Family Dwellings (ATC-110 Project),” 11th National Conference on Earthquake Engineering (11NCEE), Los Angeles, CA. 12 p.
[C179] Steneker, P., Wiebe, L. and Filiatrault. 2018. “Identifying Critical Connections for the Global Performance of Steel Moment Resisting Frames,” The 9th International Conference on the Behaviour of Steel Structures in Seismic Areas (STESSA ‘18), Christchurch, New Zealand, 8 p.
[C178] Blaney, C., Cobeen, C., Filiatrault, A., Welch, D., Stoner, M., Pang, W. and Vincent, T. 2017. “Prestandard for Seismic Assessment and Retrofit of One- and Two-Family Dwellings (ATC-110 Project),” Structural Engineering Association of California (SEAOC) Annual Convention, Maui, HA, 13 p.
[C177] Perrone, D. and Filiatrault, A. 2017. “Progettazione sismica degli elementi non-strutturali mediante Building Information Modelling,” Italian National Conference on Earthquake Engineering – ANIDIS 2017, Pistoia, Italy, 8 p. (In Italian).
[C176] Kircher, C.A., Pang, W., Ziaei, E., Filiatrault, A. and Schiff, S.D. 2017. “Solutions to the Short-Period Building Performance Paradox: A Focus on Light-Frame Wood Buildings,” SEAOC Annual Convention, Structural Association of California, Maui, HA, 17 p.
[C175] O’Reilly, G.J., Sullivan, T.J. and Filiatrault, A. 2017. “Implications of a More Refined Fragility Approach in the Assessment of RC Frames,” 16th World Conference on Earthquake Engineering, Santiago, Chile, Paper No. 3705, 12 p.
[C174] Lawson, J, Koliou, M., Kelly, D.J. and Filiatrault, A. 2017. “An Alternative Procedure for the Seismic Design of Buildings with Rigid Walls / Flexible Diaphragms: FEMA P-1026,” 16th World Conference on Earthquake Engineering, Santiago, Chile, Paper No. 310, 12 p.
[C173] Koliou, M., Filiatrault, A., Kelly, D.J. and Lawson, J. 2017. “Roof Diaphragm Distributed Yielding Concept for Improved Seismic Collapse Performance of Buildings with Rigid Walls and Flexible Roof Diaphragms,” 16th World Conference on Earthquake Engineering, Santiago, Chile, Paper No. 113, 12 p.
[C172] Morales, E., Filiatrault, A. and Aref, A. 2017. “Sustainable and Low Cost Room Seismic Isolation for Essential Care Units of Hospitals in Developing Countries,” 16th World Conference on Earthquake Engineering, Santiago, Chile, Paper No. 338, 12 p.
[C171] Zhong, Filiatrault, A. and Aref, A. 2017. “Seismic Performance Evaluation of Buried Pipelines Retrofit with Cured-in-Place-Pipe Lining Technology,” 16th World Conference on Earthquake Engineering, Santiago, Chile, Paper No. 817, 12 p.
[C170] Nicknam, A. and Filiatrault, A. 2015. “Seismic Fragility Analysis of Buildings Equipped With Propped Rocking Wall Systems,” SECED 2015 Conference: Earthquake Risk and Engineering towards a Resilient World, Cambridge, UK, 10 p.
[C169] Lawson, J., Kelly, D.J., Koliou, M. and Filiatrault, A. 2014. “Evaluating Existing and Proposing New Seismic Design Provisions for Rigid Wall – Flexible Diaphragm Buildings,” SEAOC 2014 83rd Annual Convention, Structural Engineering Association of California, Indian Wells, CA, 12 p.
[C168] Pianigiani M., Cimellaro, G.P., De Stefano, M., Filiatrault, A., Przelazloski, K., Christovasilis, I.P., K., Sullivan, T.J. and Tanganelli, M. 2014. “A Comprehensive Methodology for Evaluating the Seismic Resilience of Health Care Facilities Considering Nonstructural Components and Organizational Models,” Second European Conference on Earthquake Engineering and Seismology, Istanbul, Turkey.
[C167] Nicknam, A. and Filiatrault, A. 2014. “Numerical Evaluation of Seismic Response of Buildings Equipped With Propped Rocking Wall Systems,” 10th US National Conference on Earthquake Engineering, Anchorage, Alaska, Paper ID: 594.
[C166] Welch, D.P., Sullivan, T.J. and Filiatrault, A. 2014. “Equivalent Structural Damping of Drift-Sensitive Nonstructural Building Components,” 10th US National Conference on Earthquake Engineering, Anchorage, Alaska, Paper ID: 91.
[C165] Zhong, Z., Bouziou, D., Wham, B.P., Filiatrault, A., Aref, A., O’Rourke, T.D., and Stewart, H.E. 2014. “Performance Evaluation of Water Pipelines Retrofitted With Cured In Place Pipe Liner Technology under Transient Earthquake Motions,” 10th US National Conference on Earthquake Engineering, Anchorage, Alaska, Paper ID: 490.
[C164] Lawson, J., Kelly, D.J., Koliou, M. and Filiatrault, A. 2014. “Development of Seismic Design Methodologies for Rigid Wall-Flexible Diaphragm Structures,’’ 10th US National Conference on Earthquake Engineering, Anchorage, Alaska, Paper ID: 1443.
[C163] Koliou, M., Filiatrault, A., Kelly, D.J. and Lawson, J. 2014. “Numerical Framework for Seismic Collapse Assessment of Rigid Wall-Flexible Diaphragm Structures,” 10th US National Conference on Earthquake Engineering, Anchorage, Alaska, Paper ID: 282.
[C162] Sideris, P., Aref, A., and Filiatrault, A. 2014. “Nonlinear Analysis of Hybrid Sliding-Rocking Post-Tensioned Segmental Bridges,” 10th US National Conference on Earthquake Engineering, Anchorage, Alaska, Paper ID: 1135.
[C161] Koliou M, Filiatrault A., Reinhorn, A.M. 2014. “Seismic Studies on Electrical High Voltage Transformer – Bushing Systems Incorporating Flexural Stiffeners.” 10th US National Conference on Earthquake Engineering, Anchorage, Alaska, Paper ID106.
[C160] Tian, Y, Filiatrault, A. and Mosqueda, G. 2014. “Experimental Study on the Seismic Performance of Pressurized Fire Extinguishing Sprinkler Piping Subsystems,” 10th US National Conference on Earthquake Engineering, Anchorage, Alaska, Paper ID77.
[C159] Perrone, D., Filiatrault, A., Tian, Y. and Aiello, M.A. 2013. “Seismic Fragility Analysis of Fire Sprinkler Piping System in a Hospital Building, “Vienna Congress on Recent Advances in Earthquake Engineering & Structural Dynamics 2013 - VEESD 2013, Vienna, Austria, Paper No. 158, 10 p.
[C158] Sideris, P., Aref, A., and Filiatrault, A. 2013. “Experimental Investigation of the Seismic Performance of Hybrid Sliding-Rocking Post-Tensioned Segmental Bridges,” The Seventh National Seismic Conference on Bridges & Highways – 7NSC, Oakland, CA, 12 p.
[C157] Soroushian, S., Zaghi, A.E., Maragakis, M., Echevarria, A., Tian, Y. and Filiatrault, A. 2013. “Numerical Seismic Fragility of Fire Sprinkler Piping Systems with Threaded Joints,” 10th International Conference on Urban Earthquake Engineering, Tokyo, Japan, 10 p.
[C156] Anagnostopoulou, M., Filiatrault, A. and Aref, A. 2012. “Vertical Seismic Response of a Precast Segmental Bridge Superstructure,” 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper No. 3321, 10 p.
[C155] Sideris, P., Aref, A. and Filiatrault, A. 2012. “Hybrid Sliding-Rocking Post-Tensioned Segmental Bridges: Large-Scale Quasi-Static And Shake Table Testing, “15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper No. 1090, 10 p.
[C154] Ryu, K.P., Reinhorn, A.M. and Filiatrault, A. 2012. “Full Scale Dynamic Testing of Large Area Suspended Ceiling System,” 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper No. 5474, 10 p.
[C153] Bouziou, D., Wham, B.P., O’Rourke, T.D., Stewart, H.E., Palmer, M.C., Zhong, Z., Filiatrault, A., and Aref, A. 2012. “Earthquake Response and Rehabilitation of Critical Lifelines,” 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper No. 511, 10 p.
[C152] Nicknam, A. and Filiatrault, A. 2012. “Seismic Design and Testing of Propped Rocking Wall
Systems,” 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper No. 0761, 10 p.
[C151] Mashal, M. and Filiatrault, A. 2012. “Quantification of Seismic Performance Factors for Buildings Incorporating Three-Dimensional Construction System.” 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper No. 1693, 10 p.
[C150] Martínez-Rodrigo, M.D. and Filiatrault, A. 2012. “Seismic Retrofit of a Cable-Stayed Bridge with Passive Control Techniques: A Comparative Investigation through Non-Linear Dynamic Analyses.” 15th World Conference on Earthquake Engineering, Lisbon, Portugal, Paper No. 3764. 10 p.
[C149] Pang, W., Ziaei, E. and Filiatrault, A. 2012. “A 3D Model for Collapse Analysis of Soft-story Light-Frame Wood Buildings,” 12th World Conference on Timber Engineering, Auckland, New Zealand, 7 p.
[C148] Mashal, M. and Filiatrault, A. 2012. “Quantification of Seismic Performance Factors for Buildings Incorporating Three-dimensional Construction System,” New Zealand Society for Earthquake Engineering Annual Technical Conference, Christchurch, NZ, Paper No. 106, 9 p.
[C147] Davies, R., Retamales, R., Mosqueda, G., Filiatrault, A. and Allen, D. 2012. “Effects of Cold-Formed Steel Framed Gypsum Partition Walls on the Seismic Response of A Medical Facility,” 21st International Specialty Conference on Cold Formed Steel Structures, St-Louis, Missouri, 15 p.
[C146] Filiatrault, A., French, S., Holmes, W., Hutchinson, T., Maragakis, E. and Reitherman, R. 2011. “Research on the Seismic Performance of Nonstructural Components,” Proceedings of the 2011 American Society of Civil Engineers Architectural Engineering Institute Conference, March 31-April 2, 2011, Oakland, CA, 7 p.
[C145] Koliou, M., Filiatrault, A. and Reinhorn, A.M. 2011. “Seismic Protection of Electrical Transformer-Bushing Systems Incorporating Flexural Stiffeners,” Eighth International Conference on Structural Dynamics EURODYN 2011, Leuven, Belgium, 7 p.
[C144] Mosqueda, G., Filiatrault, A., Reinhorn, A. and Retamales, R. 2010. “Full-scale Experimental Facility and Loading Protocols for Seismic Performance Assessment of Nonstructural Systems,” 2010 ASCE Structures Congress, Orlando, FL, Paper No. 584, 12 p.
[C143] van de Lindt, J.W., Rosowsky, D.V., Filiatrault, A., Symans, M.D. and Davidson, R.A. 2010. “The NEESWood Project in Review,” 9th US National & 10th Canadian Conference on Earthquake Engineering: Reaching Beyond Borders,” Toronto, Canada, Paper No. 1662, 10 p.
[C142] Sideris, P., Anagnostopoulou, M., Aref, A. and Filiatrault, A. 2010. “Seismic Performance of Precast Segmental Bridges,” 9th US National & 10th Canadian Conference on Earthquake Engineering: Reaching Beyond Borders,” Toronto, Canada, Paper No. 1499, 10 p.
[C141] Michael, R., Courtwright, J.A., Ferro, E., Filiatrault, A., Higgins, P.S. and Wanitkorkul, A. 2010. “Development of a New Base Isolation System for Seismic Isolation of Steel Pallet Storage Racks,” 9th US National & 10th Canadian Conference on Earthquake Engineering: Reaching Beyond Borders,” Toronto, Canada, Paper No. 1028, 10 p.
[C140] Filiatrault, A. and Christovasilis, I.P. 2010. “Example Application of the FEMA P695 (ATC-63) Methodology for the Collapse Performance Evaluation of Wood Light-Frame Systems,” 9th US National & 10th Canadian Conference on Earthquake Engineering: Reaching Beyond Borders,” Toronto, Canada, Paper No. 1735, 10 p.
[C139] Davis, R., Retamales, R., Mosqueda, G. and Filiatrault, A. 2010. “Effects of Nonstructural Partition Walls on the Seismic Performance of a Medical Facility,” 9th US National & 10th Canadian Conference on Earthquake Engineering: Reaching Beyond Borders,” Toronto, Canada, Paper No. 1378, 10 p.
[C138] Retamales, R., Davies, R., Mosqueda, G. and Filiatrault, A. 2010. “Experimental Seismic Fragility Assessment of Light Gauge Steel Studded Gypsum Partition Walls, “9th US National & 10th Canadian Conference on Earthquake Engineering: Reaching Beyond Borders,” Toronto, Canada, Paper No. 1376, 10 p.
[C137] Christovasilis, I.P. and Filiatrault, A. 2010. “Two-Dimensional Seismic Analysis of Multi-Story Light-Frame Wood Buildings,” 9th US National & 10th Canadian Conference on Earthquake Engineering: Reaching Beyond Borders,” Toronto, Canada, Paper No. 69, 10 p.
[C136] Tsitos, A., Mosqueda, G., Filiatrault, A., Reinhorn, A. 2010. “Experimental Investigation of the Progressive Collapse of a Steel Post-Tensioned Energy Dissipating Frame, “9th US National & 10th Canadian Conference on Earthquake Engineering: Reaching Beyond Borders,” Toronto, Canada, Paper No. 1402, 10 p.
[C135] Sideris, P., Anagnostopoulou, M., Aref, A. and Filiatrault, A. 2010. “Investigation of the Seismic Response of Precast Segmental Bridges, “8th International Conference on Short and Medium Span Bridges, Niagara Falls, Canada, 10 p.
[C134] Filiatrault, A., Mosqueda, G., Retamales, R., Davies, R., Tian, Y. and Fuchs, J. 2010. “Experimental Seismic Fragility of Steel Studded Gypsum Partition Walls and Fire Sprinkler Piping Subsystems,” 2010 ASCE Structures Congress, Orlando, FL, Paper No. 589, 12 p.
[C133] Christovasilis, I.P. and Filiatrault, A. 2010. “A Two-Dimensional Model for the Seismic Collapse Assessment of Light-Frame Wood Structures”, 2010 ASCE Structures Congress, Orlando, FL, Paper No. 374, 12 p.
[C132] Christovasilis, I.P. and Filiatrault, A. 2009. “Two-Dimensional Numerical Modeling of Light-Frame Wood Structures for Seismic Collapse Assessment,” ECCOMAS Thematic Conference “Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2009), Island of Rhodes, Greece, 24 p.
[C131] Fathali, S. and Filiatrault. 2009. “Numerical Study to Investigate the Effect of Elastomeric Snubber Properties on Seismic Response of Vibration-Isolated Nonstructural Components,” ATC&SEI Conference, Improving the Seismic Performance of Existing Buildings and Other Structures, San Francisco, CA, 11 p.
[C130] Sideris, P. and Filiatrault, A. 2009. “Dynamic Analysis of Rigid Bodies on Inclined Plane Surfaces: Application to Prediction of Merchandise Response in Steel Storage Racks under Earthquake Excitation,” ECCOMAS Thematic Conference “Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2009), Island of Rhodes, Greece, 21 p.
[C129] Sideris, P., Filiatrault, A., Leclerc, M. and Tremblay, R. 2008. “Experimental Performance Evaluation of Inclined Shelving for Steel Pallet Type Storage Racks,” 14th World Conference on Earthquake Engineering, Beijing, China, on CD-ROM.
[C128] Wang, D. and Filiatrault, A. 2008. “Shake Table Testing of a Self-Centering Post-Tensioned Steel Frame,” 14th World Conference on Earthquake Engineering, Beijing, China, on CD-ROM.
[C127] Christovasilis, I.P., Filiatrault, A. Wanitkorkul, A. 2008. “Seismic Testing of a Full-Scale Wood Structure on Two Shake Tables,” 14th World Conference on Earthquake Engineering, Beijing, China, on CD-ROM.
[C126] Tsitos, A., Mosqueda, G., Filiatrault, A. and Reinhorn, A.M. 2008. “Experimental Investigation of Progressive Collapse of Steel Frames under Multi-Hazard Extreme Loading,” 14th World Conference on Earthquake Engineering, Beijing, China, on CD-ROM.
[C125] Retamales, R., Mosqueda, G., Filiatrault, A. and Reinhorn, A.M. 2008. “Experimental Evaluation of Nonstructural Components under Full-Scale Floor Motions,” 14th World Conference on Earthquake Engineering, Beijing, China, on CD-ROM.
[C124] Aref, A.J., Warn, G.P., Sideris, P. and Filiatrault, A. 2008. “Pre-Fabricated Bridge Superstructures,” Sixth National Seismic Conference on Bridges & Highways, Charleston, SC.
[C123] Fathali, S. and Filiatrault, A. 2008. “Experimental Verification of the Static Method for Seismic Design of Vibration-Isolated HVAC Equipment,” 2008 Architectural Engineering Conference, Denver, CO.
[C122] Isoda, I., Filiatrault, A., and Christovasilis, I. P. 2008. “Collapse Analysis of Japanese Wood Houses,” 10th World Conference on Timber Engineering, Miyazaki, Japan, 7 p.
[C121] Van de Lindt, J.W., Rosowsky, D.V., Filiatrault, A., Davidson, R., and Symans, M.D. 2008. “Performance-Based Seismic Design of Mid-Rise Light-Frame Wood Buildings: An Overview of the NEESWood Project,” 10th World Conference on Timber Engineering, Miyazaki, Japan, 8 p.
[C120] Filiatrault, A., Christovasilis, I.P. and Wanitkorkul, A. 2008. “Experimental Seismic Investigation of a Full-Scale Woodframe Building,” 2008 ASCE Structures Congress, Vancouver, B.C., Paper 138, 10 p.
[C119] Filiatrault, A. and Christovasilis, I.P. 2008. “Example Evaluation of the ATC-63 Methodology for Wood Light-Frame System,” 2008 ASCE Structures Congress, Vancouver, B.C., Paper 053, 10 p.
[C118] Filiatrault, A., Christovasilis, I.P. and Wanitkorkul, A. 2007. “Seismic Testing of a Full-Scale Woodframe Building,” 2007 SEAOC Convention, Squaw Creek, CA, 239-249.
[C117] Van de Lindt, J., Filiatrault, A., Symans, M.D., Rosowsky, D.V. and Davidson, R.A. 2007. “Towards a Performance-Based Seismic Design Procedure for Woodframe Construction,” 9th Canadian Conference in Earthquake Engineering, Ottawa, Ontario.
[C116] Filiatrault, A., Wanitkorkul, A., Christovasilis, I.P., van de Lindt, J., Symans, M., Roswosky, D. and Davidson, R. 2007. “Experimental Seismic Performance Evaluation of a Full-Scale Woodframe Building,” SEI Structures Congress, Structural Engineering Institute, Long Beach, CA, 8 p., on CD-ROM.
[C115] Mosqueda, G., G., Retamales, R., Filiatrault, A., and Reinhorn, A. 2006. “Experimental Evaluation Study of Nonstructural Components under Full-Scale Floor Motions,” 4th International Conference on Earthquake Engineering, Taipei, Taiwan, 8 p.
[C114] Van de Lindt, J.W., Rosowsky, D.V., Filiatrault, A., Symans, M., and Davidson, R. 2006. “Development of a Performance-Based Seismic Design Philosophy for Mid-Rise Woodframe Construction: Progress on the NEESWood Project,” 9th World Conference on Timber Engineering, Portland, OR, 8 p., on CD-ROM.
[C113] Filiatrault, A., Christovasilis, I., Wanitkorkul, A., and Folz, B. 2006. “Displacement-Based Seismic Design of Light-Frame Wood Buildings,” 9th World Conference on Timber Engineering, Portland, OR, 8p. on CD-ROM.
[C112] Filiatrault, A, Bruneau, M., Alesch, D, Constantinou, M., Dargush, G., Grigoriu, M., Lee, G., Maragakis, M., Mosqueda, G., Petak, W., Reinhorn, A., and von Winterfeldt, D. 2006. 2006. “Enhancing the Resilience of Acute Care Facilities: An Overview of MCEER Research,” 8th National Conference on Earthquake Engineering, San Francisco, CA, Paper No. 8NCEE-002034.
[C111] Kong, D., Schiff, A., Reinhorn, A., and Filiatrault, A. 2006. “Seismic Performance of Porcelain Station Post Insulators,” 8th National Conference on Earthquake Engineering, San Francisco, CA, Paper No. 8NCEE-001616.
[C110] Retamales, R., Mosqueda, G., Filiatrault, A., and Reinhorn, A. 2006. “Experimental Study on the Seismic Behavior for Nonstructural Components Subjected to Full-Scale Floor Motions,” 8th National Conference on Earthquake Engineering, San Francisco, CA, Paper No. 8NCEE-001359.
[C109] Wanitkorkul, A., Halldorsson, B., Papageorgiou, A., and Filiatrault, A. 2006. “Application of the Specific Barrier Model to the Seismic Fragility Assessment of Critical Facilities,” 8th National Conference on Earthquake Engineering, San Francisco, CA, Paper No. 8NCEE-002227.
[C108] Filiatrault, A., Bachman, R.E, and Mahoney, M. 2006. “Performance-Based Earthquake Engineering of Pallet-Type Steel Storage Racks,” 8th National Conference on Earthquake Engineering, San Francisco, CA, Paper No. 8NCEE-000116.
[C107] Mosqueda, G., Retamales, R., Filiatrault, F., and Reinhorn, A.M. 2005. “Seismic Behavior of Nonstructural Partition Walls Subjected to Full-Scale Floor Motions,” 2005 Asian-Pacific Network of Centers for Earthquake Engineering Research (ANCER) Annual Meeting, Jeju, Korea.
[C106] Filiatrault, A., Aref, A., Bruneau, M., Constantinou, M., Lee, G., Reinhorn, A., Whittaker, A., 2004. “MCEER’s Research on the Seismic Response Modification of Structural and Non-Structural Systems and Components in Hospitals”, International Conference in Commemoration of 5th Anniversary of the 1999 Chi-Chi Taiwan Earthquake, Taipei, September 2004 - on CD-ROM - also presented/published in Structural Engineers Association of California 2004 Convention, Monterey, California, August 2004, pp.73-81
[C105] Folz, B., and Filiatrault, A. 2004. “Simplified Seismic Analysis of Woodframe Structures,” Paper #245, 13th World Conference on Earthquake Engineering, Vancouver, Canada, on CD-ROM.
[C104] Beraldin, J., Latouche, C., El-Hakim, S., and Filiatrault, A. 2004. “Applications of Photogrammetric and Computer Vision Techniques in Shake Table Testing,” Paper #3458, 13th World Conference on Earthquake Engineering, Vancouver, Canada, on CD-ROM.
[C103] Van Den Einde, L., Restrepo, J., Conte, J., Luco, E., Seible, F., Filiatrault, A., Clark, A., Johnson, A., Graham, M., and Thoen, B. 2004. “Development of The George E. Brown Jr. Network for Earthquake Engineering Simulation (NEES) Large High Performance Outdoor Shake Table at The University of California, San Diego. 2004. Paper #3281, 13th World Conference on Earthquake Engineering, Vancouver, Canada, on CD-ROM.
[C102] Lukkunaprasit, P., Wanitkorkul, A., and Filiatrault, A. 2004. “Performance Deterioration of Slotted-Bolted Connection Due to Bolt Impact and Remedy by Restrainers,” Paper #1986, 13th World Conference on Earthquake Engineering, Vancouver, Canada, on CD-ROM.
[C101] Filiatrault, A., J. Restrepo, J., and Christopoulos, C. 2004. “Development of Self-Centering Earthquake Resisting Systems,” Paper #3393, 13th World Conference on Earthquake Engineering, Vancouver, Canada, on CD-ROM.
[C100] Kuan, S., Filiatrault, A., and Tremblay, R. 2003. “Seismic Behaviour of Free-Standing Bookcases and Partition Wall-Bookcase Systems,” ATC-29-2 Seminar on Seismic Design, Performance, and Retrofit of Nonstructural Components in Critical Facilities, Newport Beach, CA, 161-174.
[C99] Filiatrault, A., Restrepo, J., and Christopoulos, C. 2003. “Structural Self-Centering Earthquake-Resisting Systems,” 2003 SEAOC Convention, Squaw Creek, CA, 165-173.
[C98] Filiatrault, A., and Stearns, C. 2003. “An Experimental Study on the Seismic Response of Electrical Substation Equipment Interconnected by Flexible Conductors”, Sixth U.S. Conference and Workshop on Lifeline Earthquake Engineering, Long Beach, CA, 667-676.
[C97] Dastous, J-B., Filiatrault, A., and Pierre, J-R. 2003. “Seismic Displacement at Interconnection Points of Substation Equipment”, Sixth U.S. Conference and Workshop on Lifeline Earthquake Engineering, Long Beach, CA, 597-606.
[C96] Matt, H., and Filiatrault, A. 2003. “Seismic Response of High Voltage Transformer”, Sixth U.S. Conference and Workshop on Lifeline Earthquake Engineering, Long Beach, CA, 647-656.
[C95] Christopoulos, C., and Filiatrault, A. 2003. “Direct Displacement-Based Design and Seismic Response of Post-Tensioned Energy Dissipating Steel Frames,” Fourth International Conference on Behaviors of Steel Structures in Seismic Areas – STESSA 2003, Naples, Italy, 6 p.
[C94] Christopoulos, C., and Filiatrault, A. 2003. “Post-Tensioned Energy Dissipating (PTED) Steel Frames for Seismic Regions, “ASCE Structures Congress, Seattle, WA. Paper #392, on a CD-ROM, 3 p.
[C93] Filiatrault, A. 2003. “Performance of Non-Structural Components during the February 28, 2001 Nisqually (Seattle-Olympia) Earthquake,” ASCE Structures Congress, Seattle, WA. Paper #285, on a CD-ROM, 12 p.
[C92] Filiatrault, A., and Holleran, M. 2002. “Characteristics of Reinforced Concrete Bridge Components under Seismic Strain Rates and Low Temperatures,” 18th US-Japan Bridge Engineering Workshop, St-Louis, MI, 49-63.
[C91] Filiatrault, A., Folz, B., and Isoda, H. 2002.”Direct Displacement-Based Seismic Design for North American Wood Frame Buildings,” Structural Engineering World Congress-SEWC 2002, Yokohama, Japan.
[C90] Filiatrault, A., and Kremmidas, S. 2002.” An Experimental Study on the Dynamic Interaction of Interconnected Electrical Substation Equipment during Earthquakes”, Structural Engineering Institute Specialty Conference on the Design, Maintenance, and Constructability of Electrical Transmission Line and Substation Structures, Omaha, Nebraska, 411-419.
[C89] Filiatrault, A., and Folz, B. 2002. “Direct Displacement-Based Seismic Design of Wood Framed Buildings”, 7th US National Conference on Earthquake Engineering, Boston, Mass. Paper 00092, 10 p., on CD-ROM.
[C88] Christopoulos, C., Filiatrault, A., and Uang, C-M. 2002. “Behavior of Steel Moment Resisting Frames with Post-Tensioned Energy Dissipating Connections,” 7th US National Conference on Earthquake Engineering, Boston, Mass. Paper 00031, 10 p., on CD-ROM.
[C87] Christopoulos, C., and Filiatrault, A. 2002. “Seismic Response of Post-Tensioned Energy Dissipating Moment Resisting Steel Frames “, 12th European Conference on Earthquake Engineering, London, UK, Paper No. 61, on CD-ROM.
[C86] Filiatrault, A., Uang, C-M., and Seible, F. 2002 “CUREE-Caltech Woodframe Project – Element 1: Testing and Analysis Program”, ASCE Structures Congress, Denver, CO. 317-318.
[C85] Filiatrault, A., Gibson, N., and Ashford, S.A. 2001. “Impulsive Seismic Performance Testing of Reinforced Concrete Bridge Column-Cap Beam Joints”, 17th US-Japan Bridge Engineering Workshop, Tsukuba, Japan, 14 p.
[C84] Christopoulos, C., Filiatrault, A., Uang, C-M., and Folz, B. 2001.”A Post-Tensioned Energy-Dissipating Connection for Moment-Resisting Steel Structures in Seismic Zones, First International Conference on Steel & Composite Structures (ICSCS’01), Pusan, Korea, 2, 1621-1628.
[C83] Filiatrault, A., Fischer, D., Folz, B., and Uang, C-M. 2001. “Shake Table Testing of a Full-Scale Two-Story Woodframe House”, ASCE Structures Congress, Washington, DC, 8 p., on CD-ROM.
[C82] Filiatrault, A., and Cobeen, K. 2000. “Earthquake Performance of Woodframe Structures A Progress Report on the CUREe-Caltech Woodframe Project”, 69th SEAOC Convention, Vancouver, BC, Canada, 10 p.
[C81] Cobeen, K., and Filiatrault, A. 2000. “The CUREe-Caltech Woodframe Project in California: Testing and Analysis to Mitigate Earthquake Damage on Woodframe Construction”, Second Annual Conference on Durability and Disaster Mitigation in Wood-Frame Housing, Madison, WI.
[C80] Tinawi, R., Tremblay, R., Filiatrault, A., Massicotte, B., and Leger, P., 2000. “Research at Ecole Polytechnique on the Seismic Response of Bridges”, Canada-Taiwan Workshop on Bridges, Banff, Alberta, Canada.
[C79] Filiatrault, A., Uang, C-M, and Seible, F., 2000. “Ongoing Seismic Testing and Analysis Program in the CUREe-Caltech Woodframe Project in California”, World Conference on Timber Engineering – WCTE 2000, Whistler Resort, British Columbia, Canada, Paper 7.1.4, 8 p., on CD- ROM.
[C78] Christopoulos, C., and Filiatrault, A. 2000. “Non-Invasive Passive Energy Dissipation Systems for the Seismic Design and Retrofit of Steel Structures”, Third International Conference on Behaviors of Steel Structures in Seismic Areas – STESSA 2000, Montreal, Canada , 387-394.
[C77] Filiatrault, A., Uang, C-M., and Seible, F. 2000. “Ongoing Seismic Testing and Analysis Program of the CUREe-Caltech Woodframe Project”, ASCE Structures Congress, Philadelphia, Pa., 8 p., on CD-ROM.
[C76] Christopoulos, C., Léger, P. and Filiatrault, A. 2000. “Generation of Vertical Accelerations for Seismic Sliding Response of Gravity Dams”, 12th World Conference on Earthquake Engineering, Auckland, New Zealand, Paper No. 126, on CD-ROM.
[C75] Tremblay, R., Bérair, T.R., and Filiatrault, A. 2000. “Experimental Behaviour of Low-Rise Steel Buildings with Flexible Roof Diaphragms”, 12th World Conference on Earthquake Engineering, Auckland, New Zealand, Paper No. 2567, on CD-ROM.
[C74] Seible, F., Benzoni, G., Filiatrault, A., Post, T., and Mellon, D. 2000. “Performance Validation of Large Seismic Response Modification Devices”, 12th World Conference on Earthquake Engineering, Auckland, New Zealand, Paper No. 1154, on CD-ROM.
[C73] Filiatrault, A., Kremmidas, S., Seible, F., Clark, A.J., Nowak, R., and Thoen, B.K. 2000. “Upgrade of First Generation Uniaxial Seismic Simulation System with Second Generation Real-Time Three-Variable Digital Control System”, 12th World Conference on Earthquake Engineering, Auckland, New Zealand, Paper No. 1674, on CD-ROM.
[C72] Seible, F., Filiatrault, A., Benzoni, G., and Post, T. 1999. “Performance Validation of Large Seismic Response Modification Devices”, 1999 International Association for Bridge and Structural Engineering Symposium, Rio de Janeiro.
[C71] Filiatrault, A., and Kremmidas, S. 1999. “Seismic Behavior of Steel Moment-Resisting Frames Retrofitted with Passive Friction Energy Dissipating Systems Under Near-Fault Ground Motions”, Eight Canadian Conference On Earthquake Engineering, Vancouver, B.C., pp. 379-384.
[C70] Bruneau, M., Filiatrault. A., and Paquette, J. 1999. “Out-of-Plane Seismic Behavior of Brick Masonry Walls of Typical Turn-of-the-Century North American Residential Buildings”, ASCE Structures Congress, New Orleans, pp. 117-120.
[C69] Christopoulos, C., Filiatrault, A., Léger, P. 1999. “Effects of Near-Fault Vertical Seismic Accelerations on the Response of Steel Moment-Resisting Frames”, Eight Canadian Conference on Earthquake Engineering, Vancouver, B.C., pp. 293-298.
[C68] Filiatrault, A., Holleran, M., and Massicotte, B. 1998. “Seismic Behaviour of Reinforced Concrete Bridge Piers in eastern North America under Simulated Winter Conditions”, 5th International Conference on Short and Medium Span Bridges, Calgary, Alberta, Canada, Paper V-075, 12 p.
[C67] Christopoulos, C., Filiatrault, A., and Léger, P. 1998. “Effects of Near-Fault Vertical Seismic Accelerations on the Response of Steel Moment-Resisting Frames”, 1998 CUREE Annual Meeting, Los Angeles, CA.
[C66] Bondonet, G, and Filiatrault, A. 1998. “Development of a Novel Base Isolation System for Bridges in Canada”, Eleventh European Conference on Earthquake Engineering, Paris, France, 369 – (on a CD Rom).
[C65] Filiatrault, A., Léger, P., Massicotte, B., Tinawi, R., and Tremblay, R. 1998. “Experimental Research Using the Earthquake Simulation Facility at École Polytechnique in Montreal”, 1998 CSCE Annual Conference, Halifax, NS.
[C64] Filiatrault, A., Lachapelle, E., and Lamontagne, P., 1998. “Seismic Behaviour of Ductile and Nominally Ductile Reinforced Concrete Moment Resisting Frames,” Sixth U.S. National Conference on Earthquake Engineering, Seattle, Wash., (on a CD ROM).
[C63] Kar, R., Filiatrault, A. and Tremblay, R., 1998. “Energy Dissipation Device for Seismic Control of Structures”, Sixth U.S. National Conference on Earthquake Engineering, Seattle, Wash., (on a CD Rom)
[C62] Filiatrault, A., and Tremblay, R., 1998. “Seismic Retrofit of Steel Moment Resisting Frames with Passive Energy Dissipating Systems”, NEHRP Conference and Workshop on Research on the Northridge, California Earthquake of January 17, 1994, California Universities for Research in Earthquake Engineering (CUREe), Richmond, California, Vol. III-B, 1998, pp. III-554 -- III-561.
[C61] Tremblay, R., Tchebotarev, N., and Filiatrault, A., 1997. “Influence of the Loading Rate and the Floor Slab on the Seismic Performance of RBS Connections for Steel Moment Resisting Frames”, NEHRP Conference and Workshop on Research on the Northridge, California Earthquake of January 17, 1994, California Universities for Research in Earthquake Engineering (CUREe), Richmond, California, Vol. III-B, 1998, pp. III-722 -729.
[C60] Filiatrault, A., Holleran, M., Massicotte, B., 1997. “Comportement sismique des piliers de ponts en béton armé en conditions hivernales au Québec”, 4ième Colloque sur la progression de la recherche Québécoise sur les ouvrages d’art, Québec.
[C59] Tremblay, R., Robert, N., and Filiatrault, A., 1997. “Tension-Only Bracing: A Viable Earthquake Resistant System for Low Rise Buildings?,” Fifth International Colloquium on stability and Ductility of Steel Structures, Nagoya, Japan, Vol. 2, pp. 1163-1170.
[C58] Tremblay, R., Tchebotarev, N., and Filiatrault, A., 1997. “Seismic Performance of RBS Connections for Steel Moment Resisting Frames: Influence of Loading Rate and Floor Slab”, Second International Conference on Behaviour of Steel Structures in Seismic Areas - STESSA ‘97, Kyoto, Japan, pp. 664-671.
[C57] Filiatrault, A., Mitchell, D., and Paultre, P., 1997. “Cooperative Seismic Research Program at École Polytechnique de Montréal, McGill University and Université de Sherbrooke”, 1997 CSCE Annual Conference, Sherbrooke, QC, Vol. 4, pp. 269-277.
[C56] Tchebotarev, N., Tremblay, R., and Filiatrault, A., 1997. “Loading Rate Effects and Influence of Floor Slab on the Seismic Performance of RBS Connections for Steel Moment Resisting Frames”, 1997 CSCE Annual Conference, Sherbrooke, QC, Vol. 4, pp. 419-428.
[C55] Filiatrault, A., Lachapelle, E., and Lamontagne, P., 1997. "Shake Table Tests of Ductile and Nominally Ductile Reinforced Concrete Moment Resisting Frames", 1997 CSCE Annual Conference, Sherbrooke, QC, Vol. 4, pp. 279-288.
[C54] Massicotte, B., Mossor, B., Filiatrault, A., and Tremblay, S., 1997. “Compressive Strength and Ductility of Steel Fiber Reinforced Concrete Columns”. ACI Spring Convention, Seattle, Wash.
[C53] Filiatrault, A. and Tremblay, R., 1996. "Behaviour of Tension-Only Concentrically Braced Steel Frames Under Simulated Earthquake Loads", International Conference on Advances in Steel Structures ICASS'96, Hong Kong, Vol. II, pp. 1047-1052.
[C52] Filiatrault, A. and Tremblay, R., 1996. "Code Compatible Design Ground Motions for Inelastic Structural Analyses in Canada", Pan Pacific Hazards '96 Conference, Vancouver, Canada, on a CD-ROM.
[C51] Filiatrault, A. and Massicotte, B., 1996. "Potential Seismic Applications of Steel Fiber Reinforced Concrete: A Capacity Design Approach", Advanced Composite Materials for Bridges and Structures ACMBS-II Conference, Montreal, pp. 375-382.
[C50] Tremblay, R. and Filiatrault, A., 1996. "Shake Table Tests of Retrofitted Steel Moment Resisting Frames", 1996 CSCE Annual Conference, Edmonton, Al, Vol. IIb, pp. 901-912.
[C49] Filiatrault, A., Tremblay, R., Thoen, B.K. and Rood, J., 1996."A Second Generation Earthquake Simulation System in Canada: Description and Performance Evaluation", 11th World Conference on Earthquake Engineering, Acapulco, Mexico, Paper # 1204 on CD ROM.
[C48] Bondonet, G. and Filiatrault, A., "Shape-Memory Alloy for the Seismic Isolation of Bridges", 1996. 11th World Conference on Earthquake Engineering, Acapulco, Mexico, Paper # 1443 on a CD ROM.
[C47] Filiatrault, A., Wagner, P. and Cherry, S. "An Experimental Investigation on the Seismic Pounding of Buildings", 1996. 11th World Conference on Earthquake Engineering, Acapulco, Mexico, Paper # 2105 on a CD ROM.
[C46] Carr, A.J., Moss, P.J. and Filiatrault, A., 1995. "Pounding of Adjacent Structures During Earthquakes: A Review of the Current State of Knowledge", New Zealand National Society for Earthquake Engineering Annual Conference, Rotorua, NZ.
[C45] Tremblay, R., Archambault, M-H and Filiatrault, A., 1995. "Seismic Behavior of Ductile Concentrically Steel X-Bracings", 7th Canadian Conference on Earthquake Engineering, Montreal, pp. 549-556.
[C44] Carr, A.J., Moss, P.J. and Filiatrault, A., 1995. "Pounding of Adjacent Structures During Earthquakes: A Review of the Current State of Knowledge", 7th Canadian Conference on Earthquake Engineering, Montreal, pp. 221-228.
[C43] Katzensteiner, B.O. and Filiatrault, A., 1995. "Hysteretic Behaviour of Steel Fiber-Reinforced Concrete Frames", 7th Canadian Conference on Earthquake Engineering, Montreal, pp. 485-492.
[C42] Filiatrault, A., Massicotte, B. and Houde, J., 1995. "Application of Steel Fiber Reinforced Concrete in Aseismic Design of Beam-Column Joints", 2nd University-Industry Workshop on Fiber Reinforced Concrete, Toronto, pp. 303-317.
[C41] Filiatrault, A., Wagner, P., Cherry, S. and Ventura, C.E., 1994. "A Shake Table Study on the Pounding of Buildings during Earthquakes", 5th U.S. National Conference on Earthquake Engineering, Chicago, Ill., Vol. II, pp. 671-680.
[C40] Pineau, S., Filiatrault, A. and Houde, J., 1994. "Seismic Behaviour of Fiber Reinforced Concrete Beam-Column Joints", 1994 CSCE Annual Conference, Winnipeg, Man., pp. 541-550.
[C39] Cherry, S. and Filiatrault, A. 1993. "Some Seismic Studies of Friction Damped Structures", Proceedings, 17th European Regional Earthquake Engineering Seminar for Young Scientists and Designers, Haifa, Israel, 19 pp.
[C38] Tremblay S., Filiatrault, A. and Tinawi, R., 1993. "A Method for Screening Existing Bridges for Seismic Evaluation in Canada", 1993 CSCE Annual Conference, Fredericton, N.B., Vol. II, pp. 115-124.
[C37] Ladicani, K., Filiatrault, A. and Massicotte, B., 1993. "Cyclic Tests of Steel Fiber Reinforced Concrete Exterior Beam - Column Joints", 1993 CSCE Annual Conference, Fredericton, N.B., Vol. II, pp. 493-502.
[C36] Tinawi, R., Filiatrault, A. and Sarrazin, M., 1993. "Response Spectra for Structures on Soft Soils in Eastern North America", SDEE-93, 6th International Conference on Soil Dynamics & Earthquake Engineering, Bath, U.K., pp. 705-718.
[C35] Filiatrault, A., Tinawi, R., Felber, A., Ventura, C.E. and Stiemer, S.F., 1993. "Modal Analysis and Testing of the Cable-Stayed Shipshaw Bridge in Jonquiere, Quebec", 11th International Modal Analysis Conference, Kissimmee, Flo. pp. 8-18.
[C34] Tinawi, R., and Filiatrault, A., 1992. "Torsional Periods of Symmetric Structures: A Simplified Rayleigh Approach", 2nd Canadian Conference on Computing in Civil Engineering, Ottawa, Ont.
[C33] Filiatrault, A., Tinawi, R., and Léger, P., 1992. "The Use of Energy Balance in Nonlinear Seismic Analysis", 10th World Conference on Earthquake Engineering, Madrid, Spain, pp. 4111-4116.
[C32] Katzensteiner, B., Filiatrault, A., Mindess, S. and Banthia, N., 1992. "Use of Steel Fibrous Concrete in Seismic Design", 4th RILEM International Symposium on Fibre Reinforced Cement and Concrete, University of Sheffield, England.
[C31] Cherry, S., and Filiatrault, A., 1992. "The Use of Friction Dampers in the Seismic Design and Retrofit of Buildings", European Joint Conference on Engineering Systems Design & Analysis, Istanbul, Turkey.
[C30] Filiatrault, A., and Fontaine, S., 1992. "Simulation d'une activité de recherche dans un cours de deuxième cycle: Une étude de cas à l'Ecole Polytechnique de Montréal", C2EI Conference Canadienne sur l'Education en Ingénierie, Québec, pp. 214-220.
[C29] Filiatrault, A., Tinawi, R. and Massicotte, B., 1992. "Performance of the Shipshaw Bridge during the November 25, 1988 Saguenay Earthquake", 1992 CSCE Annual Conference, Quebec City.
[C28] Filiatrault, A., Tinawi, R., and Doré, C., 1992. "Effect of Blast Loading on Liquefied Tank Bases: A Case Study", ASCE Structural Congress X, San Antonio, Texas, pp. 202-205.
[C27] Filiatrault, A., 1991. "A Simple Model for the Seismic Analysis of Timber Shear Walls", PCEE-91 Pacific Conference on Earthquake Engineering, Auckland, New Zealand, pp. 359-369.
[C26] Filiatrault, A. and Folz B., 1991. "Seismic Analysis of Structurally Interconnected Steel Frames", 6th Canadian Conference on Earthquake Engineering, Toronto, pp. 125-132.
[C25] Penn, M., Filiatrault, A., Foschi, R.O. and Cherry, S., 1991. "A Microcomputer Software Package for Shake Table Testing", 6th Canadian Conference on Earthquake Engineering, Toronto, Canada, pp. 351-358.
[C24] Filiatrault, A., 1991. "Friction Damping for the Aseismic Design of Buildings: The Canadian Experience", International Meeting on Earthquake Protection of Buildings, Ancona, Italy, pp. 21/D-39/D.
[C23] Tremblay, R., Stiemer, S., Filiatrault, A., and Prion, H.G.L., 1991. "Aspects of the Seismic Design of Concentrically Braced Steel Frames", 1991 CSCE Annual Conference, Vancouver, B.C., Vol. III, pp. 315-324.
[C22] Cherry, S., and Filiatrault, A., 1991. "The Use of Friction Dampers in the Seismic Design and Retrofit of Buildings", STREMAH IX - Structural Studies, Repairs and Maintenance of Historical Buildings, Seville, Spain, Vol. 22, pp. 101-119.
[C21] Tremblay, R., Prion, H.G.L., Stiemer, S.F., and Filiatrault, A., 1991. "Seismic Behaviour of Concentrically Braced Steel Frames", Structural Stability Research Council 1991 Annual Technical Session and Meeting, Chicago, IL.
[C20] Cherry, S. and Filiatrault, A., 1990. “An Energy Based Simplified Seismic Design Procedure for Friction Damped Braced Frames” The ASCE Structures Congress, Baltimore.
[C19] Dolan, J.D. and Filiatrault, A., 1990. "A Mathematical Model to Predict the Steady-State Response of Timber Shear Walls", 1990 International Timber Engineering Conference, Tokyo, Japan.
[C18] Filiatrault, A., Foschi, R.O. and Folz, B., 1990. "Reliability of Timber Shear Walls under Wind and Seismic Loads", 1990 International Timber Engineering Conference, Tokyo, Japan.
[C17] Foschi, R.O., Wang Y. and Filiatrault, A., 1990. "Random Field Modeling of Material Properties in Reliability Studies of Glued-Laminated Beams", 1990 International Timber Engineering Conference, Tokyo, Japan.
[C16] Filiatrault, A. and Cherry, S., 1990. "A Simplified Seismic Design Procedure for Friction Damped Structures", 4th U.S. National Conference on Earthquake Engineering, Palm Springs, CA, Vol. 3, pp. 479-488.
[C15] Yung, W.C.W. and Filiatrault, A., 1990. "Innovative Energy Dissipating System for Earthquake Design and Retrofit of Timber Structures", 1990 CSCE Annual Conference, Hamilton, Vol. IV-2, pp. 601-618.
[C14] Cherry, S. and Filiatrault, A., 1990. “Friction Damping: An Innovative Design Approach for Structures”, the 9th European Conference on Earthquake Engineering, Moscow, Vol. 10-A, pp. 33-45.
[C13] Cherry, S., and Filiatrault, A., 1990. "Friction Damping: An Innovative Earthquake Resistant Design Approach for Structures", the 2nd International Oleg Kerensky Memorial Conference", Glasgow, Scotland, pp. 121-127.
[C12] Folz, B. and Filiatrault, A., 1990. "Dynamic Characteristics of One-Way Stiffened Floor Systems by Finite Strip Analysis", 8th International Modal Analysis Conference, Kissimmee, Flo. Vol.2, pp. 1338-43.
[C11] Filiatrault, A., and Cherry, S., 1989. “Friction Damping Devices for Retrofit and Aseismic Design”, EERI Annual Meeting, El Cerrito, California, pp. 1-2.
[C10] Folz, B. and Filiatrault, A., and Foschi, R.O., 1989. “Analysis and Design of Wooden Floors Subjected to Occupancy Vibrations”, The 9th Canadian Hydrotechnical Conference, St. John’s, Newfoundland, pp.1-15.
[C9] Filiatrault, A., Cherry, S., 1989. “Friction Damping and Base Isolation: A Comparison of Two Innovative Aseismic Structural Systems”, The 9th Canadian Hydrotechnical Conference, St. John’s, Newfoundland, pp. 1-20.
[C8] Filiatrault, A., Cherry, S., and Byrne, P.M., 1989. “Seismic Performance of Friction Damped and Base Isolated Structures Founded on Mexico City Soils”, the 4th International Conference on Soil Dynamics and Earthquake Engineering, Mexico City, pp. 385-402.
[C7] Filiatrault, A. and Cherry, S., 1988. “Seismic Design of Simple Friction Damped Braced Frames”, The 9th World Conference on Earthquake Engineering, Tokyo-Kyoto, pp. V-809 / V-814.
[C6] Filiatrault, A. and Cherry, S., 1987. “Modal Parameter Estimation of a Steel Moment Resisting Frame From Base Excitation”, 5th International Modal Analysis Conference and Exhibit, London, pp. 1-15.
[C5] Filiatrault, A. and Cherry, S., 1987. “Experimental Studies of Friction Damped Braced Steel Frames”, The 5th Canadian Conference on Earthquake Engineering. Ottawa, Ont., pp. 867-873.
[C4] Filiatrault, A. and Cherry, S., 1986. “Seismic Tests of Friction Damped Steel Frames”, the 3rd ASCE/EMD Specialty Conference on Dynamic Response of Structures, Los Angeles, pp. 138-145.
[C3] Filiatrault, A. and Cherry, S., 1986. “Earthquake Simulator Tests of Friction Damped Braced Steel Frames”, Japan Earthquake Engineering Symposium, Tokyo, pp.1165-1170.
[C2] Filiatrault, A. and Cherry, S., 1986. “Performance Evaluation of Friction Damping Devices for Use in Aseismic Design “, ATC-17 Seminar and Workshop on Base isolation and Passive Energy Dissipation, San Francisco, CA, pp. 261-270.
[C1] Filiatrault, A. and Cherry, S., 1986. “Tests of the Behaviour of Friction Dampers in Braced Steel Frames”, the 8th European Conference on Earthquake Engineering, Lisbon, Portugal, pp. 8-5/41 - 8-5/48.
[T66] Soroushian, S., Maragakis, E. M., Zaghi, A. E., Echevarria, A., Tian, Y., Filiatrault, A. 2014. “Comprehensive Analytical Seismic Fragility of Fire Sprinkler Piping Systems,” Technical Report MCEER-14-0002, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY, 400 p.
[T65] Hamidia, M, Filiatrault, A. and Aref J. A. 2014. “Simplified Seismic Collapse Capacity-Based Evaluation and Design of Frame Buildings with and without Supplemental Damping Systems,” Technical Report MCEER-14-0001, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY, 283 p.
[T64] Pitman, Mark, Anagnostopoulou, M., and Filiatrault, A. 2013. “Seismic Qualification Tests of Operational Substation Secondary Panels, A Study for BC Hydro,” Report No. CSEE-SEESL-2014-01, University at Buffalo, State University of New York, Buffalo, NY, 170 p. (proprietary).
[T63] Tian, Y., Filiatrault, A. and Mosqueda, G. 2013. “Experimental Seismic Study of Pressurized Fire
Sprinkler Piping Subsystems,” Technical Report MCEER-13-0001, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY, 404 p.
[T62] Koliou, M., Filiatrault, A., Reinhorn, A.M. and Oliveto, N. 2012. “Seismic Protection of Electrical
Transformer Bushing Systems by Stiffening Techniques,” Technical Report MCEER-12-0002, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY, 230 p.
[T61] Pitman, Mark, Anagnostopoulou, M., and Filiatrault, A. 2012. “Seismic Qualification Tests of Live-tank Circuit Breaker,” Report No. CSEE-SEESL-2012-11, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T60] Davies, R., Retamales, R., Mosqueda, G. and Filiatrault, A. 2012. “Experimental Seismic Evaluation, Model Parameterization and Effects of Cold-Formed Steel-Framed Gypsum Partition Walls on the Seismic Performance of an Essential Facility,” Technical Report MCEER-11-0005, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY, 218 p.
[T59] Constantinou, M.C., Kalpakidis, I., Filiatrault, A. and Ecker Lay, R.A. 2011. “LRFD-Based Analysis and Design Procedures for Bridge Bearings and Seismic Isolators,” Technical Report MCEER-11-0004, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY, 270 p.
[T58] Anagnostopoulou, M., Filiatrault, A. and Aref, A. 2011. “Seismic Design and Analysis of Precast Segmental Concrete Bridge Model,” Technical Report MCEER-11-0002, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY, 202 p.
[T57] Christovasilis, I and Filiatrault, A. “Numerical and Experimental Investigations of the Seismic Response of Light-Frame Wood Structures. 2011. “Technical Report MCEER-11-0001, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY, 303 p.
[T56] Pitman, Mark, Anagnostopoulou, M., and Filiatrault, A. 2010. “Qualification of PC2 Evaporator Condenser & PF2 Closed Circuit Cooling Tower Product Liner,” Report No. CSEE-SEESL-2010-14, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T55] Pitman, M., Anagnostopoulou, M., Filiatrault, A. 2010. “Seismic Qualification of PC2 Evaporator Condenser & PF2 Clsd CircCool Tower Production Lines,” Report No. CSEE-SEESL-2010-12, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T54] Pitman, M., Anagnostopoulou, M., Filiatrault, A. 2010. “Seismic Qualification of AREVA Disconnect Switch CGVB-05 550kV with Grounding Switch STB,” Report No. CSEE-SEESL-2010-08, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T53] Pitman, M., Anagnostopoulou, M., Filiatrault, A. 2010. “Seismic Qualification of AREVA Disconnect Switch CGVB-08 362kV with Grounding Switch STB,” Report No. CSEE-SEESL-2010-07, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T52] Pitman, M., Anagnostopoulou, M., Filiatrault, A. 2010. “Seismic Qualification of Series 3000 Cooling Tower with Upgrades Structure & Restrained by Vibration Isolation System,” Report No. CSEE-SEESL-2010-06, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T51] Pitman, M., Anagnostopoulou, M., Filiatrault, A. 2010. “Seismic Qualification of Model PT2 Cooling Tower w/Upgraded Structure & Restrained,” Report No. CSEE-SEESL-2010-02, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T50] Pitman, M., Retamales, R., Filiatrault, A. 2009. “Seismic Qualification of Thybar Curbs - Carrier Rooftop Units,” Report No. CSEE-SEESL-2009-13, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T49] Pitman, M., Retamales, R., Filiatrault, A. 2009. “Seismic Qualification of Baltimore Aircoil Fluid Cooler Model FXVB-1212B-24D-P,” Report No. CSEE-SEESL-2009-12, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T48] Pitman, M., Anagnostopoulou, M., Filiatrault, A. 2009. “Seismic Qualification of AREVA GL-315 2LM 262 FD3-4 w/4m Support Structure,” Report No. CSEE-SEESL-2009-11, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T47] Pitman, M., Anagnostopoulou, M., Filiatrault, A. 2009. “Seismic Qualification of AREVA Airswitch CGVB 05 550kV According to IEEE Standard 693 (2005),” Report No. CSEE-SEESL-2009-10, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T46] Pitman, M., Anagnostopoulou, M., Filiatrault, A. 2009. “Seismic Qualification of AREVA Circuit Breaker GL-318 4LM 800kV FK3-4,” Report No. CSEE-SEESL-2009-09, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T45] Pitman, M., Anagnostopoulou, M., Filiatrault, A. 2009. “Seismic Qualification of AREVA Airswitch CGVB 05 550kV 1800kV BIL 4000A,” Report No. CSEE-SEESL-2009-08, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T44] Christovasilis, I.P., Filiatrault, A. and Wanitkorkul, A. 2007. “Seismic Testing of a Full-Scale Two-Story Light-Frame Wood Building: NEESWood Benchmark Test,” NEESWood Report No. MCEER-09-0005, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY, 216 p.
[T43] Retamales, R., Mosqueda, G., Filiatrault, A. and Reinhorn, A.M. 2008. “New Experimental Capabilities and Loading Protocols for Seismic Qualification and Fragility Assessment of Nonstructural Systems,” Technical Report MCEER-08-0026, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY, 350 p.
[T42] Wang, D. and Filiatrault, A. 2008. “Numerical and Experimental Studies of Self-Centering Post-Tensioned Steel Frames,” Technical Report MCEER-08-0017, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY, 432 p.
[T41] Filiatrault, A., Wanitkorkul, A. and Constantinou, M.C. 2008. “Development and Appraisal of a Numerical Cyclic Loading Protocol for Quantifying Building System Performance,” Technical Report MCEER-08-0013, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY, 138 p.
[T40] Kong, D., Reinhorn, A.M. and Filiatrault, A. 2008. “Testing for Seismic Qualification of 230kV Disconnect Switch - Part III,” Report No. CSEE-SEESL-2008-18, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T39] Kong, D., Reinhorn, A.M. and Filiatrault, A. 2008. “Testing for Seismic Qualification of 230kV Disconnect Switch - Part II,” Report No. CSEE-SEESL-2008-17, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T38] Kong, D., Reinhorn, A.M. and Filiatrault, A. 2008. “Testing for Seismic Qualification of 230kV Disconnect Switch - Part I,” Report No. CSEE-SEESL-2008-16, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T37] Pitman, M., Retamales, R., and Filiatrault, A. 2008. “Seismic Qualification of AREVA BCVB-G 245kV-4000A 950k BIL Disconnect Switch,” Report No. CSEE-SEESL-2008-13, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T36] Pitman, M., Retamales, R. and Filiatrault, A. 2008. “Seismic Qualification of Baltimore Aircoil VCA Evaporative Condenser,” Report No. CSEE-SEESL-2008-06, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T35] Pitman, M., Christovasilis, I.P., and Filiatrault, A. 2008. “Seismic Qualification of AREVA Disconnect Switches According to Std TET-APG-N-0001,” Report No. CSEE-SEESL-2008-01, University at Buffalo, State University of New York, Buffalo, NY, (proprietary).
[T34] Fathali, S. and Filiatrault, A. 2007. “Experimental Seismic Performance Evaluation of Isolation/Restraint Systems for Mechanical Equipment; Part 2: Light Equipment Study, “ Technical Report MCEER-07-0022, University at Buffalo, State University of New York, Buffalo, NY, 216 p.
[T33] Fathali, S. and Filiatrault, A. 2007. “Experimental Seismic-Performance Evaluation of Isolation/Restraint Systems for Mechanical Equipment; Part I: Heavy Equipment Study,” Technical Report MCEER-07-0007, University at Buffalo, State University of New York, Buffalo, NY, 174 p.
[T32] Pitman, M. and Filiatrault, A. 2007. “Seismic Qualification Baltimore Aircoil Series 3000 Cooling Towers,” Report No. CSEE-SEESL-2007-23, University at Buffalo, State University of New York, Buffalo, NY, 138 p., (proprietary).
[T31] Filiatrault, A., Wanitkorkul, A., and Albrechcinski, T.M. 2007. “Investigation of the Collapse of the University at Buffalo Geotechnical Laminar Box,” Report No. CSEE-SEESL-2007-05, University at Buffalo, State University of New York, Buffalo, NY, 219 p.
[T30] Bruneau, M., Filiatrault, A., Lee, G., O'Rourke, T., Reinhorn, A., Shinozuka, M. and Tierney, K. 2006. “White Paper on the SDR Grand Challenges for Disaster Reduction,” Technical Report MCEER-05-SP09, University at Buffalo, State University of New York, Buffalo, NY, 40 p.
[T29] Filiatrault, A., and Wanitkorkul. 2006. “Shake Table Testing of Ridg-U-Rak Rigid Based and Ridg-U-Rak Patent Pending Base Isolated Industrial Storage Racks: Final Production Unit Testing,” Report No. CSEE-SEESL-2006-19, University at Buffalo, State University of New York, Buffalo, NY, 67 p. (proprietary).
[T28] Filiatrault, A., and Wanitkorkul. 2006. “Shake Table Testing of Ridg-U-Rak Rigid Based and Ridg-U-Rak Patent Pending Base Isolated Industrial Storage Racks: Production Unit Testing,” Report No. CSEE-SEESL-2006-07, University at Buffalo, State University of New York, Buffalo, NY, 43 p. (proprietary).
[T27] Filiatrault, A. and Wanitkorkul, A. 2005. “Seismic Qualification of a Centrifugal Liquid Chiller by Shake Table Testing,” Report No. CSEE-SEESL-2005-05, University at Buffalo, State University of New York, Buffalo, NY, 80 p., (proprietary).
[T26] Filiatrault, A., Wanitkorkul, A. and Seo, J-M. 2005. “Shake Table Testing of Ridg-U-Rak Rigid Based and Ridg-U-Rak Patent Pending Base Isolated Industrial Storage Racks,” Report No. CSEE-SEESL-2005-03, University at Buffalo, State University of New York, Buffalo, NY, 51 p., (proprietary).
[T25] Wanitkorkul, A. and Filiatrault, A. 2005. “Simulation of Strong Ground Motions for Seismic Fragility Evaluation of Nonstructural Components in Hospitals,” Technical Report MCEER-05-0005, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, 170 p.
[T24] Filiatrault, A. and Wanitkorkul, A. 2005. “Seismic Qualification by Shake Table Testing of a Centrifugal Liquid Chiller according to AC-156 Testing Protocol,” Report No. CSEE-SEESL-2005-01, University at Buffalo, State University of New York, Buffalo, NY, 83 p., (proprietary).
[T23] Stearns, C. and Filiatrault, A. 2005. “Electrical Substation Equipment Interaction –Experimental Rigid Conductor Studies,” Report PEER 2004/09, Pacific Earthquake Engineering Research Center, Berkeley, CA, 79 p.
[T22] Filiatrault, A. and Wanitkorkul, A. 2004. “Shake Table Testing of Frazier Industrial Storage Pallet Racks,” Report No. CSEE-SEESL-2004-05 University at Buffalo, State University of New York, Buffalo, NY, 83 p., (proprietary).
[T21] Filiatrault, A. and Wanitkorkul, A. 2004. “Compression Tests of Carbon Fiber Mesh Reinforced Rubber Bearings,” Report No. CSEE-SEESL-2004-01, University at Buffalo, State University of New York, Buffalo, NY, 31 p., (proprietary).
[T20] Matt, H. and Filiatrault, A. 2004. “Seismic Qualification Requirements for Transformer Bushings,” Research Project Report No. SSRP-2003-12 Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 186 p.
[T19] Stearns, C. and Filiatrault, A. 2004. “Electrical Substation Equipment Interaction –Experimental Rigid Conductor Studies,” Research Project Report No. SSRP-2003-11 Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 89 p.
[T18] Collins, J.H. and Filiatrault, A. 2003. “Application of Post-Tensioned Energy Dissipating (PTED) Connections in Steel Moment Resisting Frames,” Research Project Report No. SSRP-2003-05 Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 118 p.
[T17] Filiatrault, A. and Stearns, C. 2002. “Substation Equipment Interaction – Experimental Flexible Conductor Studies,” Structural Systems Research Project Report No. SSRP-2002/09, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 164 p.
[T16] Christopoulos, C., Filiatrault, A. and Uang, C-M. 2002. “Self-Centering Post-Tensioned Energy Dissipating (PTED) Steel Frames for Seismic Regions,” Structural Systems Research Project Report No. SSRP-2002/06, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 292 p.
[T15] Filiatrault, A. and Christopoulos, C. 2002. “Guidelines, Specifications, and Seismic Performance Characterization of Nonstructural Building Components and Equipment,” Report PEER 2002/05, Pacific Earthquake Engineering Research Center, Berkeley, CA, 102 p.
[T14] Folz, B. and Filiatrault, A. 2001. “SAWS Version 1.0 - A Computer Program for Seismic Analysis of Woodframe Structures,” Structural Systems Research Project Report No. SSRP-2001/09, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 93 p.
[T13] Folz, B., Filiatrault, A., Uang, C-M. and Seible, F. 2001. “Blind Predictions of the Seismic Response of a Two-Story Woodframe House: An International Benchmark,” Structural Systems Research Project Report No. SSRP-2001/15, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 235 p.
[T12] Filiatrault, A., Christopoulos, C., and Stearns, C. 2001. “Guidelines, Specifications, and Seismic Performance Characterization of Nonstructural Building Components and Equipment,” Structural Systems Research Project Report No. SSRP-2001/13, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 126 p.
[T11] Isoda, H., Folz, B., and Filiatrault, A. 2001. “Seismic Modeling of Index Woodframe Buildings,” Structural Systems Research Project Report No. SSRP-2001/12, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 136 p.
[T10] Filiatrault, A., Kenzel, K.A., and Christopoulos, C. 2001. “Dynamic Characterization of a Seismic Filter”, Test Report No. TR-2001/06, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 130 p.
[T9] Gibson, N., Filiatrault, A. and Ashford, S.A. 2001. “Performance of Bridge joints Subjected to a Large Velocity Pulse,” Structural Systems Research Project Report No. SSRP-2001/10, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 100 p.
[T8] Filiatrault, A., and Christopoulos, C. 2001.”Shake table Tests of Buoyancy Cans,” Test Report No. TR-2001/06, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 345 p., (proprietary).
[T7] Seible, F., Ashford, S., Elgamal, A. and Filiatrault, A. 2001. “Assessment and Completion of the George E. Brown Jr. Network for Earthquake Engineering Simulation (NEES) Major Research Equipment (MRE) Portfolio”, Structural Systems Research Project Report No. SSRP-2001/07, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 17 p.
[T6] Filiatrault, A. and Christopoulos, C. 2001. “Shake Table Tests of Home Depot Shelving System”, Test Report No. TR-2001/03, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 110 p., (proprietary).
[T5] Filiatrault, A. and Christopoulos, C. 2001. “Shake Table Tests of a Base Isolation Table”, Test Report No. TR-2000/24, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 46 p., (proprietary).
[T4] Filiatrault, A., Uang, C-M., Folz, B., Christopoulos, C. and Gatto, K. 2001. “Reconnaissance Report of the February 28, 2001 Nisqually (Seattle-Olympia) Earthquake”, Structural Systems Research Project Report No. SSRP-2000/15, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 62 p.
[T3] Fischer, D., Filiatrault, A., Folz, B., Uang, C-M and Seible, F. 2001. “Shake Table Tests of a Two-Story Woodframe House”, Structural Systems Research Project Report No. SSRP-2000/15, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 58 p.
[T2] Folz, B. and Filiatrault, A. 2000. “CASHEW – Version 1.0, A Computer Program for the Cyclic Analysis of Wood Shear Walls”, Structural Systems Research Project Report No. SSRP-2000/10, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 58 p.
[T1] Filiatrault, A., Kremmidas, S., Elgamal, A. and Seible, F. 1999. “Substation Equipment Interaction – Rigid and Flexible Conductor Studies”, Structural Systems Research Project Report No. SSRP-99/09, Department of Structural Engineering, University of California, San Diego, La Jolla, CA, 218 p.