3D print 1

My 50 problems

Project 1 reflection: I created a phone charger holder so I can charge my phone and not set it down on the ground. It has a hole in it to put the charger block through, the rest of the print will sit on top of the block above the ground. The wedge on the back is support for the phone and, the smaller wedge in the front is a lip for the phone so it doesn't slide of the holder. In this project I learned how to create holes in my 3D print. I had few challenges in my project but one of my main problems was taking the right measurements and getting the measurements of the charger box. The standers that my project tied too would be empower learner because I chose what I wanted to do another stander would be innovation Designer because i created a 3D print to solve the problem of having now where to set your phone its charging. If I were to do this project again I would change the shapes I used and I would change the size of my project. This project in the future could help me with small designs on different things if I were were become a designer.